User Manual

FCC ID: 2AB2Q8ZB650STA4R

Users Manual

Download: PDF

                 Leedarson Bluetooth LED Bulb
                             Quick User Guide
                 Draft           Ver.                   Description                     Time
                   V            V1.0                                                   2019.2




1




                                    THANK YOU

We appreciate the trust and confidence you have placed in LEEDARSON through the purchase of
Bluetooth Light Bulb. We strive to continually create quality products designed to enhance your home. Visit
us online to see our full line of products available for your home improvement needs. Thank you for
choosing LEEDARSON!




Leedarson Lighting


Product Introduction

1.1 Basic Information

CONTROL YOUR LIGHTS FROM ANYWHERE in the world from the palm of your hand. The
Retrofit produces beautiful high quality light that you can dim or tune, and control from your
smartphone or tablet. Easy to setup, bulbs fit into your standard household sockets - no need for
installation by an electrician. A wireless network or remote controller is required to operate bulbs.
SET LIGHT SCENES: Create rich indirect light scenes in your home by dim or tune the light’s color
temperature from 2700 to 6500K . Schedule to turn on the lights so you don't come home to a dark
house. Set automated timers, or program the bulb to gradually increase brightness in the the morning
like the sunrise for a more pleasant, natural alarm.
SAVE ENERGY: LEEDARSON bulbs use up to 84% less energy than traditional incandescent bulbs
and last up to 25,000 hours making them a smart choice for energy conscious homes.


1.2 Special notes for Connected Bulbs
Line Voltage Dimmer
LEEDARSON does not recommended the use of a line voltage dimmer with connected bulbs. The
reason is that each connected bulb contains a radio and by reducing, or removing power through a line
voltage dimmer may cause the connected bulb to not function properly.




For dimming, LEEDARSON recommends using a compatible App (i.e., LEEDARSON’S LDS App) or
a compatible wireless switch that uses the same wireless protocol as the bulb.

Leedarson Lighting


1.3 Leave your fixture on
If your switch or fixture is OFF,or is turned OFF, then control and communication from the App, or
wireless switch, to the LED Bulb is lost.




Quick Start Guide
The following are the general user guide:
Step 1:
Screw the bulb into a standard socket.
Step 2:
Turn on the bulb with your wall switch to apply power to the bulb.
If you’re not using a wall switch, then use your alternate method to apply power to the bulb.
Step 3:
Get the LEEDARSON App for Android or iOS.




Step 4:
Create an account and sign in.
Step 5:
Press ‘+’ button to add the light bulb.




Step 6:
Follow the instructions on App.



Leedarson Lighting


1.4 Factory Reset Procedure
Physically switch the bulb on and off six (6) times for intervals of 0.5-2seconds. After the 6thtime, the
bulb will flash twice indicating that it’s successfully reset.




                                               Warning
FCC Supplier’s Declaration of Conformity
8Zy-BR650ST-A4R
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Supplier’s name: Opened Box Returns LLC
Supplier’s address (USA): 1790 Swarthmore Ave., Unit 6, Lakewood NJ 08701 USA
Supplier’s phone number and / or internet contact information: usaservice@innr.com

NOTE: The grantee is not responsible for any changes or modifications not expressly approved by
the party responsible for compliance. Such modifications could void the user ’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
 - Reorient or relocate the receiving antenna.
 - Increase the separation between the equipment and receiver.
Leedarson Lighting


 -Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 -Consult the dealer or an experienced radio/TV technician for help


RF Exposure Statement
 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.


IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.


IC 20cm RF
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm between the
radiator and your body.

Cet équipement est conforme aux limites d’exposition aux rayonnements de la IC établies pour un
environnement non contrôé. Cet équipement doit être installé et fonctionner à au moins 20 cm de
distance d’un radiateur ou de votre corps.


Product List
      Model No.            Rated Power(W)           Rated Volt.(V)        Frequency(Hz)
  8Zy-BR650ST-A4R                  7.4                     120                   60




This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.


Safety Instructions:
Please read, keep and follow these instructions before installation:


Leedarson Lighting


1) Switch off the power supply to the socket and allow sufficient time for the bulb to cool before
   removing the bulb from the fitting
2) Warning: Risk of Electric Shock. Do not attempt to disassemble bulb.
3) Not suitable for use with standard wall dimmers
4) Suitable for use in operation environment between -4℉ and 104℉(-20℃ and 40℃)
5) Not for use in emergency lighting.
6) The bulb is not suitable for totally enclosed fixtures.
7) Do not clean the bulb when it is on and connected to the power supply
8) Do not place the bulb on hot surfaces
9) Dispose of this device in accordance with disposal laws in your area.




Leedarson Lighting



Document Created: 2019-05-05 10:31:09
Document Modified: 2019-05-05 10:31:09

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC