RF Exposure

FCC ID: 2AB5T-KY06

RF Exposure Info

Download: PDF
FCCID_4445024

FCC ID : 2AB8T—KY06 RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz = 6 GHz and S 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. wte s 10 is 20 2s mm 150 ED m u6 155 194 300 2 ss s uo 137 450 2 as s7 so u> S 16 3 20 se 2 900 16 5 a7 C 7o 1500 12 x 57 29 m SA Test Exclusion 1900 u 2 3 a s Thresholduh) 2450 10 19 zo 3s as 3600 s is 2 3 m 5200 7 is 20 26 3 5400 6 is 19 26 3 seoo s 12 19 25 a _| The 1—g and 10—3 SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances < 50 mm are determined by: [{max. power of channel, including tune—up tolerance, mW)/(min. test separation distance, mm}] +. [/f(GH)] < 3.0 for 1—g SAR and < 7.5 for 10—9 extremity SAR.where 1(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is < 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion

FCC ID : 2AB5T-KY06 Maximum measured transmitter power. BT5.0+EDR The Worst Case Mode 2402-2480MHz Detector PEAK GFSK 7±1dBm π/4-DQPSK 7±1dBm 8DPSK 7±1dBm Remark: The worst case gain of the antenna is 3.0dBi. 3.0dBi logarithmic terms convert to numeric result is nearly 1.9952 Maximum Peak Tune up frequency Conducted Tune up Limit Mode Power Result (GHz) Output Power Power(dBm) (mW) (dBm) GFSK 2.402 7.65 8 6.309573445 1.9558 3 π/4-DQPSK 2.402 7.45 8 6.309573445 1.9558 3 8DPSK 2.402 7.33 8 6.309573445 1.9558 3 Threshold at which no SAR required is1.9558≤ 3.0 for 1-g SAR, Separation distance is 5mm.


Document Created: 2019-09-11 11:26:36
Document Modified: 2019-09-11 11:26:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC