Test report

FCC ID: 2AASZ-T7026

Test Report

Download: PDF
FCCID_2050464

Global United Technology Services Co., Ltd. Report No.: GTSE13080127102 TEST REPORT Applicant: Shenzhen Iproda Technology Co.,Ltd Address of Applicant: 4F-5F, C building, GongMing Tangwei Village WanFeng Industrial Zone, Shenzhen, China Equipment Under Test (EUT) Product Name: TABLET PC Model No.: T7026, T7026C, GSSMID-7002S, MIDMA-7002S, T7011, T7049, T7049B, T7022GMS, T7024 FCC ID: 2AASZ-T7026 Applicable standards: FCC CFR Title 47 Part 15 Subpart B:2012 Date of sample receipt: July 22, 2013 Date of Test: July 22-31, 2013 Date of report issue: August 08, 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

Report No.: GTSE13080127102 2 Version Version No. Date Description 00 August 08, 2013 Original Prepared By: Date: August 08, 2013 Project Engineer Check By: Date: August 08, 2013 Reviewer Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 18

Report No.: GTSE13080127102 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION...................................................................................................................... 5 5.1 CLIENT INFORMATION.......................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3 TEST MODE ....................................................................................................................................... 5 5.4 TEST FACILITY .................................................................................................................................... 6 5.5 TEST LOCATION .................................................................................................................................. 6 5.6 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 5.7 DEVIATION FROM STANDARDS ............................................................................................................. 6 5.8 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 6 5.9 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 TEST RESULTS AND MEASUREMENT DATA...................................................................................... 8 7.1 CONDUCTED EMISSIONS ..................................................................................................................... 8 7.2 RADIATED EMISSION ......................................................................................................................... 11 8 TEST SETUP PHOTO ............................................................................................................................ 17 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 18 Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 18

Report No.: GTSE13080127102 4 Test Summary Test Item Section in CFR 47 Result Conducted Emission Part15.107 PASS Radiated Emissions Part15.109 PASS PASS: The EUT complies with the essential requirements in the standard. Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 18

Report No.: GTSE13080127102 5 General Information 5.1 Client Information Applicant: Shenzhen Iproda Technology Co.,Ltd Address of Applicant: 4F-5F, C building, GongMing Tangwei Village WanFeng Industrial Zone, Shenzhen, China Manufacturer/Factory: Shenzhen Iproda Technology Co.,Ltd Address of Manufacturer/ 4F-5F, C building, GongMing Tangwei Village WanFeng Industrial Factory: Zone, Shenzhen, China 5.2 General Description of EUT Product Name: TABLET PC Model No.: T7026, T7026C, GSSMID-7002S, MIDMA-7002S, T7011, T7049, T7049B, T7022GMS, T7024 Test model No.: T7026 Remark: All models are identical in the same PCB layout, interior structure and electrical circuits. The only difference is the model name for commercial purpose. Power supply: Adapter: Model No.: YHXH-SW0502000U Input: AC 100-240V 50/60Hz 0.6A MAX Output: DC 5.0V 2.0A 5.3 Test mode Test mode: SD Card Video Playing mode Keep the EUT in video Playing mode PC mode Keep the EUT in exchanging data mode. Video Record mode Keep the EUT in video recording mode. Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 18

Report No.: GTSE13080127102 5.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: ● CNAS —Registration No.: CNAS L5775 CNAS has accredited Global United Technology Services Co., Ltd. To ISO/IEC 17025 General Requirements for the competence of testing and calibration laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. ● FCC —Registration No.: 600491 Global United Technology Services Co., Ltd., Shenzhen EMC Laboratory has been registered and fuly described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in files. Registration 600491, June 28, 2013. ● Industry Canada (IC) —Registration No.: 9079A-2 The 3m Semi-anechoic chamber of Global United Technology Services Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 9079A-2, June 26, 2013. 5.5 Test Location All tests were performed at: Global United Technology Services Co., Ltd. Address: 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China Tel: 0755-27798480 Fax: 0755-27798960 5.6 Description of Support Units Manufacturer Description Model Serial Number FCC ID/DoC HP Printer CB495A 05257893 DoC Lenovo PC Host M6900 EA05257893 DoC DELL MONITOR E178FPC N/A DoC DELL KEYBOARD SK-8115 N/A DoC DELL MOUSE MOC5UO N/A DoC 5.7 Deviation from Standards Biconical, log.per. antenna and horn antenna were used instead of dipole antenna. Semi-anechoic Chamber was used as alternation of open air test sites, and all test suites were performed with radiated method in it. 5.8 Abnormalities from Standard Conditions None. 5.9 Other Information Requested by the Customer None. Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 6 of 18

Report No.: GTSE13080127102 6 Test Instruments list Radiated Emission: Inventory Cal.Date Cal.Due date Item Test Equipment Manufacturer Model No. No. (mm-dd-yy) (mm-dd-yy) 3m Semi- Anechoic 1 ZhongYu Electron 9.0(L)*6.0(W)* 6.0(H) GTS250 Mar. 29 2013 Mar. 28 2014 Chamber 2 Control Room ZhongYu Electron 6.2(L)*2.5(W)* 2.4(H) GTS251 N/A N/A 3 ESU EMI Test Receiver R&S ESU26 GTS203 Jun. 29 2013 Jun. 29 2014 4 BiConiLog Antenna SCHWARZBECK VULB9163 GTS214 Jun. 29 2013 Jun. 29 2014 Double -ridged waveguide 5 SCHWARZBECK 9120D GTS208 Jun. 29 2013 Jun. 29 2014 horn 6 RF Amplifier HP 8347A GTS204 Jun. 29 2013 Jun. 29 2014 7 Preamplifier HP 8349B GTS206 Jun. 29 2013 Jun. 29 2014 8 EMI Test Software AUDIX E3 N/A N/A N/A 9 Coaxial cable GTS N/A GTS210 Jul. 07 2013 Jul. 06 2014 10 Coaxial Cable GTS N/A GTS211 Jul. 07 2013 Jul. 06 2014 11 Thermo meter N/A N/A GTS256 Jul. 01 2013 Jul. 01 2014 Conducted Emission: Inventory Cal.Date Cal.Due date Item Test Equipment Manufacturer Model No. No. (mm-dd-yy) (mm-dd-yy) 1 Shielding Room ZhongYu Electron 7.3(L)x3.1(W)x2.9(H) GTS252 Sep. 08 2011 Sep. 07 2013 2 EMI Test Receiver R&S ESCS30 GTS223 Jun. 29 2013 Jun. 29 2014 3 Pulse Limiter R&S ESH3-Z2 GTS224 Jun. 29 2013 Jun. 29 2014 4 Coaxial Switch ANRITSU CORP MP59B GTS225 Jun. 29 2013 Jun. 29 2014 SCHWARZBECK 5 Artificial Mains Network NSLK8127 GTS226 Jun. 29 2013 Jun. 29 2014 MESS 6 Coaxial Cable GTS N/A GTS227 Jul. 07 2013 Jul. 06 2014 7 EMI Test Software AUDIX E3 N/A N/A N/A General used equipment: Inventory Cal.Date Cal.Due date Item Test Equipment Manufacturer Model No. No. (mm-dd-yy) (mm-dd-yy) 1 Barometer ChangChun DYM3 GTS257 July 27 2012 July 27 2013 Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 7 of 18

GTS Report No.: GTSE13080127102 7 Test Results and Measurement Data 7.1 Conducted Emissions Test Requirement: FCC Part15 B Section 15.107 Test Method: ANSI C63.4:2003 Test Frequency Range: 150KHz to 30MHz Class / Severity: Class B Receiver setup: RBW=9KHz, VBW=30KHz, Sweep time=auto Limit: Limit (dBuV) F MH requency range (MHz) Quasi—peak Average 0.15—0.5 66 to 56° 56 to 46* 0.5—5 56 46 5—30 60 50 * Decreases with the logarithm of the frequency. Test setup: Reference Plane LISN LISN 40cm 80cm Row AC power Equipment E.U.T EMI Receiver Test table/Insulation plane Remark EU T. Equioment Unoler Test L/SN Ling impedenceStabilzation Netwaork Test table height=0 Bm Test procedure: 1. The E.U.T and simulators are connected to the main power through a line impedance stabilization network (L.1.S.N.). This provides a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refer to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI €63.4: 2003 on conducted measurement. Test Instruments: Refer to section 6 for details Test mode: Pre—scan all modes in section 5.3, and found the PC mode which is the worst mode, so only the data of worst mode was show on the test report. Test results: Pass Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Bacan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 8 of 18

Report No.: GTSE13080127102 Measurement Data Line: Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 9 of 18

Report No.: GTSE13080127102 Neutral: Notes: 1. An initial pre-scan was performed on the line and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 10 of 18

Report No.: GTSE13080127102 7.2 Radiated Emission Test Requirement: FCC Part15 B Section 15.109 Test Method: ANSI C63.4:2003 Test Frequency Range: 30MHz to 6GHz Test site: Measurement Distance: 3m (Semi-Anechoic Chamber) Receiver setup: Frequency Detector RBW VBW Remark 30MHz-1GHz Quasi-peak 120kHz 300kHz Quasi-peak Value Peak 1MHz 3MHz Peak Value Above 1GHz AV 1MHz 10Hz Average Value Limit: Frequency Limit (dBuV/m @3m) Remark 30MHz-88MHz 40.00 Quasi-peak Value 88MHz-216MHz 43.50 Quasi-peak Value 216MHz-960MHz 46.00 Quasi-peak Value 960MHz-1GHz 54.00 Quasi-peak Value 54.00 Average Value Above 1GHz 74.00 Peak Value Test Procedure: 1. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rota table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. Test setup: Below 1GHz Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 11 of 18

GTS Report No.: GTSE13080127102 c=p Antenna Tower «——«> 3m <:..‘ _ Search EUT y Antenna RF Test Receiver ; \ fan |Mm A 1 A \ DOEI Bs i Po} ; M [ ] C ] Ground Plane J/ Above 1GHz === Antenna Tower ase> 3m <{ HorAnterina EuT v / Am Spectrum Di\ Analyzer ; q t ; Tum 03m [ m \ "* L4 104 Amp]x["xerl.,_D%E 1 1 1 Test environment: Temp.: 25 °C Humic.: _: 52% Press.: : 1 012mbar Measurement Record: Uncertainty: + 4.50B Test Instruments: Refer to section 6 for details Test mode: Pre—scan all modes in section 5.3, and found the PC mode which is the worst mode, so only the data of worst mode was show on the test report. Test results: Pass Note: The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows: Final Test Level =Receiver Reading + Antenna Factor + Cable Factor — Preamplifier Factor Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Bacan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 12 of 18

Report No.: GTSE13080127102 Measurement Data Below 1GHz Horizontal: Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 13 of 18

Report No.: GTSE13080127102 Vertical: Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 14 of 18

Report No.: GTSE13080127102 Above 1GHz Horizontal: Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 15 of 18

Report No.: GTSE13080127102 Vertical: Global United Technology Services Co., Ltd. Project No.: GTSE130801271RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 16 of 18


Document Created: 2019-09-13 20:23:34
Document Modified: 2019-09-13 20:23:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC