MPE

FCC ID: 2AATVG801

RF Exposure Info

Download: PDF
FCCID_2058926

FCC ID: 2AATVG801 RF EXPOSURE REPORT 1. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 2. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. 3.POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by:

FCC ID: 2AATVG801 RF EXPOSURE REPORT D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 3. RF EXPOSURE RESULTS MAX OUTPUT table(s): 17.59 In the POWER below,dBm Power and Gain are entered in units of dBm and dBi The directional gain : 8dBi Distance respectively :20cm and conversions to linear forms are used for the calculations. 362mW/4X3.14X400= 0.072<1mW/cm^2 Band Mode Chain Separatio Output Antenna Duty EIRP Power Limit for Distance Power Gain Cycle Density (mW/cm^ (mW/c MIMO (cm) (dBm) (dBi) (%) (mW) 2) m^2) 2.4 GHz WLAN 0 14.90 8 100 195.0 2.4 GHz WLAN 1 14.23 8 100 167.1 Combined 20 362.1 0.101 1 Result: Pass


Document Created: 2013-08-30 15:10:39
Document Modified: 2013-08-30 15:10:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC