Cover Letters

FCC ID: 2AAXVTNTMOD1

Cover Letter(s)

Download: PDF
FCCID_2683441

ABG Tag and Traq LLC 2300 Joe Ramsey Boulevard Greenville, TX 75401 3/26/2015 Re: Limited Modular Approval Request — FCC 2AAXVTNTMODI 2AANVTNTMODI - Product Name: MODIUWB Pursuant to the requirements of DAOO—1407 and 996369 "D01 Module Equip Auth Guide v01" for limited modular approval of Part 15 devices: s smimanreguirement.uomizt) m "I~ * comments/Declaration i. The radio elements must have the radio All radio frequencyelements are located within the IC Chip frequency circuitry shielded. Physical/discrete on the Module. and tuningcapacitors may be located external to the shield, but must be on the module assembly. i. The module must have buffered The only data input to the module is a digital SPI Bus modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. . The module must contain power supply 2.8 to3.6 volt input, internally regulated to 1.8% regulation on the module. iv. The module must contain a permanently Permanently attachedantenna attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). v. The module must demonstrate compliance in No a stand—alone configuration vi. The module must be labeled with its Yer permanently affixed FCC ID label, or use an electronic display vil. The module must comply with all specific rules XX ABG Tag and Traq, Inc. does not sell this module. ABG Tag applicable to the transmitter. The grantee and Traq, Inc. integrates this module into their own devices and must provide comprehensive instructions to | are responsible for labeling of the module and final assemblies explain compliance requirements. | and for the compliance ofthe final assemblies and for the compliance of the final assemblywithCFR 457,15.247.

vHi The module must comply with RF p’he imodule will be used by ABG Tag and Traq,. Inc. for final assemblies used only in Mobile RF exposure configurations. This filing contains evidence of compliance with RF exposure requirements. exposure niles for mobile configquration. Dated this 26 Day of March 20 2015 By: James K Burgess III Title: Owner On behaif of: _ABG Tagand Trag, Inc Telephone: 405—848—0081


Document Created: 2015-07-13 12:22:23
Document Modified: 2015-07-13 12:22:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC