User Manual REV1

FCC ID: 2AATL-F11AUUM13

Users Manual

Download: PDF
FCCID_2566572

FN-LINK TECHNOLOGY LIMITED F11AUUM13 series user 's manual http://www.fn-link.com Page 1 /9

FN-LINK TECHNOLOGY LIMITED Index How to install the driver Put the product plug into the USB port of PC……………………..3 Copy the driver into the PC……………..………….…...................3 Install the driver & Install driver successfully……….………….....6 The test interface……………………………….……......................7 http://www.fn-link.com Page 2 /9

FN-LINK TECHNOLOGY LIMITED 1. Put the product plug into the USB port, the "device manager" of PC is shown below: 2. Copy the corresponding driver "RTLWlanU_WindowsDriver_1019.0.0518.2012_ UI_1.00.0191_EU" into the PC, and install driver, the installation methods: open the file "RTLWlanU_WindowsDriver_1019.0.0518.2012_UI_1.00.0191_EU", double click "Setup" installation program, guide to install. http://www.fn-link.com Page 3 /9

<nn—Lfini«" Innovation For Surfing i [ L + RTWlanU_WindowsDriver_1019.0.0518.2012_UI_1.00.019... > #sn~— BHF —#&~ wFsexitz ces¥ I m — sxBER xm +) | 4 TE J DATA 2013/12/25 1543 itz & 25 J EAP 2013/12/25 1543 itz ) snob(GE «J IM 2013/12/25 1543 it Jt RTWLANU_Driver 2013/12/25 1543 wi{tz>z c &) _Setup.dll 2008,/5/1013:27 mHBEFHE 326 KB Y datal 2012/5/23 1546 WinRAR Ex+ 8,396 KB ' id w5 _ datal.hdr 2012/5/23 15:46 HDR x{4 67 KB |_ aer Y data? 2012/5/23 1546 WinRAR F@&wi+t 18,797 KB E{j X+= Install 2012/5/21 16;:25 Windows HANMS... 1 KB a) 27— i#| IsConfig 2013/12/25 1547 @REi#s 18 KB i| ISLangUni 2012/5/2116:25 Ki#E 55 KB 8 tEtl ) ISSetup.dll 2008/9/1118:26 mHBEEFFE 543 KB £5, BBE (C:) mmlayOLt Di BIn 34 C #hNE (D:) c #hre (E:) m relup <—~ s 4| Setup 2012/5/21 1625 is 1 KB C mz __] setup.inx 2012/5/23 1545 INX + 354 KB |__] setup.iss 2012/5/21 16:25 ISS x+ 1 KB Uninstall 2012/5/2116:25 Windows HKME... 1 KB _] Uninstall.iss 2012/5/2116:250 ISS x{+ 1 KB V Setup mBEB: 2012/5/21 16:25 EREB: 2013/12/25 15:43 in LAHttE> *) 390 KB

<nn—Lfini«" Innovation For Surfing Headv Y¥ to Install the Procq. am he umzad is ready to began installabon Chck Install to begn the nstalation II you want to remew o change ary ol your nstallasbon setungs, clck Back. Chck Cancel to exit the mmzard Install s«( File Et hew Fawortes Tookk Help 'l Back * P /) l,"" Search Folders l |;;t}* **} . o w f M ' C l Mc 6. § A . A .AAA LNE NA l p “ | 1 J‘a' M — wmme 3OTTWATE rzrfl'-”!-!n'lu zu> | File Folder 8§16/2014 9:26 AM File Folder 8§16]f2014 9:26 AM File Folder 8§16/2014 9:26 AM File Folder 8§16/2014 9:26 AM File Folder 8J16/2014 9:26 AM File Folder 8f16}2014 9:26 AM File Folder 8{16]/2014 9:26 AM Application Extenson S5¢/10/2008 1:27 PM Cabimnet File 11f15f2013 12:24 PM HOR File 11f195/2013 12:24 PM Cabnet File 11{15]}2013 12:24 PM Configuwation Settings 10]/7}2013 11:17 AM Applcation Extenson 11{15]f2013 12:24 PM BIN File 11f15]/2013 12:24 PM Applicatior 11{14]}2013 11:48 AM ____] Configuration Settings 11/15]/2013 12:24 PM B —INX File 11/15/2013 12:24 PM ISN File 5/10f2008 1:07 PM ~ —~G&— — og —

<nn—Lfini«" Innovation For Surfing ',dSSWUld Ente: the password reqaaed to un tes setup. Please note that passwords ae case senmtirve Clhck Next to conbruse "InstallSi‘ad <Bock_(ne__))]corce InstallS5 imeld Wizard Complete The InstalStwueld Wizad has successiuly ntaled REALTEK WLAN NIC Massproducton Kst Cick Frush to ext the wnzaed Installsi‘c‘d

FN-LINK TECHNOLOGY LIMITED 3. After install driver successfully. the "device manager" of PC is shown below: 4. After install driver successfully. double click the icon " " in PC desktop, as shown below: http://www.fn-link.com Page 7 /9

FN-LINK TECHNOLOGY LIMITED FCC Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. http://www.fn-link.com Page 8 /9

F11AUUM13-W2 FN-LINK TECHNOLOGY LIMITED IC Notice: This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference. and (2) this device must accept any interference. Including interference that may cause undesired operation of the device. CAN ICES-3 (B) Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorisée aux deux conditions suivantes: 1) I'appareil ne doit pas produire de brouillage, et 2) I'utillsateur de I'appareil doit accepterbrouillage radioélectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil. NMB-3 (B) FCC Radiation Exposure Statement: This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to missing shielding the module is strictly limited to integration by the Grantee himself or his dedicated OEM integrator under control of the Grantee.However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. This device is intended only for OEM integrators under the following conditions: 1)This module is granted as a Limited Modular Approval. 2)This device has been designed to operate with a integral antenna having a maximum gain of 0dBi.Only this type of antenna may be used. This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure conditions (antennas are greater than 20cm from a person’s body)when installed in certain specific OEM configurations. The host system shall have a label showing: Contains FCC ID:2AATL-F11AUUM13 The wifi module is designed to comply with the FCC statement. FCC ID is 2AATL-F11AUUM13. The host system using wifi module F11AUUM13-W3, F11AUUM13-W2, should have label indicated FCC ID 2AATL-F11AUUM13. Note: The wifi module has no shielding and tested stand alone. This module is tested and approved as Limited modular approval with stand alone configuration, any OEM incorporated this radio module into any system may require additional testing and evaluation. This module is not sales with antenna, it requires the OEM to complete the antenna. And the kind of antenna that users can be use: FPC antenna, PCB antenna, integral antenna. (The gain of antenna : -2 to 0dBi) 9 USB WIFI 8 Pin 2 Module 7 6 Antenna 3 5 4 1 (Kind of antenna: FPC antenna, PCB antenna, Integral antenna) http://www.fn-link.com Page 9 /9


Document Created: 2015-03-09 15:03:35
Document Modified: 2015-03-09 15:03:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC