18_ESW10-USA RFExp r1

FCC ID: 2AB22-ESW10-USA

RF Exposure Info

Download: PDF
FCCID_4482052

MPE REPORT FCC ID: 2AB22-ESW10-USA Date of issue: Sept. 26, 2019 Report number: MTi19082802-2E2 Sample description: Etekcity Voltson Mini Smart WiFi Outlet Model(s): ESW10-USA Applicant: Etekcity Corporation Address: 1202 N Miller St. Suite A, Anaheim, CA 92806, USA Date of test: Sept. 03, 2019 to Sept. 26, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 2 of 4 - Report No.: MTi19082802-2E2 TEST RESULT CERTIFICATION Applicant’s name: Etekcity Corporation Address: 1202 N Miller St. Suite A, Anaheim, CA 92806, USA Manufacture's name: Dongguan Raiwee Electronic Technology Co., Ltd Address: Building 11, Antouling, Industry Avenue, Qinghu Village, Qishi Town, Dongguan, Guangdong 523000, China Product name: Etekcity Voltson Mini Smart WiFi Outlet Trademark: ETEKCITY Model and/or type reference . : ESW10-USA Serial model ........................... : N/A RF exposure procedures ....... : KDB 447498 D01 v06 This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Danny Xu Sept. 26, 2019 Reviewed by: Blue Zheng Sept. 26, 2019 Approved by: Smith Chen Sept. 26, 2019 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

Microtest M M ts H — Page 3 of 4 — Report No.: MTi19082802—2E2 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range [Electric fieldstrength. Magnetic field strength |POWe! density |averaging time (mHz) (Wm) (Amm) (mWiem) (minutes) (A) Limits for Occupational/Controlled Exposure o 330 614 1e3 *00 8 Boso teazn 4 cor ~sowr? s 20—300 614 a.163 1.0 s oo1 amo woo 8 1,200—100 500 s s (B) Limits for General Population/UncontrolledExposure o3134 614 163 ~100 E 13030 sn 2 19 en 30 so—zo0 ars o o73 02 5o soo1 50o #1500 a 1500—100 poo C Eq 1= frequency in MHz *= Plane—wave equnalent power density MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4pi*R®) Where Pd= Power density in mW/cm2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm{20cm) Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total powerinput to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Tel:(86—755)88850 135 Fax: (86—755) saet so136 Web: hitpiwww.mttest.com E—mail mti@§1mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixang, Bac‘an Distrct, Shenzhen, Guangdong, China

- Page 4 of 4 - Report No.: MTi19082802-2E2 Measurement Result WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, Power density limited: 1mW/ cm2 Antenna Type: Wifi Antenna: Metal Antenna; WIFI antenna gain: -0.03dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(-0.03/10)=0.99 Tune- Power conducted Antenn Evaluation result up Max density power a at 20cm Chann power Limits modul el Freq. tune-up power Gain ation Power (MHz) (dBm) (dBm) Numeri (mW/c (dBm) (mW) density(mW/cm2) c m2) Ant A Ant A Ant A Ant A Ant A Ant A 2412 14.06 14±1 15 31.622 0.99 0.00625 1 802.1 2437 14.38 14±1 15 31.622 0.99 0.00625 1 1b 2462 13.65 14±1 15 31.622 0.99 0.00625 1 2412 11.93 12±1 13 19.953 0.99 0.00394 1 802.1 2437 13.42 13±1 14 25.119 0.99 0.00496 1 1g 2462 10.89 11±1 12 15.849 0.99 0.00313 1 2412 802.1 12.40 12±1 13 19.953 0.99 0.00394 1 2437 1n 11.57 12±1 13 19.953 0.99 0.00394 1 2462 H20 10.82 11±1 12 15.849 0.99 0.00313 1 Conclusion: For the max result: 0.00625≤ 1.0 for 1g SAR, No SAR is required. ----END OF REPORT---- Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


Document Created: 2019-10-19 23:12:28
Document Modified: 2019-10-19 23:12:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC