Users Manual

FCC ID: 2AB2QA9BR3065WESDZ2

Users Manual

Download: PDF
FCCID_4325052

Item #1000 000 000 Table of Contents A9BR3065WESDZ02 Safety Information ................................... 2 Operation (continued) ............................. 4 Warranty................................................... 2 Troubleshooting .................................... 5 FCC Regulation .........................................3 Pre-Installation.........................................3 Operation ..................................................3 USE AND CARE GUIDE Safety Information Wireless Controlled BR30 Smart Bulb WARNING: Not for use with light dimmers. WARNING: This device is not intended for use with emergency exits. WARNING: Not for use in totally enclosed CAUTION: Risk of Shock-Turn off power before luminaires. inspection, installation, or removal. Do not open. There are no user serviceable parts inside. WARNING: For indoor use only. Do not use where directly exposed to water. Zigbee Wireless Protocol: Zigbee 3.0. This device is fully Zigbee 3.0 certified. Warranty FIVE-YEAR LIMITED WARRANTY Limited Warranty: Guaranteed to last 5 years based on 3 hours use per day, 7 days per week. If this bulb does not last 5 years after date of purchase (based on 3 hours per day / 7 days per week) due to a defect in materials or Questions, problems, missing parts? Before returning to the store, workmanship, please bring the defective bulb and a receipt indicating proof of purchase to any Home Depot store. call EcoSmart Customer Service 8 a.m. - 7 p.m., EST, The Home Depot will provide a replacement or, at our discretion, a store credit for the value of the original purchase price. Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday This warranty will be voided for misuse of product per the caution statement. Some states do not allow the exclusion of limitation or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific 1-877-527-0313 legal rights and you may also have other rights that vary from state to state and province to province. Please see a store for more details. HOMEDEPOT.COM/ECOSMART THANK YOU We appreciate the trust and confidence you have placed in EcoSmart through the purchase of this bulb. We strive to continually create quality products designed to enhance your home. Visit us online to see our full 2 line of products available for your home improvement needs. Thank you for choosing EcoSmart!

FCC Regulation Operation FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & The following are the general procedures for this smart bulb to be “included” into the your body. network. FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 Screw the bulb into a standard E26/E24 socket. 2 Open (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Amazon Alexa (if you are using Amazon Echo Plus), Wink or NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection SAMSUNG SmartThings App. 3 Add the smart LED bulb to the hub. against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 4 Control your lighting occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. □ Dimming - Increase the separation between the equipment and receiver. The LED bulb will dim to 1% -100% range using the hub app. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. □ Color Tuning -Consult the dealer or an experienced radio/TV technician for help. Use the hub app to adjust Color Temperature (CCT) of the LED bulb. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Basic Instructions IC Warning: This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic NOTE: Ensure the hub is powered on and within range of this LED bulb. Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation □ Download or update your hub manufacturer’s app. of the device. □ Turn on the LED bulb with the wall switch. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR □ The LED bulb will flash twice when turned ON to indicate that the bulb is in pairing mode. □ Open hub manufacturer’s app and follow pairing instructions. See reverse side for specific Amazon Eco Plus, d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts Wink and SmartThings instructions. de licence. L’exploitation est autorisée aux deux conditions suivantes: □ After successful pairing with the hub the LED bulb will flash twice. 1. L’appareil ne doit pas produire de brouillage; □ Control the LED bulb through your device (the wall switch mush remain ON). 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en □ The LED bulb will be ready to control only after successful pairing to the hub. compromettre le fonctionnement. □ The LED bulb is not designed to work with wall dimmers or other controlled lighting systems. □ If using a dimmer with this LED bulb, set dimmer at the highest setting for best results. Pre-Installation □ Works with Amazon Eco Plus, Wink and Smart Things hubs only. □ Refer to hub manufacturing instructions or website for scene setting, scheduling and any other app features. Package Contents Part Description Quantity See reverse side for specific Amazon Alexa (only if you are using Amazon A BR30 LED Bulb 1 Echo Plus) Wink and SmartThings instructions B User Guide 1 NOTE: If the bulb will not join the network after repeated attempts, please use the Factory Reset procedures to clear the bulb’s settings. A B Reset to Factory Setting □ Using the wall switch, physically switch ON and OFF 6 times within 2 seconds. □ The LED bulb will flash twice after a successful reset. 3 HOMEDEPOT.COM/ECOSMART 4 Please contact 1-877-527-0313 for further assistance.

Operation (continued) HUB quick start guide and pairing instructions Works with Wink □ Open the Wink app. □ Select “Add to Wink”. □ Select “Lighting”. □ Scroll down to select “Lights”. □ Select “Ecosmart Light Bulb”. □ Follow the Wink app instruction to click “Next” – “Next” – “Next”. □ Click “Connect now” (ensure the light is on and in a pairing mode). □ The LED bulb will now connect as a “Light Bulb”. □ Name and control the bulb. Works with SmartThings □ Select “Add device”. □ Select “Ecosmart”. □ Select “Light Bulbs”. □ Select “Smart Bulb”. □ Follow the SmartThings app instruction to click “Next” – “Next” – “Next”. □ Click “Connect now” (ensure the light is on and in a pairing mode). □ The LED bulb will now connect as “Light Bulb”. □ Name and control the bulb. Works with Amazon Echo Plus □ Open the Amazon Alexa app. □ Select “Add Device”. □ Select “Light”. □ Scroll down the light brand list to select “other”. □ The LED bulb will connect to Alexa by clicking “DISCOVER DEVICES” (ensure the light is on and in a pairing mode). □ Set up the device and the “light bulb” now is ready to use. □ Name and control the bulb. Troubleshooting Note: Works with Amazon Echo Plus, Wink and SmartThings hubs only. Problem Possible Cause Solution Questions, problems, missing parts? Before returning to the store, Unable to pair. Bulb not in pairing mode. Reset the bulb to factory mode. call EcoSmart Customer Service 8 a.m. - 7 p.m., EST, Unable to pair. Pairing mode has timed out. Toggle the wall switch OFF then back ON. Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday Unable to pair. No power to the bulb. Turn ON the wall switch to ensure the hub is online. 1-877-527-0313 Unable to pair or control. Bulb has joined another network. Reset the bulb to factory mode. Unable to control the bulb. Internet connection lost. Ensure there is an Internet connection. HOMEDEPOT.COM/ECOSMART Unable to control the bulb. Out of range. Move the hub closer to the bulb. Bulb flickers. Bulb connected to a wall dimmer. Replace the dimmer with a standard wall Retain this manual for future use. switch or set dimmer to max output. Bulb is slow to respond. There are Internet connection issues. Check with your ISP. Bulb is slow to respond. Obstructions between the hub and bulb. Relocate the hub closer to the bulb. 5 HOMEDEPOT.COM/ECOSMART Please contact 1-877-527-0313 for further assistance.


Document Created: 2019-05-29 14:03:41
Document Modified: 2019-05-29 14:03:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC