Users Manual

FCC ID: 2AB7K-D4111

Users Manual

Download: PDF
FCCID_3646823

     For FAQs and more information, please visit:
          www.SeeNebula.com
                 support@SeeNebula.com

       +1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT)
       +44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT)
       +49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 - 11:00
       +81 03 4455 7823 (日本) 月-金 9:00-17:00
       +86 400 0550 036 (中国) 周一至周五 9:00 - 17:30




                                                               Nebula Capsule
© Anker Technology Co., Limited. All rights reserved.           Owner’s Manual
NEBULA and the NEBULA logo are trademarks of
Anker Technology Co., Limited, registered in the
United States and other countries.
Mode: D4111                                  51005000706 V01


                                                                                        EN
Table of Content           Safety Instructions
                           Read and understand all instructions before you use this
Safety Instructions   01   device. Do not make any changes or settings that are not
                           described in this manual. If physical injury, loss of data
                           or damage is caused by failure to follow instructions, the
What’s Included       04   warranty does not apply.

Overview              04   Setup
                             • To reduce the risk of fire and/or electric shock,
                                do not expose the device to rain or moisture, and
Get Started           08        objects filled with liquids, such as vases, should
                                not be placed on this device.
Settings              10     • Do not place this device on soft surfaces such as
                                tablecloths or carpets. Otherwise the device could
                                catch fire.
Specifications        17
                             • Do not place this device in areas susceptible to
                                excessive dust and dirt or near any appliance
Troubleshooting       18        generating a strong magnetic field.
                             • To prevent overheating, do not block or clog the
Notice                19        ventilation openings.
                             • Never place this device in a confined space.
                                Always leave enough space around this device for
Trademarks            22        ventilation.
                             • Protect this device against direct sunlight, heat,
Warranty              22        large temperature fluctuations and moisture.
                                Avoid extreme temperatures. The suitable
                                temperature for this device and accessories is 0°C
                                to 35°C.
                             • When this device is running for a long period
                                of time, the surface becomes hot. Shut it down
                                immediately and unplug the charger. Only after
                                this device has cooled down, you can continue to
                                operate.
                             • Always handle this device with care. Avoid
                                touching the lens. Do not allow children to handle
                                the device without supervision.
                                                                                   01


EN     •   Never place heavy or sharp objects on this device.      •   Risk of explosion! Keep batteries away from heat,
                                                                                                                              EN
       •   To avoid electric shock, do not disassemble.                sunshine or fire. Never discard batteries in fire.
       •   Use attachments or accessories specified by the         •   When the remote control is not used for a long
           manufacturer only.                                          period of time, remove the battery.
       •   Avoid extreme vibrations. It may damage the             •   Replace the remote control battery only with the
           internal components.                                        same or equivalent type.
                                                                   •   Batteries contain chemical substances, they
                                                                       should be disposed of properly.
     Hearing Safety
                                                                   •   Charge this device regularly. Do not store this
       •   To avoid hearing damage, do not listen for                  device with a completely discharged battery.
           extended periods at high volume. Set the volume
           at a safe level.                                      Cleaning

                                                                   •   Use a soft, lint-free cloth. Never use liquid,
     Charging                                                          gaseous or easily flammable cleansers (sprays,
                                                                       abrasives, polishes, alcohol) to clean.
       •   The charger type is Q183 with output voltage/
           current of DC 9V/2A. The plug is considered as          •   Do not use any liquid cleaning agents for cleaning
           disconnect device of adaptor. The charger shall             the lens, to avoid damaging the coating film on
           be installed near this product and shall be easily          the lens. Use lens cleaning paper to clean the
           accessible.                                                 lens.
       •   This charger is for indoor use only.
                                                                 Repairs
       •   When charging, place this device in an environment
           that has a normal room temperature (ranges from         •   Do not make any repairs to this device yourself.
           5°C to 25°C recommended) and good ventilation.              Only have your device repaired by an authorized
       •   Due to the used enclosure material, this device             service center.
           shall only be connected to a USB interface of           •   Improper maintenance can result in injuries or
           version 2.0 or higher. The connection to so called          damage to this device.
           power USB is prohibited.                                •   Refer all servicing to qualified service personnel.

                                                                 Caution:
     Battery                                                       • Possibly hazardous optical radiation emitted from
                                                                      this device.
       •   Do not replace the built-in battery yourself.
           Contact an authorized service center to replace it.     • Do not stare at operating beam. The bright light
                                                                      may hurt your eyes.
       •   The remote control contains coin type battery,
           which can be swallowed. Keep the remote control
           out of reach of children.

 02                                                                                                                          03


EN                                                                                                       EN
     What’s Included                             2.    Rear View

                                 NEBULA
                                  BY ANKER
                                                                                        1

                                Nebula Capsule
                                Owner’s Manual


                                                                                        2




                                                                                        3

                                                                                        4



                                                 1    Air ventilation (outlet) 2   Infrared Receiver

                                                 3    INPUT

                                                      • Connect to power supply
     Overview                                         • Connect to a USB flash drive (via supplied OTG
                                                        cable)
                                                 4    HDMI
     1.   Front View
                                                      Connect to a playback device with HDMI output

                   1
                                                 3.    Bottom View
                       1 Lens
                   2   2 Focus Adjusting knob
                       3 Loudspeaker

                   3
                                                                               1      1 Tripod socket




 04                                                                                                     05


EN                                                                                                                  EN
     4.   Top View                                             5.   Remote Control

                                               1                                  1   2

                                               2

                                                                           6                  3
                                               3
                                                                           7                  4
                                               4

                                               5                           8
                                                                                              5



      1
          • Press to switch between Bluetooth speaker
            mode and projector mode.
      2   LED indicators                                                 • Press to select an option: shutdown,
                                                                           standby, reboot or enter Bluetooth
          • Solid white: Operated in projector mode.           1
                                                                           Speaker mode.
          • Flashing blue: Ready to pair / Bluetooth pairing
            (Bluetooth speaker mode).                          1         • Press to enter / exit mouse key mode.
          • Solid blue: Bluetooth connected (Bluetooth
                                                                         • Press to confirm a selection or entry
            speaker mode).                                     2         • Pause / resume during play
          • Solid red: Charging.
          • Solid green: Fully charged.                        3               Navigation buttons
      3
                                                                         • Navigate menus or adjust the selected
                                                               4
          • Press to turn volume up / down.                                contents.
                                                                         • Access more options during play
      4                                                        5
                                                                           (available depend on the source).
          • Long press for 2 seconds to power on / off.                  • Return to a previous menu.
                                                               6
          • Press to switch between standby and
            resume when powered on.                            7         • Return to a previous menu
      5   Air ventilation (inlet)                              8         • Volume down / up

 06                                                                                                                07


EN                                                                                                                              EN
     Get Started                                                  2.     Prepare the Remote Control

     1.    Placement                                              ① For the first time use, remove the protective tab to
                                                                  activate the remote control battery.
     Place this device on a stable, flat table in front of the    ② To replace battery, unlock to open the battery
     projection surface. For best results, the projection         compartment, insert a new battery with correct polarity
     surface shall be white and flat. The distance between        (+/-) as indicated, and then close and lock the battery
     this device and the projection surface must be a             compartment.
     minimum of 0.58 meters (23”) and a maximum of 3.08
     meters (121”) to get a projection image from 20 to
     100 inches.                                                  3.     Get Started

                                                                  ① Fully charge the built-in battery before using for the
                                                                  first time by using the provided cable and charger.




                                            8m
                                        3.0
                                             1”
                                   m      12
                              0.58
                                    ”
                                  23


                                                                  ② Long press for 2 seconds on the projector to power on.
                                                                  ③ Turn the device towards a suitable projection surface
                                                                  or wall.
                                                                  ④ Rotate the focus adjusting knob to get the best
                                                                  focus.
                                                                  ⑤ For the first time use, follow the on-screen instructions
          • It is unnecessary to tilt it towards the projection   to complete the basic settings.
      T     surface. You can correct the projection image
            with the built-in keystone correction.
          • The distance between the device and the
            projection surface determines the projection               To give your Nebula Capsule the fastest, safest
                                                                   T
            image size. For the best result, set the                   recharge, use the supplied charger only.
            projection image ranging from 40 to 80 inches.



 08                                                                                                                        09


EN                                                                                                                          EN
     4.      Nebula App                                       2.      Bluetooth
     You are recommended to download the Nebula app to        A Bluetooth Speaker Mode
     easier control this device. By using this app, you can
     use your smartphone’s keyboard to input texts and        You can use this device as a Bluetooth speaker.
     use the screen as the mouse key.                         ① Press      to switch to Bluetooth speaker mode.
     ① Download the Capsule Control app from the App          ② Enable Bluetooth on your smartphone and select
     Store (iOS devices) or Google Play (Android devices).    [Nebula Capsule] as the device to be added.
     ② Enable Bluetooth on your smartphone and select
     [Nebula Capsule] as the device to be added.



                                                                             Nebula capsule




                                                              B Projector Mode

     ③ Open the Capsule Control app and follow the on-        You can use other Bluetooth headphone or speaker in
     screen instructions to complete connection setup.        projector mode.
                                                              ① Press          to access the home menu, select
     Settings                                                 [Settings] > [Bluetooth] and press            .
                                                              ② Follow the on-screen instruction to complete the
     Finish the main settings when you power on the device    connection.
     for the first time.
     1.      Network                                          3.      Projector
     This device can be connected to the Internet via a       Press      to access the home menu, select [Settings]
     wireless (Wi-Fi) connection.                             > [Projector] and press            .
     ① Press to access the home menu, select [Network]
     and press .                                                                              [Auto] / [Standard Mode] /
                                                              [Image Mode]
     ② Follow the on-screen instruction to complete the                                       [Battery Mode]
     connection.                                              [Color Temperature]             [Normal] / [Cool] / [Warm]
     Press       to access the home menu, select [Setting]    [Auto Keystone                  Enable / disable auto
                                                              Correction]                     keystone correction.
     and press       .
 10                                                                                                                        11


EN                                                                                                                        EN
                             Correct keystone manually.        5.    Other
     [Keystone Correction]
                             Default value is 0.
                             [Front]: The device is located    Press      to access the home menu, select [Settings]
                             in front of the projection        find more settings.
                             surface.
                             [Rear]: The device is located                           [General]
                             behind the projection
                             surface.                                             Select an on-screen display
                                                               [Language]
                                                                                  language.
                             [Front Ceiling]: The device
                             is hanging from the ceiling       [Keypad Tone]      Turn on / off the keypad tone.
     [Projector mode]        in an upside down position.
                             The image is rotated by 180       [Automatic Sleep
                                                                                5 min / 15 min / 30 min
                             degrees.                          Interval]
                             [Rear Ceiling]: The device is     [Background]       Select a background.
                             hanging from the ceiling in an
                             upside down position behind                           [Date&Time]
                             the projection surface. The
                             image is rotated by 180           [Automatic         Enable / disable automatic date
                             degrees and horizontal            Date&Time]         and time.
                             mirrored.                         [Date]             Manually set date.

                                                               [Time]             Manually set time.
     4.    App Manager
                                                               [Select time zone] Select time zone.
     ① Press        to access the home menu, select            [Use 24-hour       Select 24-hour format or 12-hour
     [Settings] > [App Manager] and press       .              format]            format.
     ② Select an app and check the current version, open                            [Upgrade]
     or force stop, check the storage used or clear data, or
     uninstall it.                                                                Check if it is the latest version.
                                                               [Check Update]     Follow the on-screen instructions
                                                                                  to upgrade the software version.
          When more than 3 apps are installed, you can
      T   select [All] at the bottom line of the home page                           [About]
          to enter the [Apps] page. Select an app and
          press       in the remote control, and then you                         All data on the built-in storage will
                                                               [Recovery]
                                                                                  be erased.
          can select [Move To Home] or [Uninstall].

 12                                                                                                                   13


EN                                                                                                                         EN
     Enjoy                                                         2.    Screen Cast

     1.     Connect to HDMI Playback Devices                       You can cast the screen of your smartphone or tablet
                                                                   onto the projection surface wireless.
     This device supports connections with various HDMI
     playback devices such as TV stick, TV box, DVD player,
                                                                   For iOS devices:
     set-top box (STB), game machine or other devices.
     ① Connect this device to an HDMI playback device
     with an HDMI cable (not provided).
     ② Press       to access the home menu, select [HDMI]
     and press         . (* It will automatically start the HDMI
     playback when connected to an HDMI playback device
     for the first time.)




                                                                   For Android devices:




                                                     HDMI




                                                                        Certain content may be unavailable to be casted
                                                                    T   due to copyright restrictions. In this case, you
                                                                        can stream those content via the same app
                                                                        installed in your Nebula Capsule.

 14                                                                                                                    15


EN                                                                                                                   EN
     3.     Apps                                               Specifications
     Once connected to a wireless network, you can access
     online services, enjoy movies, music and pictures, and         Specifications and design are subject to
     browse internet. Apart from the apps installed, you            change without notice.
     can also install any other apps either from the Nebula
     App Store or by a USB flash drive.                        Power supply: 9V         2A (QC2.0)
     ① Press       to access the home menu.                    Power consumption: < 10W
     ② Select an Internet service, and press         .         Standby power consumption: < 0.5W
                                                               Display technology: 0.2inch 854*480p DLP
                                                               Light source: RGB LED
                                                               Projection image size: 20 - 100 inch
     4.    Connect to USB Storage Device                       Resolution: 854 x 480 Pixel
     With this device, you can enjoy music, video, and         Brightness: 100 ANSI Lumens
     picture, or install apps that are stored on a USB 2.0     Contrast ratio: 400:1
     storage device by using the supplied OTG cable.           Throw ratio: 1.3
     ① Press
                                                               Throw distance: 0.58m to 3.08m
                  to access the home menu.
                                                               CPU: Quad core A7
     ② Select [File Manager] and press       .                 OS: Android 7.1
                                                               RAM: 1GB DDR
     ③ Select a file, then press    .                          ROM: 8GB eMMC
                                                               Bluetooth version: V4.2
                                                               USB file system: FAT32
                                                               Built-in battery type: Li-Polymer
                                                               Capacity: 5200mAh 3.85V
                                                         USB   Movie playtime: appropriate 4 hours in battery mode
                                                               Music playtime: appropriate 30 hours in bluetooth
                                                               speaker mode
                              1                  2             Remote control batteries: CR2032 x 1
                                                               Recommended ambient: 5°C to 35°C / 41°F to 95°F
                                                               Relative humidity: 15% ~ 85% (non-condensing)
                                                               Storage temperature and humidity: < 65°C / 149°F, <
                                                               90% humidity
                                                               Dimensions ((H*D)): 120 * 68 mm / 4.72*2.67 inch
                                                               Weight: 470 g / 16.6 oz

 16                                                                                                             17


EN                                                                                                                   EN
     Troubleshooting                                            Notice
     ① Fail to power on by the remote control?                      Declaration of Conformity
        • Long press      for 2 seconds on the projector to         This product complies with the radio
          power on.                                                 interference requirements of the European
                                                                    Community. Hereby, Anker Technology
        • When powered off, you cannot use the remote               Co., Limited. declares that this device is in
          control to power on.                                      compliance with the essential requirements
     ② The remote control doesn’t work?
                                                                    and other relevant provisions of Directive
                                                                    2014/53/EU. For the Declaration of
        • Remove the protective tab to activate the remote          Conformity, visit the Web site www.
          control batteries.                                        SeeNebula.com/certification.
                                                                    BT Maximum output power: 8 dBm; BT
     ③ Blurred image?                                               Frequency band: 2402~2480 MHz;
        • Rotate the focus adjusting knob to get the best           Wi-Fi Max Output Power: 16 dBm (2.4G); 10
          focus.                                                    dBm (5G);
                                                                    Wi-Fi Frequency Band: 2412~2472 MHz (2.4G);
     ④ Reversed projection image?                                   5150~5250 MHz, 5725~5850 MHz (5G).
        • Press       to access the home menu, select               5150~5250 MHz can be used indoor only.
          [Settings] > [Projector Mode] and switch to a
          correct state.
     ⑤ Cannot connect to a Wi-Fi network?                                                          ES   LU   RO
                                                                         BG   EE   BE
        • Refresh the list of available networks and retry.                                        CZ   FR   HU
                                                                                                   SI   DK   HR
        • Reboot the wireless router or the device and retry.
     ⑥ How do I update the firmware?
                                                                    Your product is designed and manufactured
        • When new version is detected, you will be asked           with high quality materials and components,
          to reboot and update.                                     which can be recycled and reused.
                                                                    This symbol means the product must not be
                                                                    discarded as household waste, and should
                                                                    be delivered to an appropriate collection
                                                                    facility for recycling. Proper disposal and
                                                                    recycling helps protect natural resources,
                                                                    human health and the environment. For more
                                                                    information on disposal and recycling of
                                                                    this product, contact your local municipality,
                                                                    disposal service, or the shop where you
                                                                    bought this product.

 18                                                                                                               19


EN                                                               limits set forth for an uncontrolled environment. This
                                                                                                                          EN
     FCC notice                                                  equipment should be installed and operated with a
                                                                 minimum distance of 20cm between the radiator and
     This device complies with the FCC rules, Part 15.
                                                                 your body. This transmitter must not be co-located
     Operation is subject to the following two conditions: (1)
                                                                 or operated in conjunction with any other antenna or
     This device may not cause harmful interference, and
                                                                 transmitter.
     (2) This device must accept any interference received,
     including interference that may cause undesired             Notice: Shielded cables
     operation.                                                  All connections to other computing devices must be
     Warning: Changes or modifications not expressly             made using shielded cables to maintain compliance
     approved by the partly responsible for compliance           with FCC regulations.
     could void the user’s authority to operate the
     equipment.
     Note: This equipment has been tested and found to
     comply with the limits for a Class B digital device,
     pursuant to part 15 of the FCC Rules. These limits are
     designed to provide reasonable protection against
     harmful interference in a residential installation.
     This equipment generates, uses and can radiate
     radio frequency energy and, if not installed and used
     in accordance with the instruction manual, may
     cause harmful interference to radio communications.
     However, there is no guarantee that interference will
     not occur in a particular installation. If this equipment
     does cause harmful interference to radio or television
     reception, which can be determined by turning the
     equipment off and on, the user is encouraged to try
     to correct the interference by one or more of the
     following measures:
     • Reorient or relocate the receiving antenna.
     • Increase the separation between equipment and
     receiver.
     • Connect the equipment into an outlet on a circuit
     different from that to which the receiver is connected.
     • Consult the dealer or an experienced radio/TV
     technician for help.
     FCC Radiation Exposure Statement:
     This equipment complies with FCC radiation exposure

 20                                                                                                                  21


EN                                                            EN
     Trademarks


     HDMI, and HDMI logo and High-Definition Multimedia
     Interface are trademarks or registered trademarks
     of HDMI licensing LLC in the United States and other
     countries.



     The Bluetooth® word mark and logos are registered
     trademarks owned by Bluetooth SIG, Inc.
     Other trademarks and trade names are those of their
     respective owners.


     Warranty
     30-Day Money-Back Guarantee for Any Reason
     You may return your undamaged product and
     packaging within 30 days of purchase to receive a
     FULL REFUND for any reason. If the reason for return
     isn’t quality-related, the customer must pay for the
     return shipping.

     12-Month Warranty for Quality-Related Issues
     Nebula’s products are warrantied to be free from
     material and workmanship defects for 12 months
     from the date of purchase. Within this period, Nebula
     will provide a replacement and cover any return
     shipping costs for products that fail in normal use.
     Please Note: Any provided shipping labels must be
     used within 20 days from the date they’re issued by
     Nebula Support.



 22                                                          23



Document Created: 2017-11-08 16:16:08
Document Modified: 2017-11-08 16:16:08

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC