Test report

FCC ID: 2AB22ESWO1-USA

Test Report

Download: PDF
FCCID_3114490

Test Report Report No.: MTi160711E006 Date of issue: Jul. 27, 2016 Sample Description: Etekcity Voltson Smart Wifi Outlet Model(s): ESWO1-USA Applicant: Etekcity Corporation Address: 1202 N Miller St Suite A, Anaheim, CA 92806 Date of Test: Jul. 11, 2016 to Jul. 26, 2016 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 2 of 29 - Report No.: MTi160711E006 Table of Contents 1 General description ............................................................................................................... 5 1.1 Feature of equipment under test (EUT) ............................................................................... 5 1.2 Operation channel list .......................................................................................................... 5 1.3 Test frequency channel........................................................................................................ 5 1.4 EUT operation mode ........................................................................................................... 5 1.5 Test conditions ..................................................................................................................... 5 1.6 Testing site .......................................................................................................................... 6 1.7 Ancillary equipment list ........................................................................................................ 6 1.8 Measurement uncertainty .................................................................................................... 6 2 List of test equipment ........................................................................................................... 7 3 Test Result ............................................................................................................................. 8 3.1 Conducted emission ............................................................................................................ 8 3.2 Antenna requirement ......................................................................................................... 11 3.3 Maximum output power ..................................................................................................... 12 3.4 6dB emission bandwidth.................................................................................................... 13 3.5 Power spectral density ...................................................................................................... 17 3.6 Band edge ......................................................................................................................... 21 3.7 Radiated emission ............................................................................................................. 25 Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 3 of 29 - Report No.: MTi160711E006 Test Result Certification Applicant’s name: Etekcity Corporation Address: 1202 N Miller St Suite A, Anaheim, CA 92806 Manufacture's Name: SHENZHEN DEDO TECH CO., LTD The 3rd floor, building 3, zhongyu technology garden, Address: heshuikou, gongming, guangming district, Shenzhen city Product description Product name: Etekcity Voltson Smart Wifi Outlet Trademark: / Model name: ESWO1-USA Standards: FCC Part 15.247 ANSI C63.10-2013 Test Procedure: 558074 D01 DTS Meas Guidance v03r05 This device described above has been tested by Shenzhen Toby Technology Co., Ltd. and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: David Chen Jul. 27, 2016 Reviewed by: Leon Chen Jul. 27, 2016 Approved by: Ares Liu Jul. 27, 2016 Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 4 of 29 - Report No.: MTi160711E006 Summary of Test Result Item FCC Part No. Description of Test Result 1 15.203 Antenna requirement Pass 2 15.207 AC power line conducted emission Pass 3 15.247(b)(3) Maximum output power Pass 4 15.247(a)(2) 6dB emission bandwidth Pass 5 15.247(e) Power spectral density (PSD) Pass 8 15.247(d) Band edge & conducted spurious emission Pass 15.247(d), 15.205, 9 Radiated emission Pass 15.209 Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 5 of 29 - Report No.: MTi160711E006 1 General description 1.1 Feature of equipment under test (EUT) Product name: Etekcity Voltson Smart Wifi Outlet Model name: ESWO1-USA Operating frequency range: 2412MHz~2462MHz for 802.11b/g/n20 802.11b 802.11g WIFI feature: 802.11n20 802.11n40 Modulation type: DSSS, OFDM Antenna specification: PCBA antenna, the peak antenna gain is 1dBi. 1.2 Operation channel list Channel Frequency Channel Frequency Channel Frequency 1 2412MHz 6 2437MHz 11 2462MHz 2 2417MHz 7 2442MHz -- -- 3 2422MHz 8 2447MHz -- -- 4 2427MHz 9 2452MHz --- --- 5 2432MHz 10 2457MHz --- --- 1.3 Test frequency channel Channel 802.11b/g/n20 802.11n40 Low 2412MHz / Middle 2437MHz / High 2462MHz / 1.4 EUT operation mode During testing, RF test program provided by the manufacture to control the Tx operation followed the test requirement. The EUT is configured to transmit continuously (duty cycle > 98 %) at the maximum power control level. 1.5 Test conditions During the measurement the environmental conditions were within the listed ranges: - Temperature: 20ºC~30ºC - Humidity: 30%~70% - Atmospheric pressure: 98kPa~101kPa Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 6 of 29 - Report No.: MTi160711E006 1.6 Testing site Test Site Shenzhen Toby Technology Co., Ltd. 1 A/F., Bldg.6, Yusheng Industrial Zone The National Road Test Site Location No.107 Xixiang Section 467, Shenzhen, Guangdong, China FCC Registration No.: 811562 CNAS Registration No.: CNAS L5813 1.7 Ancillary equipment list Equipment Model S/N Manufacturer Certificate type / / / / / 1.8 Measurement uncertainty Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) RF frequency 1 x 10-7 RF power, conducted ± 1 dB Conducted emission(150kHz~30MHz) ± 2.5 dB Radiated emission(30MHz~1GHz) ± 4.2 dB Radiated emission (above 1GHz) ± 4.3 dB Temperature ±1 degree Humidity ±5% Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 7 of 29 - Report No.: MTi160711E006 2 List of test equipment For AC power line conducted emission: Equipment Manufacturer Model Serial No. Calibration Due LISN R&S ENV216 101313 2016.12.06 LISN SCHWARZBECK NNLK 8129 8129245 2016.12.25 Pulse Limiter SCHWARZBECK VTSD 9561F 9716 2016.12.25 Test Cable N/A N/A C01 2016.12.06 EMI Test Receiver R&S ESCI 101160 2016.12.06 For Radiated emission: Equipment Manufacturer Model Serial No. Calibration Due MESS-ELEKTRO Log-Bicon Antenna VULB 9160 3058 2016.12.11 NIK Horn Antenna Schwarzbeck BBHA 9120D 631 2016.12.05 Horn Antenna Schwarzbeck BBHA 9170 373 2016.12.05 Test Cable United Microwave 57793 1m 2016.12.05 Test Cable United Microwave A30A30-5006 10m 2016.12.05 Microwave Agilent 8449B 3008A01714 2016.12.05 Pre_amplifier Pre-Amplifier Anritsu MH648A M09961 2016.12.05 EMI Test Receiver R&S ESPI-7 101318 2016.12.05 Spctrum analyzer Agient E4470B MY41441082 2017.06.01 For RF conducted emission: Equipment Manufacturer Model Serial No. Calibration Due Spctrum analyzer Agient E4470B MY41441082 2017.06.01 Power meter Anritsu ML2495A 1005002 2016.09.11 Power Senor Anritsu MA2411B 0917070 2016.09.11 Note: the calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 8 of 29 - Report No.: MTi160711E006 3 Test Result 3.1 Conducted emission 3.1.1 Limit Frequency Limit (MHz) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 Note: Decreases with the logarithm of the frequency from 0.15MHz to 0.5MHz. 3.1.2 Test method 1. The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipment powered from additional LISN(s). The LISN provide 50 Ohm/50uH of coupling impedance for the measuring instrument. 2. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. 3. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. 4. LISN is at least 80 cm from nearest part of EUT chassis. 5. The resolution bandwidth of EMI test receiver is set at 9 kHz. 3.1.3 Test Result Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 9 of 29 - Report No.: MTi160711E006 Temperature: 26℃ Relative 44% H idi Pressure: 101kPa Polarization: L Test voltage: AC 120V/60Hz Test mode: Transmitting Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 10 of 29 - Report No.: MTi160711E006 Temperature: 26℃ Relative 44% H idi Pressure: 101kPa Polarization: N Test voltage: AC 120V/60Hz Test mode: Transmitting Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 11 of 29 - Report No.: MTi160711E006 3.2 Antenna requirement 3.2.1 Requirement defined in FCC 15.203 An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. This requirement does not apply to carrier current devices or to devices operated under the provisions of §15.211, §15.213, §15.217, §15.219, or §15.221. Further, this requirement does not apply to intentional radiators that must be professionally installed, such as perimeter protection systems and some field disturbance sensors, or to other intentional radiators which, in accordance with §15.31(d), must be measured at the installation site. However, the installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this part are not exceeded. 3.2.2 EUT antenna description The WIFI antenna of EUT is a PCB antenna, the maximum gain of the antenna is 1dBi. So the antenna meets the requirement of this part. Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 12 of 29 - Report No.: MTi160711E006 3.3 Maximum output power 3.3.1 Limits Conducted output power limit is 1W (30dBm). 3.3.2 Test Method The maximum conducted output power may be measured using a broadband RF power meter. The power meter shall have a video bandwidth that is greater than or equal to the DTS bandwidth and shall utilize a fast-responding diode detector. 3.3.3 Test Result Maximum peak output Frequency (MHz) Limit (dBm) power (dBm) 802.11b 2412 17.69 30 2437 17.65 30 2462 17.65 30 802.11g 2412 17.49 30 2437 17.32 30 2462 16.95 30 802.11n20 2412 17.09 30 2437 17.17 30 2462 17.22 30 Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 13 of 29 - Report No.: MTi160711E006 3.4 6dB emission bandwidth 3.4.1 Limits The minimum 6 dB bandwidth shall be at least 500 kHz. 3.4.2 Test method Use the following spectrum analyzer settings: RBW = 100kHz VBW ≥ 3RBW Detector = peak Trace mode = max hold Sweep time = auto couple Allow the trace to stabilize, measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. 3.4.3 Test result 6dB emission bandwidth Frequency (MHz) Limit (MHz) 802.11b 2412 8.326 2437 8.33 500kHz 2462 8.267 802.11g 2412 16.584 2437 16.571 500kHz 2462 16.543 802.11n20 2412 17.711 2437 17.734 500kHz 2462 17.751 Test plots as below: Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 14 of 29 - Report No.: MTi160711E006 802.11b mode 2412MHz 2437MHz 2462MHz Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 15 of 29 - Report No.: MTi160711E006 802.11g mode 2412MHz 2437MHz 2462MHz Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 16 of 29 - Report No.: MTi160711E006 802.11n20 mode 2412MHz 2437MHz 2462MHz Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 17 of 29 - Report No.: MTi160711E006 3.5 Power spectral density 3.5.1 Limits The power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8dBm in any 3kHz band during any time interval of continuous transmission. 3.5.2 Test method Span = 1.5 times DTS bandwidth (6dB emission bandwidth, see section 4.4) RBW = 3kHz to 100kHz VBW ≥ 3RBW Detector = Peak Sweep time = auto Trace mode = max hold Allow the trace to stabilize. Use the peak marker function to determine the maximum amplitude level within the RBW. 3.5.3 Test result Frequency (MHz) PSD (dBm/100kHz) Limit (dBm/3kHz) 802.11b 2412 6.381 2437 6.066 8 2462 6.18 802.11g 2412 3.111 2437 3.038 8 2462 2.948 802.11n20 2412 2.881 2437 2.838 8 2462 2.932 Test plots as below: Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 18 of 29 - Report No.: MTi160711E006 802.11b mode 2412MHz 2437MHz 2462MHz Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 19 of 29 - Report No.: MTi160711E006 802.11g mode 2412MHz 2437MHz 2462MHz Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 20 of 29 - Report No.: MTi160711E006 802.11n20 mode 2412MHz 2437MHz 2462MHz Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 21 of 29 - Report No.: MTi160711E006 3.6 Band edge 3.6.1 Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30dB instead of 20dB. 3.6.2 Test method Use the following spectrum analyzer settings: Set RBW = 100 kHz. VBW ≥ 3RBW. Detector = peak, Sweep time = auto couple, Trace mode = max hold. 3.6.3 Test Result Test plots as below: Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 22 of 29 - Report No.: MTi160711E006 802.11b mode, Band edge Low edge Up edge Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 23 of 29 - Report No.: MTi160711E006 802.11g mode, Band edge Low edge Up edge Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 24 of 29 - Report No.: MTi160711E006 802.11n20 mode, Band edge Low edge Up edge Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 25 of 29 - Report No.: MTi160711E006 3.7 Radiated emission 3.7.1 Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30 dB instead of 20dB. Attenuation below the general limits defined in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits defined in §15.209(a). Radiated emission limits defined in FCC 15.209: Frequency Field strength Field strength Measurement Detector (MHz) μV/m dBμV/m distance 30-88 100 40 QP 88-216 150 43.5 QP 216-960 200 46 QP 3m 960-1000 500 46 QP Above 1000 500 54 AV Above 1000 5000 74 PK Restricted bands defined in FCC 15.205: MHz MHz MHz GHz 0.090-0.110 16.42-16.423 399.9-410 4.5-5.15 0.495-0.505 16.69475-16.69525 608-614 5.35-5.46 2.1735-2.1905 16.80425-16.80475 960-1240 7.25-7.75 4.125-4.128 25.5-25.67 1300-1427 8.025-8.5 4.17725-4.17775 37.5-38.25 1435-1626.5 9.0-9.2 4.20725-4.20775 73-74.6 1645.5-1646.5 9.3-9.5 6.215-6.218 74.8-75.2 1660-1710 10.6-12.7 6.26775-6.26825 108-121.94 1718.8-1722.2 13.25-13.4 6.31175-6.31225 123-138 2200-2300 14.47-14.5 8.291-8.294 149.9-150.05 2310-2390 15.35-16.2 8.362-8.366 156.52475-156.52525 2483.5-2500 17.7-21.4 8.37625-8.38675 156.7-156.9 2690-2900 22.01-23.12 8.41425-8.41475 162.0125-167.17 3260-3267 23.6-24.0 12.29-12.293 167.72-173.2 3332-3339 31.2-31.8 12.51975-12.52025 240-285 3345.8-3358 36.43-36.5 12.57675-12.57725 322-335.4 3600-4400 Above 38.6 13.36-13.41 Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 26 of 29 - Report No.: MTi160711E006 3.7.2 Test method 1. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 2. Use the following spectrum analyzer settings: Span = wide enough to fully capture the emission being measured, RBW = 1 MHz for f ≥ 1GHz, 100 kHz for f < 1 GHz, VBW ≥ RBW, Sweep = auto, Detector function = peak, Trace = max hold 3. Follow the guidelines in ANSI C63.4-2014 with respect to maximizing the emission by rotating the EUT, adjusting the measurement antenna height and polarization, etc. The peak reading of the emission, after being corrected by the antenna factor, cable loss, pre-amp gain, etc., is the peak field strength, submit this data. Each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 4. Set the VBW to 10 Hz, while maintaining all of the other instrument settings. This peak level, once corrected, must comply with the limit specified in Section 15.209. If the duty cycle per channel of the hopping signal is less than 100ms, then the reading obtained with the 10 Hz VBW may be further adjusted by a “duty cycle correction factor”, derived from 20log(duty cycle/100ms), in an effort to demonstrate compliance with the 15.209 limit. Submit this data. 3.7.3 Test Result Remark: If the PK measured values lower than average mode limit, the EUT shall be deemed to meet average limits and then no additional average mode measurement performed. Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 27 of 29 - Report No.: MTi160711E006 802.11b: 2412MHz Ant. Frequency Emission level Limits Polarization Detector Result Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 35.3 43.5 QP Spurious emission 159.79 H 39.6 43.5 QP Spurious emission 2390 V 51.06 74 PK Restricted bands 2390 H 50.67 74 PK Restricted bands 4824 V 52.39 74 PK Pass Restricted bands 4824 H 55.22 74 PK Restricted bands 4824 H 52.87 54 AVG Restricted bands 7236 V 50.49 74 PK Spurious emission 7236 H 51.42 74 PK Spurious emission 802.11b: 2437MHz Ant. Frequency Emission level Limits Polarization Detector Result Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 36.2 43.5 QP Spurious emission 159.79 H 39 43.5 QP Spurious emission 4874 V 52.23 74 PK Restricted bands 4874 H 54.71 74 PK Pass Restricted bands 4874 H 52.36 54 AVG Restricted bands 7311 V 51.57 74 PK Restricted bands 7311 H 51.84 74 PK Restricted bands 802.11b: 2462MHz Ant. Frequency Emission level Limits Polarization Detector Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 35.8 43.5 QP Spurious emission 159.79 H 39.5 43.5 QP Spurious emission 2483.5 V 48.54 74 PK Pass Restricted bands 2483.5 H 47.56 74 PK Restricted bands 4924 V 51.27 74 PK Restricted bands 4924 H 52,65 74 PK Restricted bands 7386 V 50.33 74 PK Restricted bands 7386 H 51.54 74 PK Restricted bands Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 28 of 29 - Report No.: MTi160711E006 802.11g: 2412MHz Ant. Frequency Emission level Limits Polarization Detector Result Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 35.7 43.5 QP Spurious emission 159.79 H 40.1 43.5 QP Spurious emission 2390 V 61.89 74 PK Restricted bands 2390 V 44.65 54 AVG Restricted bands 2390 H 63.42 74 PK Restricted bands Pass 2390 H 47.03 54 AVG Restricted bands 4824 V 51.82 74 PK Restricted bands 4824 H 50.14 74 PK Restricted bands 7236 V 49.15 74 PK Spurious emission 7236 H 51.99 74 PK Spurious emission 802.11g: 2437MHz Ant. Frequency Emission level Limits Polarization Detector Result Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 36.2 43.5 QP Spurious emission 159.79 H 39.7 43.5 QP Spurious emission 4874 V 52.37 74 PK Restricted bands Pass 4874 H 50.45 74 PK Restricted bands 7311 V 52.34 74 PK Restricted bands 7311 H 50.66 74 PK Restricted bands 802.11g: 2462MHz Ant. Frequency Emission level Limits Polarization Detector Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 34.5 43.5 QP Spurious emission 159.79 H 39.3 43.5 QP Spurious emission 2483.5 V 56.13 74 PK Restricted bands 2483.5 V 39.18 54 AVG Pass Restricted bands 2483.5 H 58.31 74 PK Restricted bands 2483.5 H 41.02 54 AVG Restricted bands 4924 V 52.49 74 PK Restricted bands 4924 H 50.52 74 PK Restricted bands 7386 V 52.64 74 PK Restricted bands 7386 H 51.16 74 PK Restricted bands Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 29 of 29 - Report No.: MTi160711E006 802.11n20: 2412MHz Ant. Frequency Emission level Limits Polarization Detector Result Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 35.7 43.5 QP Spurious emission 159.79 H 39.5 43.5 QP Spurious emission 2390 V 59.56 74 PK Restricted bands 2390 V 42.78 54 AVG Restricted bands 2390 H 60.77 74 PK Restricted bands Pass 2390 H 45.14 54 AVG Restricted bands 4824 V 51.57 74 PK Restricted bands 4824 H 49.83 74 PK Restricted bands 7236 V 50.66 74 PK Spurious emission 7236 H 49.97 74 PK Spurious emission 802.11n20: 2437MHz Ant. Frequency Emission level Limits Polarization Detector Result Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 34.8 43.5 QP Spurious emission 159.79 H 38.7 43.5 QP Spurious emission 4874 V 49.7 74 PK Restricted bands Pass 4874 H 51.47 74 PK Restricted bands 7311 V 50.62 74 PK Restricted bands 7311 H 51.89 74 PK Restricted bands 802.11n20: 2462MHz Ant. Frequency Emission level Limits Polarization Detector Comment (MHz) H/V dBμV/m dBμV/m 159.79 V 36.1 43.5 QP Spurious emission 159.79 H 40.2 43.5 QP Spurious emission 2483.5 V 55.88 74 PK Restricted bands 2483.5 V 40.22 54 AVG Pass Restricted bands 2483.5 H 58.2 74 PK Restricted bands 2483.5 H 42.48 54 AVG Restricted bands 4924 V 51.98 74 PK Restricted bands 4924 H 51.23 74 PK Restricted bands 7386 V 52.55 74 PK Restricted bands 7386 H 51.46 74 PK Restricted bands ----END OF REPORT---- Tel:(86-755)88850135 Fax: (86-755) 88850136 http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


Document Created: 2016-08-23 01:37:04
Document Modified: 2016-08-23 01:37:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC