RF Exposure

FCC ID: 2AB6Z-DT173-AS4G1

RF Exposure Info

Download: PDF
FCCID_3882119

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Prediction of MPE at a given distance 1. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Frequency range Electric field strength Magnetic field strength Power density Averaging time 2 (MHz) (V/m) (A/m) (mW/cm ) (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 2 3.0–30 1842/f 4.89/f *(900/f ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 2 1.34–30 824/f 2.19/f *(180/f ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 2. Test Procedure Equation from page 18 of OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to the antenna G = numeric gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna

ccIs Shenzhen Zhongjian Nanfang Testing Co., Ltd. 3. _Result Limits for Maximum Maximum General Antenna Antenna . Frequency Output Output Gain Gain Distance Fiesult2 Population/ (MHz) power power (dB) avay (cm) (mW/cm‘) Uncontrolled (dBm}) (mW) Exposure (mW/icm") BT 2402 5.48 3.53 2 1.58 20.00 0.0011 1.0 BLE 2442 6.29 4.26 2 1.58 20.00 0.0013 1.0 2. 4GW IFI 2462 14.69 29.44 2 1.58 20.00 0.0093 1.0 5GWiFi—band4 5785 14.72 29.65 2 1.58 20.00 0.0093 1.0 Note: Just the worst case mode was shown in report. Max Simultaneous MPE calculation results Made MPE Ratio Results BT+BLE+2.4GWIFI+5GWiFi 0.0011+0.0013+0.0093+0.0093 0.0210 < 1.0 4. Conclusion The device is exempt from the RF exposure evaluation.


Document Created: 2018-04-24 23:16:52
Document Modified: 2018-04-24 23:16:52
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC