RF Exposure report

FCC ID: 2AB874018

RF Exposure Info

Download: PDF
FCCID_4421621

’C@l Report Number: 1908FS13 Rev.03 MPE Report Applicant Iconnect Product Type 802. 11ac WiFi Dual—Band AP/Bridge Trade Name : ALFA Model Number MatrixPro 2, Matrix 2X, Matrix 2, Matrix 2—EX, AP120C—AC, N52Q, APAC—5824, IWA—AP102, WA512G, AP120CU—AC PCBA, AP120C—AC PCBA, Range—ACX, Range—AC Test Specification : ANSI / IEEE Std.095.1—1992 / IEEE Std. 1528—2013 47 CFR §2.1091 47 CFR §1.1310 Received Date Mar. 22, 2019 Test Period Jul. 22, ~ Jul. 23, 2019 Issue Date Aug. 28, 2019 Issue by Approved By : ;j T LU\ TestedBy : J{yS Fow\ (Jet Lu) (Kris Pan) A Test Lab Techno Corp. No. 140—1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.0.C.) Tel : +886—3—2710188 / Fax : +886—3—2710190 Taiwan Accreditation Foundation accreditation number: 1330 Test Firm MRA designation number: TWO010 Note: 1.The test results are valid only for samples provided by customers and under the test conditions described in this report. 2.This report shall not be reproduced except in full; without the written approval of A Test Lab Technology Corporation : 3.The relevant information is provided by customers in this test report. According to the correciness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory does not take the responsibility. Page 1 of 9

Report Number: 1908FS13 Rev.03 Revision History Rev. Issue Date Revisions Revised By 00 Aug. 14, 2019 Initial Issue Jennifer Liu 01 Aug. 22, 2019 Page 9 Revised Test Result Frequency. Jennifer Liu IEEE 802.11b/g/n 2.4 GHz 20 MHz deletes channel 13 data and information. 02 Aug. 27, 2019 Jennifer Liu IEEE 802.11n 2.4 GHz 40 MHz deletes channel 11 data and information. 03 Aug. 28, 2019 Page 1 & 4 Revised Model Number. Jennifer Liu Page 2 of 9

Report Number: 1908FS13 Rev.03 Contents 1. Reference Testing Standards ............................................................................................. 4 2. Description of Equipment under Test (EUT) ....................................................................... 4 3. Human Exposure Assessment ........................................................................................... 6 4. RF Output Power ............................................................................................................... 7 5. Test Result......................................................................................................................... 9 Page 3 of 9

Report Number: 1908FS13 Rev.03 1. Reference Testing Standards Standard Description Version American National Standard safety levels with respect to human ANSI/IEEE C95.1 exposure to radio frequency electromagnetic fields, 300 KHz to 100 2005 GHz, New York. 2. Description of Equipment under Test (EUT) Iconnect Applicant No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist.,Taipei City, 114 ,Taiwan Iconnect Manufacturer No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist.,Taipei City, 114 ,Taiwan Product Type 802.11ac WiFi Dual-Band AP/Bridge Trade Name ALFA MatrixPro 2, Matrix 2X, Matrix 2, Matrix 2-EX, AP120C-AC, N52Q, Model Number APAC-5824, IWA-AP102, WA512G, AP120CU-AC PCBA, AP120C-AC PCBA, Range-ACX, Range-AC The different lies in the appearance of the material, as follows : Iron shell : MatrixPro 2 Plastic shell : Matrix 2X Iron shell / Plastic shell : Matrix 2, Matrix 2-EX, AP120C-AC, N52Q, Models APAC-5824, IWA-AP102, WA512G, AP120CU-AC PCBA, AP120C-AC PCBA , different description Range-ACX, Range-AC Due to market demand, several series models are added. rest of the spare parts such as circuit design and printed circuit boards remain the same. FCC ID 2AB874018 Frequency Range Operate Band (MHz) IEEE 802.11b / 802.11g 2412 - 2462 IEEE 802.11n 2.4 GHz 20 MHz IEEE 802.11n 2.4 GHz 40 MHz 2422 - 2452 IEEE 802.11a U-NII Band I 5180 - 5240 IEEE 802.11a U-NII Band III 5745 - 5825 Frequency Range IEEE 802.11n 5 GHz / 802.11ac 20 MHz U-NII Band I 5180 - 5240 IEEE 802.11n 5 GHz / 802.11ac 20 MHz U-NII Band III 5745 - 5825 IEEE 802.11n 5 GHz / 802.11ac 40 MHz U-NII Band I 5190 - 5230 IEEE 802.11n 5 GHz / 802.11ac 40 MHz U-NII Band III 5755 - 5795 IEEE 802.11ac 80 MHz U-NII Band I 5210 IEEE 802.11ac 80 MHz U-NII Band III 5775 Page 4 of 9

Report Number: 1908FS13 Rev.03 Max. Frequency ANT Manufacturer Model Type Gain (MHz) (dBi) External 2412-2462 5 ANT-0/ AOA-2458- Alfa Networks Inc. antenna 5150-5250 9 ANT-1 59-TM (N Type) 5725-5850 9 Antenna Information 2412-2462 5 GANT 5150-5250 9 5725-5850 9 2412-2462 8.01 Directional Gain 5150-5250 12.01 5725-5850 12.01 IEEE 802.11b / 802.11g: 2TX (CDD) IEEE 802.11n 2.4 GHz 20 MHz / 40 MHz: 2TX (MiMO) Antenna Delivery IEEE 802.11a: 2TX (CDD) IEEE 802.11ac 20 MHz / 40 MHz / 80 MHz: 2TX (MiMO) 2 RF Evaluation 0.985 mW/cm Operate Temp. Range -40 ~ 40°C The above equipment was tested by A Test Lab Techno Corp. For compliance with the requirements set forth in 47 CFR § 2.1091 / 47 CFR § 1.1310. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties Page 5 of 9

Report Number: 1908FS13 Rev.03 3. Human Exposure Assessment Due to the design and installation of this product, it is not possible to conduct SAR evaluation. This is because client either manufactures or supplies the antenna(s) that will be used in the installation of this product. Therefore, this product will be evaluated as a mobile device per 47 CFR § 1.1310 titled “Radiofrequency radiation exposure limits”, generally referred to as MPE limits. In 47 CFR § 2.1091, paragraph (b) defines a mobile device as “a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. ” This product is intended to be installed into a vehicle such that the unit is physically secured at one location. In the installation guide supplied with the product, Client has made the following statement: “IMPORTANT: To meet the FCC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user and nearby persons and the antenna”. Based on the installation of the transceiver and the antenna, the transmitters radiating structure is more than 20 cm from the user. Thus, this product is a “mobile device” as defined in section § 2.1091 paragraph (b). Exposure evaluation PG S= 4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna. Page 6 of 9

Report Number: 1908FS13 Rev.03 4. RF Output Power Average Conducted power Data Rate Frequency (dBm) Band (Mbps) (MHz) ANT-0 ANT-1 ANT-0+1 2412.0 19.28 19.79 22.55 IEEE 802.11b 1 2437.0 20.47 20.17 23.33 2462.0 19.22 18.72 21.99 2412.0 12.74 13.06 15.91 IEEE 802.11g 6 2437.0 17.37 17.41 20.40 2462.0 11.97 12.71 15.37 2412.0 12.67 13.07 15.88 IEEE 802.11n 2.4 GHz 20 MHz 13 2437.0 16.53 16.77 19.66 2462.0 12.11 12.77 15.46 2422.0 8.08 8.88 11.51 IEEE 802.11n 2.4 GHz 40 MHz 27 2437.0 14.13 14.61 17.39 2452.0 8.23 8.61 11.43 Note: The relevant measured result has the offset with cable loss already. Page 7 of 9

Report Number: 1908FS13 Rev.03 Average Conducted power Data Rate Frequency (dBm) Band (Mbps) (MHz) ANT-0 ANT-1 ANT-0+1 5180.0 15.04 14.19 17.65 5200.0 18.81 18.12 21.49 5220.0 18.80 18.29 21.56 5240.0 18.85 18.45 21.66 IEEE 802.11a 6 5745.0 20.47 20.37 23.43 5765.0 20.36 20.15 23.27 5785.0 20.35 20.00 23.19 5805.0 20.32 20.00 23.17 5825.0 20.36 20.05 23.22 5180.0 15.15 14.10 17.67 5200.0 18.86 18.23 21.57 5220.0 18.84 18.34 21.61 5240.0 18.94 18.41 21.69 IEEE 802.11ac 20 MHz 13 5745.0 20.40 20.44 23.43 5765.0 20.36 20.20 23.29 5785.0 20.41 20.12 23.28 5805.0 20.37 19.99 23.19 5825.0 20.39 20.03 23.22 5190.0 9.80 8.83 12.35 5230.0 16.90 16.23 19.59 IEEE 802.11ac 40 MHz 27 5755.0 17.86 17.83 20.86 5795.0 17.93 17.53 20.74 5210.0 6.38 5.78 9.10 IEEE 802.11ac 80 MHz 58.6 5775.0 12.47 12.29 15.39 Note: The relevant measured result has the offset with cable loss already. Page 8 of 9

Report Number: 1908FS13 Rev.03 5. Test Result max tune-up Power with Power Distance Numeric Limit Power ANT Gain Duty Duty cycle Density Antenna Band Frequency (MHz) [R] Gain (mw)/cm2 [P] (dBi) Cycle [TP] [S] (cm) [G] (mW) (mw)/cm2 (dBm) 2.4 GHz 2412-2462 1 21 23.83 8.01 6.32 1 1527.59 0.276 Wi-Fi Antenna 5150-5250 1 21 22.19 12.01 15.89 1 2633.07 0.475 5 GHz 5725-5850 1 21 23.93 12.01 15.89 1 3928.10 0.709 Note: 1. Mobile or fixed location transmitters, minimum separation distance is 21 cm, even if calculations indicate MPE distance is less. 2. We used the maximum power and gain to provide MPE results. 3. The Numeric Gain calculated by 10^(ant. Gain(dBi) /10). 4. The MPE results are evaluated by lowest data rate for WLAN. 5. The device operating IEEE 802.11 a/b mode is 2TX CDD. 6. The device operating IEEE 802.11 ac/n mode is 2TX MIMO. Simultaneous Transmitting： 2 2 Total MPE = 2.4GHz MPE + 5GHz MPE = 0.276 + 0.709 = 0.985 (mw)/cm < 1 (mw)/cm ---END--- Page 9 of 9


Document Created: 2019-08-30 16:53:40
Document Modified: 2019-08-30 16:53:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC