RF exposure letter

FCC ID: 2AB5T-KY02

RF Exposure Info

Download: PDF
FCCID_4322863

                                      FCC ID :2ABST—KY02

RF EXPOSURE EVALUATION METHOD

SAR Test Exclusion Thresholds for 100 MHz ~ 6 GHz and © 50 mm

Approximate SAR Test Exclusion Power Thresholds xt Selected Frequencies and Test Separation
Distances are illustrated in the following Table.
     ed                s             10           is       20           2s              mm
      150             so             7            16      iss           194
      300             27             ss           a2      10            137
      4so             22             as           67       so           u>
      aas             i6             3            10       6e            2
      900             i6             a            a7       e            7o
     1500             12             a            a7       29           a             SAR Test
                                                                                     Exclusion
     1900          U10          *19           3.           44           34          Threshold(mW)
     2450                                     20           38           as
     3600           s           is            21           EB           m
     5200           7           13            20           26           3
     5400           6           13            19           26           32
     5eoo           6           12            19           25           a1      |


 The 1—g and 10— SAR test exclusion thrasholds for 100 MHz to 6 GHz at test separation
distances < 50 mm are determined by:
[{max. power of channel, including tune—up tolerance, mW)(min. test separation distance,
mm}] + [/f(GHe)] < 3.0 for 1—g SAR and < 7.5 for 10—4 extremity SAR.where
1(GHz) is the RF channel transmit frequency in GHz
Power and distance are rounded to the nearest mW and mm before calculation
The result is rounded to one decimal place for comparison
The test exclusions are applicable only when the minimum test separation distance is < 50
mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test
separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test
exclusion




      Maximum measured transmitter power.


                              FCC ID :2AB5T-KY02


BT4.2+EDR The Worst Case
Mode        2402-2480MHz
Detector    PEAK
GFSK        4±1dBm
π/4-DQPSK   5±1dBm
8DPSK       6±1dBm


Remark: The worst case gain of the antenna is 3dBi.
3dBi logarithmic terms convert to numeric result is nearly 1.995.



    Mode       Frequen     Maxinum Peak       Tune up      Tune up    Result       Limit
               cy           Conducted          Power        Power
                 (GHz)     Output Power        (dBm)        (mW)
                              (dBm)
    GFSK         2.441         4.51               5          3.162     0.988        3
 π/4-DQPSK       2.441         5.76               6          3.981     1.244        3
   8DPSK         2.480          6.59              7          5.012     1.579        3


Threshold at which no SAR required is1.579≤ 3.0 for 1-g SAR, Separation distance
is 5mm.



Document Created: 2019-06-17 11:34:19
Document Modified: 2019-06-17 11:34:19

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC