user_manual

FCC ID: 2AB3E-ISP99S

Users Manual

Download: PDF
FCCID_4149071

Draft 02. Do not distribute. Quickstart Guide English ( 3 – 7 ) Guía de inicio rápido Español ( 8 – 12 ) Appendix English ( 14 )

2

Quickstart Guide (English) Introduction Thank you for purchasing the Charge Time. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient. Box Contents Charge Time Power Adapter Micro-USB Cable 1/8" (3.5 mm) Stereo Aux Cable Quickstart Guide Safety & Warranty Manual Support For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. For additional product support, visit ionaudio.com/support. 3

Features Top Panel 2 1 3 4 5 6 7 8 9 10 1. Qi Charging Pad: Place your Qi-compatible device here to wirelessly charge it. See Operation > Using the Qi Charging Pad for more information. 2. Phone Cradle: Use this slot to rest a phone upright. Note: Resting tablets in the cradle is not recommended. 3. Alarm Button: Press and hold this button for 2 seconds to adjust the alarm time. See Operation > Using the Alarm for more information. 4. Clock Button: Press and hold this button for 2 seconds to adjust the time. 5. Down Button (): Tap this button to briefly display the current alarm time. Press and hold this button for 2 seconds to turn the alarm on or off. 6. Up Button (): Press and hold this button for 2 seconds to change the clock format setting. Tap this button to toggle between 12 Hour and 24 Hour clock format, and press and hold it to confirm the setting. 7. Play/Pause Button: Tap this button to play, pause or resume audio from a connected device. Press and hold this button to disconnect a Bluetooth device. 8. Minus Button (-): Tap this button to skip to the previous track on a connected device. Press and hold this button to decrease the volume. 9. Plus Button (+): Tap this button to skip to the next track on a connected device. Press and hold this button to increase the volume. 10. Qi LED: When a Qi-compatible device is charging, this LED will be lit solid green. If a charging connection cannot be established, the LED will flash red and green. If the charging area cannot detect a Qi-compatible device at all, the LED will not be lit. 4

Front Panel 1 5 3 2 4 1. Bluetooth LED: This LED will be lit solid when a Bluetooth device is connected. 2. Alarm LED: This LED will be lit solid when an alarm is enabled. 3. Display: Shows the current time, alarm time, or temperature. 4. PM LED: This LED will be lit to indicate PM time. 5. Microphone: This microphone will pick up your voice when receiving calls on a connected device. Rear Panel 3 1 2 4 5 1. Power Input: Use the included power adapter to connect this input to a power outlet. 2. Aux Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3 player, or other audio source. Note: Only one audio source (Bluetooth, Aux or USB) can play at a time. 3. Temperature Gauge: This gauge will take the current temperature to show on the display. 4. USB Port: Connect a USB flash drive to this port to play back MP3 or WAV audio files. Use the Play/Pause and Minus/Plus (-/+) buttons to control playback and volume. 5. USB Charge Port: Connect a device's charge cable here to charge it. You can simultaneously charge one device using the wireless Qi pad and one device using the wired charge port. Note: Playing music may reduce the rate of charging per device. 5

Operation Using the Qi Charging Pad To wirelessly charge your Qi-compatible device, place it on Charge Time in the Qi charging area. When a successful charging connection is made, the Qi LED will be lit green and remain solid to indicate the device is charging. If the charging area cannot establish a charging connection with a device, the Qi LED will flash green and red to alert you. Depending on the device, it may be necessary to move the device to a specific location on the top panel of Charge Time to successfully connect. This is normal for Qi charging pads. If the charging area cannot detect any Qi-compatible device, the Qi LED will not be lit. Note: • Do not leave non-Qi compatible devices in the charging area for extended periods, as this may reduce the lifetime of the Qi charging capabilities. • Do not place metallic objects, magnetic objects, or credit cards on the Qi landing pad. These will interfere with the Qi charging. • Some thick protective cases may inhibit the device from Qi charging. • If your phone vibrates, it might shift off of the Qi landing pad. It is encouraged to turn off ‘vibrate’ while Qi charging. • Qi charging may not engage if the device is simultaneously connected to a USB port. • It is normal for your phone to get warmer while charging. To extend the lifespan of your battery, if the battery gets too warm, certain phones may have software designed to limit charging above 80 percent. • It is recommended to charge in a cool location to optimize charging times. Using the Alarm To set the alarm: 1. Press and hold the Alarm button for 2 seconds. The hours' digits on the display will flash. 2. Tap the Up () and Down () buttons to set the desired hour. 3. Tap the Alarm button to switch to the minutes' digits, which will flash on the display. 4. Tap the Up () and Down () buttons to set the desired minutes. 5. Press and hold the Alarm button to confirm the alarm time. 6. Enable the new alarm by pressing and holding the Down () button. The Alarm LED will be lit solid to confirm the alarm is on. To briefly display the alarm time, tap the Down () button at any time. To enable or disable the alarm, press and hold the Down () button. When the alarm is sounding: • Press and hold the Alarm button to turn off the alarm. This does not disable or "snooze" the alarm; the alarm time will be saved and repeat at the same time the following day. • Tap any button besides the Alarm button to snooze the alarm. The alarm will repeat again after 9 minutes. 6

Adjusting the Display Brightness Press the Plus and Minus buttons at the same time to cycle through the brightness settings for the display: low, medium and high. Clock Format Press and hold the Up button for 2 seconds to change the clock format setting. Tap Up to toggle between 12 Hour and 24 Hour clock format and press and hold it to confirm the setting. Temperature Press the Alarm and Clock buttons at the same time to toggle between Celsius and Fahrenheit temperatures. Connecting a Bluetooth Device To connect a Bluetooth device: 1. Turn on your Bluetooth device. 2. If it is not already on, turn on Charge Time by connecting the power input to a power outlet using the included power adapter. 3. If you have previously paired a Bluetooth device, Charge Time will reconnect automatically. If you have not connected a device previously, Charge Time will automatically enter pairing mode. 4. Navigate to your Bluetooth device’s setup screen, find Charge Time and connect. Note: If your device requires a passcode or PIN, enter 0000. 5. The Bluetooth LED will light up solid when it is "paired." If your Bluetooth device is not able to connect to Charge Time, press and hold the Play/Pause button to break previous Bluetooth connections and reset the Bluetooth module. 6. Start playback from your Bluetooth device. IMPORTANT: If a device is connected to the auxiliary input or USB Port, Bluetooth pairing will be turned off. Disconnect the device to re-enter Bluetooth pairing mode. To disconnect a connected Bluetooth device, press and hold the Play/Pause button. 7

Appendix (English) Technical Specifications Output Power 20W (2 x 10W peak) Bluetooth Specifications Version: 4.2 Range: Up to 50 feet / 15.25 meters Supported Files Types for MP3, WAV USB Playback USB Charging Port +5 V, 1 A Qi Charging Rate 10W Power Adapter 9V, 2.5A Dimensions 7.3” x 5.7” x 2.8” (width x depth x height) 185 x 145 x 70 mm Weight 1.55 lb. 0.70 kg Specifications are subject to change without notice. Bluetooth and wireless reception and range are affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc. Trademarks & Licenses ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. The ‘Qi’ symbol is a trademark of the Wireless Power Consortium. All other product names, company names, trademarks, or trade names are those of their respective owners. 12

13

ionaudio.com Manual Version 1.0 iSP99s


Document Created: 2019-01-15 11:09:47
Document Modified: 2019-01-15 11:09:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC