UserMan

FCC ID: 2AB2Q-Y-A880ST-Q1R

Users Manual

Download: PDF
FCCID_2533894

LED User Manual Model: y-A880ST-Q1R-xx Electronic Data Parameter Min. Rated Max. Remark Units Supply Voltage V 90 120 132 Supply Frequency Hz 60 Supply Current mA 88 Power Consumption W 8.5 9.5 10.5 Power Factor - 0.9 Drive output voltage V 48 Drive output current mA 153 170 187 LED Data LED Model - 3535 LED Circuit Mode - 8S2P LED Vendor - / Chromaticity Data Parameter Min. Rated Max. Remark Units Luminous Flux lm 800 880 Max Luminous cd 94 Intensity 0.5 Imax：240 Beam Angle ° 0.1 Imax：330 Luminous Efficiency lm/W 90 CRI - 80 CCT K 2580 2725 2870 SCDM - Dominant nm Wavelength Dimming % Wireless Rated luminous flux 0 0 lm in a 90 (Φ90 ） Rated luminous flux 0 0 lm in a 120 (Φ120 ） Energy Efficiency - Index (EEI)

% 5 100 Light Distribution Curve Parameter Min. Rated Max. Remark Units Standard IEEE 802.15.4 Wireless frequency GHz 2.4 2.4GHz ~ Operating Frequency 2.5GHz Protocol - ZigBee HA 1.2 In door direct range, Effective Indoor no walls or other m 40 Connection Range obstacles in between. Wireless IC NXP JN5168A Wireless Module Part A470S-A7R-01- number B Antenna PCB Antenna Operating Condition Parameter Min. Rated Max. Remark Units Operating Ambient ℃ -20 25 40 Temperature 25℃ Rated Lamp Life H 25000 L70,F50 Starting Time s 0.5 Lamp Warms-up time to s 60% Φ Lamp Warms-up time to s 95% Φ

mm Drawings State Behavior description 1 Factory state Fast 2 flashes, keep constant light (max 2 The match state 1 flashes Adjustable lighting, each power up both to maintain the 3 Network status brightness of Max 4 Turn off the lights action Within 1 second down to the dark after the close 1 flashes, into the dark. And not the net, to re join the 5 From the network state new network, you need to supply a. Fast switch 5 times, power on time maintained at between 0.5‐2 seconds. The sixth time after power on a 6 Reset action second after 2 flashes of 100ms /100ms is the most dark bright. If you want to re join the new network, you need to supply a. Company: LEEDARSON LIGHTING CO., LTD. Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Contact Person: Vick Zhang TEL: +86‐592‐3699897 E‐mail: cert@leedarson.com

FCC Warning This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.


Document Created: 2015-02-11 16:05:06
Document Modified: 2015-02-11 16:05:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC