RF Test Report

FCC ID: 2AAZPFAN65T

Test Report

Download: PDF
FCCID_3047591

Report No.: ATE20161124 Page 1 of 28 APPLICATION CERTIFICATION On Behalf of Carewell Electric Technology (Zhongshan) Co., Ltd. REMOTE CONTROL Model No.: FAN-65T FCC ID: 2AAZPFAN65T Prepared for : Carewell Electric Technology (Zhongshan) Co., Ltd. Address : Torch Development Zone, No.2, Ouya Road, Zhongshan, Guangdong, China Prepared by : ACCURATE TECHNOLOGY CO., LTD Address : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number : ATE20161124 Date of Test : June 8-12, 2016 Date of Report : June 16, 2016 FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 2 of 28 TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION .......................................................................................................... 4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility ......................................................................................................................5 1.3. Measurement Uncertainty.........................................................................................................................5 2. MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 6 3. SUMMARY OF TEST RESULTS................................................................................................... 7 4. THE FIELD STRENGTH OF RADIATION EMISSION ............................................................ 8 4.1. Block Diagram of Test Setup....................................................................................................................8 4.2. The Field Strength of Radiation Emission Measurement Limits..............................................................9 4.3. Configuration of EUT on Measurement ...................................................................................................9 4.4. Operating Condition of EUT ....................................................................................................................9 4.5. Test Procedure ........................................................................................................................................10 4.6. The Field Strength of Radiation Emission Measurement Results ..........................................................11 5. 20DB OCCUPIED BANDWIDTH ................................................................................................ 13 5.1. Block Diagram of Test Setup..................................................................................................................13 5.2. The Bandwidth of Emission Limit According To FCC Part 15 Section 15.231(c) ................................13 5.3. EUT Configuration on Measurement .....................................................................................................14 5.4. Operating Condition of EUT ..................................................................................................................14 5.5. Test Procedure ........................................................................................................................................14 5.6. Measurement Result ...............................................................................................................................14 6. RELEASE TIME MEASUREMENT............................................................................................ 15 6.1. Block Diagram of Test Setup..................................................................................................................15 6.2. Release Time Measurement According To FCC Part 15 Section 15.231(a) ..........................................15 6.3. EUT Configuration on Measurement .....................................................................................................16 6.4. Operating Condition of EUT ..................................................................................................................16 6.5. Test Procedure ........................................................................................................................................16 6.6. Measurement Result ...............................................................................................................................16 7. AVERAGE FACTOR MEASUREMENT .................................................................................... 17 7.1. Block Diagram of Test Setup..................................................................................................................17 7.2. Average factor Measurement according to ANSI C63.10-2013.............................................................17 7.3. EUT Configuration on Measurement .....................................................................................................18 7.4. Operating Condition of EUT ..................................................................................................................18 7.5. Test Procedure ........................................................................................................................................18 7.6. Measurement Result ...............................................................................................................................18 8. ANTENNA REQUIREMENT........................................................................................................ 19 8.1. The Requirement ....................................................................................................................................19 8.2. Antenna Construction .............................................................................................................................19 FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 3 of 28 Test Report Certification Applicant : Carewell Electric Technology (Zhongshan) Co., Ltd. Manufacturer : Carewell Electric Technology (Zhongshan) Co., Ltd. EUT Description : REMOTE CONTROL (A) MODEL NO.: FAN-65T (B) SERIAL NO.: N/A (C) POWER SUPPLY: DC 3V (Battery) Measurement Procedure Used: FCC Rules and Regulations Part 15 Subpart C Section 15.231a ANSI C63.10-2013 The device described above is tested by ACCURATE TECHNOLOGY CO., LTD to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart C Section 15.231a. The measurement results are contained in this test report and ACCURATE TECHNOLOGY CO., LTD is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the Equipment Under Test (EUT) is to be technically compliant with the FCC requirements. This report applies to above tested sample only. This report shall not be reproduced in part without written approval of ACCURATE TECHNOLOGY CO., LTD. Date of Test : June 8-12, 2016 Date of Report : June 16, 2016 Prepared by : (Bob Wang, Engineer) Approved & Authorized Signer : ( Sean Liu, Manager) FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 4 of 28 1. GENERAL INFORMATION 1.1.Description of Device (EUT) EUT : REMOTE CONTROL Model Number : FAN-65T Power Supply : DC 3V (powered by battery) Modulation: : ASK Operation Frequency : 315MHz Applicant : Carewell Electric Technology (Zhongshan) Co., Ltd. Address : Torch Development Zone, No.2, Ouya Road, Zhongshan, Guangdong, China Manufacturer : Carewell Electric Technology (Zhongshan) Co., Ltd. Address : Torch Development Zone, No.2, Ouya Road, Zhongshan, Guangdong, China Date of sample : June 7, 2016 received Date of Test : June 8-12, 2016 FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 5 of 28 1.2.Description of Test Facility EMC Lab : Accredited by TUV Rheinland Shenzhen Listed by FCC The Registration Number is 752051 Listed by Industry Canada The Registration Number is 5077A-2 Accredited by China National Accreditation Committee for Laboratories The Certificate Registration Number is L3193 Name of Firm : ACCURATE TECHNOLOGY CO., LTD Site Location : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China 1.3.Measurement Uncertainty Conducted Emission Expanded Uncertainty = 2.23dB, k=2 Radiated emission expanded uncertainty = 3.08dB, k=2 (9kHz-30MHz) Radiated emission expanded uncertainty = 4.42dB, k=2 (30MHz-1000MHz) Radiated emission expanded uncertainty = 4.06dB, k=2 (Above 1GHz) FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 6 of 28 2. MEASURING DEVICE AND TEST EQUIPMENT Table 1: List of Test and Measurement Equipment Kind of equipment Manufacturer Type S/N Calibrated dates Cal. Interval EMI Test Receiver Rohde&Schwarz ESCS30 100307 Jan. 09, 2016 One Year EMI Test Receiver Rohde&Schwarz ESPI3 101526/003 Jan. 09, 2016 One Year Spectrum Analyzer Agilent E7405A MY45115511 Jan. 09, 2016 One Year Pre-Amplifier Rohde&Schwarz CBLU118354 3791 Jan. 09, 2016 One Year 0-01 Loop Antenna Schwarzbeck FMZB1516 1516131 Jan. 14, 2016 One Year Bilog Antenna Schwarzbeck VULB9163 9163-323 Jan. 14, 2016 One Year Horn Antenna Schwarzbeck BBHA9120D 9120D-655 Jan. 14, 2016 One Year Horn Antenna Schwarzbeck BBHA9120D 9120D-1067 Jan. 14, 2016 One Year LISN Rohde&Schwarz ESH3-Z5 100305 Jan. 09, 2016 One Year LISN Schwarzbeck NSLK8126 8126431 Jan. 09, 2016 One Year Highpass Filter Wainwright WHKX3.6/18 N/A Jan. 09, 2016 One Year Instruments G-10SS Band Reject Filter Wainwright WRCG2400/2 N/A Jan. 09, 2016 One Year Instruments 485-2375/2510 -60/11SS FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 7 of 28 3. SUMMARY OF TEST RESULTS FCC Rules Description of Test Result Section 15.207 Conducted Emission N/A Section 15.231(b) Radiated Emission Compliant Section 15.231(c) 20dB Bandwidth Compliant Section 15.231(a)(1) Release Time Compliant Measurement Section 15.203 Antenna Requirement Compliant The product is a manually operated transmitter. Section 15.231 (a) (2), (3), (4) and (5) are not applicable. All normal using modes of the normal function were tested but only the worst test data of the worst mode is recorded by this report. Note: The power supply mode of the EUT is DC 3V, According to the FCC standard requirements, conducted emission is not applicable FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 8 of 28 4. THE FIELD STRENGTH OF RADIATION EMISSION 4.1.Block Diagram of Test Setup 4.1.1.Block diagram of connection between the EUT and simulators EUT (EUT: REMOTE CONTROL) 4.1.2.Semi-Anechoic Chamber Test Setup Diagram ANTENNA ELEVATION VARIES FROM 1 TO 4 METERS 3 METERS EUT Cable 0.8 METER GROUND PLANE (EUT: REMOTE CONTROL) FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 9 of 28 4.2.The Field Strength of Radiation Emission Measurement Limits 4.2.1. Radiation Emission Measurement Limits According to FCC Part 15 Section 15.231(b) Frequency Range of Field Strength of Field Strength of Fundamental Emission Spurious Emission Fundamental [Average] [Average] [MHz] [V/m] [V/m] 40.66-40.70 2250 225 70-130 1250 125 130-174 1250-3750 125-375 174-260 3750 375 260-470 3750-12500 375-1250 Above 470 12500 1250 Where F is the frequency in MHz, the formulas for calculating the maximum permitted fundamental field strengths are as follows: for the band 130-174 MHz, uV/m at 3 meters = 56.81818(F) - 6136.3636; for the band 260-470 MHz, uV/m at 3 meters = 41.6667(F) - 7083.3333. The maximum permitted unwanted emission level is 20 dB below the maximum permitted fundamental level. 4.2.2. Restricted Band Radiation Emission Measurement Limits According to FCC part 15 Section 15.205 and Section15.209. 4.3.Configuration of EUT on Measurement The following equipment is installed on Radiated Emission Measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 4.3.1. REMOTE CONTROL (EUT) Model Number : FAN-65T Serial Number : N/A Manufacturer : Carewell Electric Technology (Zhongshan) Co., Ltd. 4.4.Operating Condition of EUT 4.4.1.Setup the EUT and simulator as shown as Section 4.1. 4.4.2.Turn on the power of all equipment. 4.4.3. Let the EUT work in TX mode measure it. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 10 of 28 4.5.Test Procedure The EUT and its simulators are placed on a turntable, which is 0.8 meter high above ground(Below 1GHz). The EUT and its simulators are placed on a turntable, which is 1.5 meter high above ground(Above 1GHz). The turntable can rotate 360 degrees to determine the position of the maximum emission level. EUT is set 3.0 meters away from the receiving antenna, which is mounted on an antenna tower. The antenna can be moved up and down between 1.0 meter and 4 meters to find out the maximum emission level. Broadband antenna (calibrated bi-log antenna) is used as receiving antenna. Both horizontal and vertical polarizations of the antenna are set on measurement. In order to find the maximum emission levels, all of the EUT location must be manipulated according to ANSI C63.10:2013 on radiated emission measurement. The EUT was tested in 3 orthogonal planes. The bandwidth of test receiver is set at 120 kHz in 30-1000 MHz, and 1 MHz in 1000-4000 MHz. The frequency range from 30 MHz to 4000 MHz is checked. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 11 of 28 4.6.The Field Strength of Radiation Emission Measurement Results PASS. The frequency range 30MHz to 4000MHz is investigated. EUT: REMOTE CONTROL Model No.: FAN-65T Power Supply: DC 3V Test Mode: TX Test Engineer: Star Frequency Reading Factor Average Result(dBV/m) Limit(dBV/m) Margin(dB) Polarization (MHz) (dBV/m) Corr. Factor PEAK (dB) (dB) AV PEAK AV PEAK AV PEAK 315 92.40 -15.91 -5.07 71.42 76.49 75.62 95.62 -4.20 -19.13 630 65.18 -9.38 -5.07 50.73 55.80 55.62 75.62 -4.89 -19.82 945 54.59 -3.60 -5.07 45.92 50.99 55.62 75.62 -9.70 -24.63 Horizontal 1260 66.40 -11.08 -5.07 50.25 55.32 55.62 75.62 -5.37 -20.30 1575 65.42 -10.36 -5.07 49.99 55.06 55.62 75.62 -5.63 -20.56 1890 60.71 -9.21 -5.07 46.43 51.50 55.62 75.62 -9.19 -24.12 315 85.79 -15.91 -5.07 64.81 69.88 75.62 95.62 -10.81 -25.74 630 62.85 -9.38 -5.07 48.40 53.47 55.62 75.62 -7.22 -22.15 945 51.29 -3.60 -5.07 42.62 47.69 55.62 75.62 -13.00 -27.93 Vertical 1260 68.28 -11.08 -5.07 52.13 57.20 55.62 75.62 -3.49 -18.42 1575 65.52 -10.36 -5.07 50.09 55.16 55.62 75.62 -5.53 -20.46 1890 64.05 -9.21 -5.07 49.77 54.84 55.62 75.62 -5.85 -20.78 Note: 1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss, and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is as follows: Result = Reading + Corrected Factor Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss – Amplifier Gain 3. FCC Limit for Average Measurement = 41.6667(315)-7083.3333 = 6041.6772 V/m =75.62 V/m 4. The spectral diagrams in appendix I display the measurement of peak values. 5. Average value= PK value + Average Factor (duty factor) 6. If the peak-detected amplitude can be shown to comply with the average limit, then it is not necessary to perform a separate average measurement. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 12 of 28 7. The EUT is tested radiation emission in three axes(X,Y,Z). The worst emissions are reported in three axes. 8. Pulse Desensitization Correction Factor Pulse Width (PW) = 0.44ms 2/PW = 2/0.44ms = 4.5455 kHz RBW (100 kHz) > 2/PW (4.5455 kHz) Therefore PDCF is not needed FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 13 of 28 5. 20DB OCCUPIED BANDWIDTH 5.1.Block Diagram of Test Setup 5.1.1.Block diagram of connection between the EUT and simulators EUT (EUT: REMOTE CONTROL) 5.1.2.Semi-Anechoic Chamber Test Setup Diagram ANTENNA ELEVATION VARIES FROM 1 TO 4 METERS 3 METERS EUT Cable 0.8 METER GROUND PLANE (EUT: REMOTE CONTROL) 5.2.The Bandwidth of Emission Limit According To FCC Part 15 Section 15.231(c) The bandwidth of emission shall be no wider than 0.25% of the center frequency. Therefore, the bandwidth of the emission limit is 315 MHz×0.25% = 787.5 kHz. Bandwidth is determined at the two points 20 dB down from the top of modulated carrier. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 14 of 28 5.3.EUT Configuration on Measurement The following equipment are installed on the bandwidth of emission Measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 5.3.1.REMOTE CONTROL (EUT) Model Number : FAN-65T Serial Number : N/A Manufacturer : Carewell Electric Technology (Zhongshan) Co., Ltd. 5.4.Operating Condition of EUT 5.4.1.Setup the EUT and simulator as shown as Section 5.1. 5.4.2.Turn on the power of all equipment. 5.4.3.Let the EUT work in TX mode measure it. 5.5.Test Procedure 5.5.1. Set SPA Center Frequency = Fundamental frequency, RBW = 10 kHz, VBW = 30 kHz, Span = 1MHz. 5.5.2.Set SPA Max hold, Mark peak, -20 dB. 5.6.Measurement Result The EUT does meet the FCC requirement. -20 dB bandwidth =56 kHz <787.5 kHz. The spectral diagrams in appendix I. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 15 of 28 6. RELEASE TIME MEASUREMENT 6.1.Block Diagram of Test Setup 6.1.1.Block diagram of connection between the EUT and simulators EUT (EUT: REMOTE CONTROL) 6.1.2.Semi-Anechoic Chamber Test Setup Diagram ANTENNA ELEVATION VARIES FROM 1 TO 4 METERS 3 METERS EUT Cable 0.8 METER GROUND PLANE (EUT: REMOTE CONTROL) 6.2.Release Time Measurement According To FCC Part 15 Section 15.231(a) Section 15.231(a) (1) A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 16 of 28 6.3.EUT Configuration on Measurement The following equipment are installed on Release Time Measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 6.3.1. REMOTE CONTROL (EUT) Model Number : FAN-65T Serial Number : N/A Manufacturer : Carewell Electric Technology (Zhongshan) Co., Ltd. 6.4.Operating Condition of EUT 6.4.1.Setup the EUT and simulator as shown as Section 6.1. 6.4.2.Turn on the power of all equipment. 6.4.3.Let the EUT work in TX mode measure it. 6.5.Test Procedure 6.5.1. Set SPA Center Frequency = Fundamental frequency, RBW = 100 kHz, VBW = 300 kHz, Span = 0 Hz. Sweep time = 10 s. 6.5.2.Set EUT as normal operation and press Transmitter button. 6.5.3.Set SPA View. Delta Mark time. 6.6. Measurement Result The release time less than 5 seconds. Release Time = 2.83584s The spectral diagrams in appendix I. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 17 of 28 7. AVERAGE FACTOR MEASUREMENT 7.1.Block Diagram of Test Setup 7.1.1.Block diagram of connection between the EUT and simulators EUT (EUT: REMOTE CONTROL) 7.1.2.Semi-Anechoic Chamber Test Setup Diagram ANTENNA ELEVATION VARIES FROM 1 TO 4 METERS 3 METERS EUT Cable 0.8 METER GROUND PLANE 7.2.Average factor Measurement according to ANSI C63.10-2013 ANSI C63.10-2013 Section 7.5 Unless otherwise specified, when the radiated emission limits are expressed in terms of the average value of the emission, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 s (100 ms). In cases where the pulse train exceeds 0.1 s, the measured field strength shall be determined during a 0.1 s interval.64 The following procedure is an example of how the average value may be determined. The average field strength may be found by measuring the peak pulse amplitude (in log equivalent units) and determining the duty cycle correction factor (in dB) associated with the pulse modulation as shown in Equation (10): Average factor in dB = 20 log (duty cycle) FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 18 of 28 7.3.EUT Configuration on Measurement The following equipment are installed on average factor Measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 7.3.1. REMOTE CONTROL Model Number : FAN-65T Serial Number : N/A Manufacturer : Carewell Electric Technology (Zhongshan) Co., Ltd. 7.4.Operating Condition of EUT 7.4.1.Setup the EUT and simulator as shown as Section 7.1. 7.4.2.Turn on the power of all equipment. 7.4.3.Let the EUT work in TX mode measure it. 7.5.Test Procedure 7.5.1.The time period over which the duty cycle is measured is 100 milliseconds, or the repetition cycle, whichever is a shorter time frame. The worst case (highest percentage on) duty cycle is used for the calculation. 7.5.2.Set SPA Center Frequency = Fundamental frequency, RBW = 100 kHz, VBW = 300 kHz, Span = 0 Hz. 7.5.3.Set EUT as normal operation. 7.5.4.Set SPA View. Delta Mark time. 7.6. Measurement Result The duty cycle is simply the on time divided by the period: The duration of one cycle = 35.0ms Effective period of the cycle = (0.44×13) + (0.92×15)ms =19.52 ms DC =19.52ms/35.0ms=0.558 Therefore, the average factor is found by 20log0.558= -5.07dB The spectral diagrams in appendix I. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 19 of 28 8. ANTENNA REQUIREMENT 8.1.The Requirement According to Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. 8.2.Antenna Construction Device is equipped with permanent attached antenna, which isn’t displaced by other antenna. The Antenna gain of EUT is 0dBi. Therefore, the equipment complies with the antenna requirement of Section 15.203. Antenna FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 20 of 28 APPENDIX I (Test Curves) FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

(u.w ACCURATE TECHNOLOGY CO., LTD. Site: 1# Chamber F1,Bidg,A,Changyuan New Material Port Keyuan Rd, Tel:+86—0755—26503290 Science & Industry Park,Nanshan Shenzhen,P.R.China Fax:+86—0755—26503396 Job No.: STAR2016 #1085 Polarization: Horizontal Standard: FCC Class B 3M Radiated Power Source: DC 3V Test item: Radiation Test Date: 16/06/127 Temp.(_C)/Hum.(%) 25 C/55% Time: 8/56/21 EUT: REMOTE CONTROL Engineer Signature: star Mode: TX Distance: 3m Model: FAN—65T Manufacturer: Carewell Note: Report No.:ATE20161124 100.0 dBu¥/m limit1: — 90 70 60 50 40 30 20 10 84 . : | ; ; 30.000 40 50 60 70 80 300 400 500 600 700 1000.0 MHz Freq. Reading Factor Result Limit |Margin| Height Degre® pouuyy No: (MHz) (dBuV/im) (dB) (dBuV/im) (dBuvim)| (4By °4C (em) tea) R&m*" 1 315.0000| 9240 —15.91 76.49 9562 |—19.13) peak 3 630.0000| 65.18 —9.38 55.80 7562 19.82 peak 3 945.0000| 54.59 —3.60 50.99 7562 —24.63 peak

(u.w d ACCURATE TECHNOLOGY CO., LTD. Site: 1# Chamber F1,Bidg,A,Changyuan New Material Port Keyuan Rd, Tel:+86—0755—26503290 Science & Industry Park,Nanshan Shenzhen,P.R.China Fax:+86—0755—26503396 Job No.: STAR2016 #1084 Polarization: Vertical Standard: FCC Class B 3M Radial ted Power Source: DC 3V Test item: Radiation Test Date: 16/06/12/ Temp.( C)Hum.(%) 25 C/55 % Time: 8/53/30 EUT: REMOTE CONTROL Engineer Signature: star Mode: TX Distance: 3m Model: FAN—65T Manufacturer: Carewell Note: Report No.:ATE20161124 100.0 dBu¥/m fimit1: 70 40 30 10 30.000 40 50 60 70 300 400 500 600 700 1000.0 MHz No: fibe) deavimg de)_| abuvim| cabuum Nag)"| Oetecer] Ned‘ SS remee 1 315.0000| 8579 —15.91 69.88 9562 |—25.74| peak 2 e30.0000| 6285 —ase 5347 7562 2219 peak 3 e4s0000| S129 350 4769 7562 27.93 peak

(u.w ACCURATE TECHNOLOGY CO., LTD. Site: 1# Chamber F1,Bidg,A.Changyuan New Material Port Keyuan Rd, Tel:+86—0755—26503290 Science & Industry Park,Nanshan Shenzhen,P.R.China Fax: +86—0755—26503396 Job No.: star2016 #1086 Polarization: Vertical Standard: FCC Class B 3M Radiated Power Source: DC 3V Test item: Radiation Test Date: 16/06/127 Temp.( C)Hum.(%) 25 C/55% Time: 9/02/42 EUT: REMOTE CONTROL Engineer Signature: star Mode: TX Distance: 3m Model: FAN—GS5T Manufacturer: Carewell Note: Report No.:ATE20161124 80.0 dBu¥/m limit1: 70 50 40 30 20 10 0.0 i 1000.000 3000 4000.0 MHz Ne dire) @éavig (de)_) (dbavim) aguuiim| Ns"| Deecter N) ET Rever 7 1260.000| ba28 —11.08 5720 7562 1842 peak 2 1575.000| 6582 1036 5516 7562 2040 peak 3 1890.000| 6405 o2 5484 7562 2078 peak

(u.w o ACCURATE TECHNOLOGY CO., LTD. Site: 1# Chamber F1,Bidg.A,Changyuan New Material Port Keyuan Rd, Tel:+86—0755—26503290 Science & Industry Park, Nanshan Shenzhen,P.R.China Fax:+86—0755—26503396 Job No.: star2016 #1087 Polarization: Horizontal Standard: FCC Class B 3M Radiated Power Source: DC 3V Test item: Radiation Test Date: 16/06/12/ Temp.{(_ C)Hum.(%) 25 C/55% Time: 9/06/51 EUT: REMOTE CONTROL Engineer Signature: star Mode: TX Distance: 3m Model: FAN—65T Manufacturer: Carewell Note: Report No.:ATE20161124 80.0 dBu¥/m limit1: 70 40 30 20 10 0.0 ‘ 1000.000 3000 4000.0 MHz ho. (ifii) (5533)?% F(gg;)s (dFéfi/u/:w) (dlém/tm) “13%” Detactor HERT® CESSP Remark 1 1260.000| 6640 —11.08 5532 7562 —20.30 peak 7 1575.000| 6542 1036 55.06 7562 —20.50 peak 3 1890.000| 60.71 821 5150 7562 —24.12) peak

Report No.: ATE20161124 Page 25 of 28 * RBW 10 kHz Marker 1 [T1 ] VBW 30 kHz -2.15 dBm Ref 10 dBm Att 40 dB SWT 10 ms 315.102000000 MHz 10 ndB [T1] 20.00 dB BW 56.000000000 kHz 1 Temp 1 [T1 ndB] A 0 -22.39 dBm 1 PK 315.072000000 MHz MAXH -10 Temp 2 [T1 ndB] -22.76 dBm 315.128000000 MHz -20 T1 T2 -30 -40 -50 -60 -70 -80 -90 Center 315.1 MHz 100 kHz/ Span 1 MHz Date: 8.JUN.2016 18:15:01 FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 26 of 28 RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz -54.73 dBm Ref 10 dBm Att 40 dB SWT 10 s 3.804160 s 10 Delta 2 [T1 ] 0.53 dB 2.835840 s A 0 SGL 1 PK MAXH -10 -20 -30 -40 -50 1 2 -60 -70 -80 -90 Center 315.1 MHz 1 s/ Date: 8.JUN.2016 18:40:21 Release Time = 2.83584s FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 27 of 28 The graph shows the pattern of coding during the signal transmission. The duration of one cycle = 35.0 ms. RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz -59.31 dBm Ref 10 dBm Att 40 dB SWT 100 ms 20.200000 ms 10 Delta 2 [T1 ] -0.68 dB 26.600000 ms A 0 Delta 3 [T1 ] SGL 1 PK 0.01 dB MAXH -10 35.000000 ms -20 -30 -40 -50 1 2 3 -60 -70 -80 -90 Center 315.1 MHz 10 ms/ Date: 8.JUN.2016 18:20:41 FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD

Report No.: ATE20161124 Page 28 of 28 RBW 100 kHz Delta 2 [T1 ] VBW 300 kHz 0.04 dB Ref 10 dBm Att 40 dB SWT 10 ms 440.000000 µs 10 Marker 1 [T1 ] -62.58 dBm 4.160000 ms A 0 SGL 1 PK MAXH -10 -20 -30 -40 -50 -60 1 2 -70 -80 -90 Center 315.1 MHz 1 ms/ Date: 8.JUN.2016 18:38:04 The graph shows the duration of ‘on’ signal. From marker 1 to marker 2, duration is 0.44ms. RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz -65.08 dBm Ref 10 dBm Att 40 dB SWT 10 ms 4.760000 ms 10 Delta 2 [T1 ] 1.18 dB 920.000000 µs A 0 SGL 1 PK MAXH -10 -20 -30 -40 -50 -60 2 1 -70 -80 -90 Center 315.1 MHz 1 ms/ Date: 8.JUN.2016 18:37:39 The graph shows the duration of ‘on’ signal. From marker 1 to marker 2, duration is 0.92ms. FCC ID: 2AAZPFAN65T ACCURATE TECHNOLOGY CO., LTD


Document Created: 2017-12-09 09:42:32
Document Modified: 2017-12-09 09:42:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC