NA10A Smart Plug User Guide

FCC ID: 2AB2Q7CPLBA1

Users Manual

Download: PDF
FCCID_4294464

Use and Care Guide Smart Plug(BLE)

1 Safety information waRrNING: + For indoor use only. Do not use in wet locations. + The total current lmit of the device is Plug for Europe countries 10A& Plug for America countries 10 A. Donot exceed this value! + If a direct short is created on the output, the Smart Plug will be damaged and no longer function. + Do not disassemble the product, or make repairs yourself You run the risk of electric shock and voiding the imited warranty. Ifyou need service, please contact us. + Do not connect after each other (DE: Nicht hintereinander stecken) + To disconnect voltage pull the plug (DE: Spannungsfrei nur bei gezogenem Stecker) + Do not position the equipment so that it is difficult to operate the disconnecting device. + The equipment shall be connected to a MAINS socket outlet with a protective earthing connection. oo Electrical and electronic equipment that is no longer usable and defective or used batteries must be separated from other waste and recycled in an environmentally friendly manner (European Directive on waste electrical and electronic equipment). To dispose of electrical and electronic equipment or batteries, use your country—specific return and collection systems. 2 Package Contents Smart Plug *L Quick start guide*1. 3 Product Description The plug tuns your electrical appliances smart by enabling you to control them through the smart home APP on your phoneat or away from home. It also enables you to automatically switch appliances on and off according to a programmable timer and measure the energy consumption. LED Indicator: Under normal working state, Green—on, Red—off.

Icon Status Behavior Stow Breathing Green Plug initiated,is ready to start plug network coniquration \Y/ quick Blinking Green Connecting to the network or disconnected from the network Solid Green Connected to the network and plug is tuned on Red the Smart plug is Switched off Spedification Input Eu: 2300750 NA: 1200 , 60e output EU: 230V7,50He, Max 10A NA 12007,60He, Ma 10A Operation Frequent Range BLE, 2400—2483.5MHz Maximum RF Output Power 6dBm 0 perating ting t temperature t weas c Operating Humidity 5—85%RH, Non—condensing Certification ce 4 Installation and Operation Step 1. Download and install the App Get the Amoo APP in Apple store or Google Play Step 2. Register and login Open the app, and it willtake you through creating an account and login to the home screen. Step3. Add the Plug A Turn on the Bluetooth of your smartphone B Connect the smart plug to a grounded wall socket, back to the app to start plug set up. From the home screen press the "+" symbolto add plug, follow the in—app instruction to complete setup. 5 Function

5.1 Remote Control: Turn your electronic device on and off from anywhere using the mobile app. 5.2 Schedule: Set specific times for your device to turn on/off as setting connected lighting turn on at 19:00 every Monday. Or like setting lights to come on at dusk or turn off at sunrise. 6 Trouble shooting 1. Q: What devices can I control with the Smart Plug? A: You can control lights, fans, humidifiers, portable heaters, and any small appliances in accordance with the Smart Plug’s specifications. 2. Q: What can i do, if Arnoo app cannot searched the Smart Plug. A: Make sure your smartphone’s Bluetooth is turned on then Press and hold the power key 5s to reset your plug. Try to add process again. 3. Q: How to factory reset the smart plug. A: Press and hold the power key 5s until the Led indicator blinks green slowly.

FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC 20cm RF This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux rayonnements de la IC établies pour un environnement non contrôé. Cet équipement doit être installé et fonctionner à au moins 20 cm de distance d’un radiateur ou de votre corps. ------------------------------------------------------------------------------------------ For more information, Welcome visit: www.leedarson.com. Mail to: iot@leedarson.com LEEDARSON LIGHTING CO., LTD. XINGDA RD, XINGTAI INDUSTRIAL ZONE, CHANGTAI COUNTY, ZHANGZHOU,FUJIAN, 363900, CHINA


Document Created: 2019-03-05 18:50:17
Document Modified: 2019-03-05 18:50:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC