User manual

FCC ID: 2AB7X-S1701

Users Manual

Download: PDF
FCCID_3403826

Package Contents Quick Start Procedures Device X1 STEP 2 USB cable X1 Turn on the device pairing function of Lanyard X1 Bluetooth your smartphone/tablet. Then, press Chipper™ BT ON Quick start guide X1 “ ” to turn on the Chipper™ BT. Bluetooth® Magstripe and **Please ensure that Bluetooth® function of your EMV Card Reader Application Download & Installation smartphone/tablet is ON before device pairing. This device can support iOS (iOS 6.0 or above), Android (Android 2.1 or above), Windows Phone 8 & MS Windows. 1. Please visit APP Store or Google Play Store to download the official application before operation . STEP 3 2. Please follow APP instructions to register and login for proper Select Chipper™ BT in the Scanned Device operation. List on your smartphone/tablet. Then, your Scanned Support Operating System: iOS, Android, Windows Phone 8, MS Windows 3. For any questions, please contact the official application developer. Chipper™ BT is connected and green LED Device List will ON. www.bbpos.com Index & Accessories (Fig.1) Quick Start Procedures STEP 4 You can follow your application instruction to start the transaction process, then swipe/insert card to complete the transaction. STEP 1 For magstripe For EMV card reading **If your Chipper™ BT cannot be successfully paired with your device, please access the card reading Download the official application from APP DOWNLOAD Setting screen on your phone to choose “BT Chipper” in device list to pair accordingly.** APP Store or Google Play Store. LED Light Connect Micro USB charging cable to charge the device as shown to the right. ** Chipper™ BT is powered by an internal Lithium Polymer rechargeable battery pack that cannot be removed or replaced. Before first use, charging is required for approximately two to three hours. To prevent potential Lanyard holder electrical damage to the Chipper™ BT , please be recommended to use the Micro USB cable provided with reset button Micro USB port for the packaging only.** Power button charging operation

Cautions & Important Notes Troubleshooting FCC Caution Statements: • Ensure to turn on the Bluetooth® function of your smartphone or tablet before use. This device complies with Part 15 of the FCC Rules. Operation is subject to the Problems Recommendations • Please fully charge your Chipper™ BT before use. following two conditions: (1) This device may not cause harmful interference, and Device cannot be paired • Please press the power on button to restart your device. (2) this device must accept any interference received, including interference that • Please ensure magstripe/EMV chip of the card is facing the right direction when • Please check if you can find the device’s “Serial Number” may cause undesired operation. swiping or inserting card. (Shown on the back of device) in the “Scanned Device List” • Don’t drop, disassemble, tear, open, crush, bend, deform, puncture, shred, of your smartphone or tablet. NOTE: This equipment has been tested and found to comply with the limits for a Class microwave, incinerate, paint, or insert foreign object into the device. Doing any of Device cannot read your • Please press the power on button to turn on the device B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to which will void the Warranty. card successfully again. The device will automatically connect with your provide reasonable protection against harmful interference in a residential smartphone or tablet again. installation. This equipment generates, uses and can radiate radio frequency energy • Don’t immerse the device into water and place near washbasins or any wet and, if not installed and used in accordance with the instructions, may cause harmful • The device may be at lower battery level, please use the USB locations. Don’t spill any food or liquid on the device. Don’t attempt to dry the cable to recharge it, then retry. interference to radio communications. However, there is no guarantee that device with external heat sources, such as microwave or hair dryer. • Please ensure the device or smartphone/tablet is within the interference will not occur in a particular installation. If this equipment does cause • Don’t use any corrosive solvent or water to clean the device. Recommend using reception range. harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the dry cloth to clean the surface only. Device lost the • Please press the power on button to turn on the device interference by one of the following measures: • Don’t use any sharp tools to point the internal components or connectors, doing connection with your again. The device will automatically connect with your which may lead to malfunction and void the Warranty. smartphone or tablet smartphone or tablet again. - Reorient or relocate the receiving antenna. • Don’t try to disassemble the device to repair. Please contact your dealer for repair when the device is • The device may be at lower battery level, please use the - Increase the separation between the equipment and receiver. and maintenance. auto-off. USB cable to recharge it, then retry. - Connect the equipment into an outlet on a circuit different from that to which the • Please ensure the device or smartphone/tablet is within the receiver is connected. reception range. - Consult the dealer or an experienced radio/TV technician for help. Device does not work • Please ensure the Bluetooth® function of your smartphone Caution: Any changes or modifications not expressly approved by the party Product Specifications with your phone or tablet or tablet is turned on. • Please check the version of your operating system is responsible for compliance could void the user's authority to operate this equipment. supported for this device’s operation. Functions • EMV/PBOC Chip Card Reader This transmitter must not be co-located or operating in conjunction with any other Device cannot read • Please check if the device has power when operating and antenna or transmitter. (ISO 7816 Compliant Class A, B, C card) your card successfully ensure devices are connected. • Magnetic Stripe Card Reader • Please check if the application instructs to swipe or Dual tracks (track 1 & 2 or track 2 & 3) insert card. Communication Interface Bluetooth® 4.0, USB • Please ensure there is no obstacle in the card slots. Power & Battery Lithium polymer rechargeable battery 125mAH, 3.7V • Please check if the magstripe or chip of the card is facing the right direction when swiping or inserting card. Charging Via micro USB • Please ensure your phone/tablet is supported model for Swipe Speed 15cm - 100cm/sec this device’s operation. LED Indicator Operating – green light flashing • Please swipe or insert card with a more constant speed. Low battery level – red light flashing Device has no response • Please use a paper clip to press the reset button at the Charging – red light ON bottom for reboot. Fully charged – green light ON Support Operating System Android 2.1 or above, iOS 6.0 or above Windows Phone 8, MS Windows Product Size 61.8mm (W) x 44.5mm (H) x 14.2mm (D) Product Weight 29.8g Warranty Operating Temperature 0°C – 45°C (32°F – 113°F) Need Help? Operating Humidity Max 95% • Any damage or defects caused by a failure to follow the instruction which relate E: sales@bbpos.com | T: +852 3158 2585 Storage Temperature -20°C – 55°C (-4°F – 131°F) to this device or as the result of an accident, abuse, misuse, misapplication, product modification, improper voltage or current, acts of God, shipping Storage Humidity Max 95% damages or loss, or damage caused by service performed by anyone other than our company are expressly excluded from the warranty stated below. Room 1602, 16/F, Tower 2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, Hong Kong • We are not under any obligation to support the device for all operating www.bbpos.com environments, including but not limited to, interoperability with all current and/or future versions of software or hardware. ©2016 BBPOS Limited. All rights reserved. BBPOS and Chipper™ are either trademark or registered trademarks • Please contact the dealer for any warranty or customer support services. of BBPOS Limited. iOS is the trademark of Apple Inc. Android™ is a trademark of Google Inc. Windows® is registered trademark of Microsoft Corporation in the United States and/or other countries. All details are subject to change without prior notice. Revise v.5 / 20160923


Document Created: 2016-09-23 15:59:34
Document Modified: 2016-09-23 15:59:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC