User Manual

FCC ID: 2AAR8RETEVISRT36

Users Manual

Download: PDF
FCCID_3525943

RT36


                     1.Antenna




 11.Speaker


                    2.Volume Up
     12.PTT
                    3.Volume Down
                   4.Channel Display
                     5.CTCSS/DCS
13.Lamp Key            Number
     14.Vox
                     6.TX/RX Icon
15.Power display
                    7.Volume
    16.Lock
                    8.Microphone
                    9.MENU
   17.Lamp         10.Power Button




                                    01


            Instructions for use
Specific recommendations:
1.To avoid the risk of burns, do not use the device
 if the antenna is damaged in any way.
2.Do not use the device in a potentially explosive
 environment.
3.Switch off the device if on an airlane or in a
 hospital.
4.Never use the device in close proximity to a
 radio to avoid interference.
5.Remove the batteries if the device is not in use
 for an extended period of time. Never mix used
 and new batteries.
6.Put the transmitter and antenna at least 5 cm
 from your face.
7.Clean the device with a damp cloth. Do not use
 of cleaning agents and solvents.
8.Do not modify the device in any way. If the
 device is damaged, Please make it checked by
 a qualified professional.
9.The device cannot be used to contact the
 emergency services.


                                                02


Unpacking and checking equipment
Welcome to use two-way radio. Carefully unpack
the radio. We recommend you check the listed in
the following table before discarding the package.
 If any item is missing, please contact us
immediately.
Supplied accessories:




  2 x two-way radio             1 x Micro-USB          2 x Belt clip
            AA A




                          AAA




                                           User ' s Manual
                   AA A




        6 x (AAA) NiMH                 1 x User's Manual
        rechargeable
                                                                       03


            AA A
     AA A




            AAA




04


1.Battery Precautions
1.Requires 6 AAA batteries included. Batteries
 are to be changed by an adult.

2.Non-rechargeable batteries must be removed
 from toy before being recharged and
 rechargeable batteries shoud be charged under
 adult supervision.

3.Do not mix alkaline, standard(carbon zinc),or
 rechargeable(nickel cadmium) batteries. Do not
 mix used and new batteries together. Only
 batteries of the recommended type or of a similar
 type should be used.

4.Batteries must be inserted according to the
 correct polarity.Remove batteries from toy when
 storing for an extended period of time or if
 batteries are exhausted.

5.The supply terminals must not be short-circuited.



                                                 05


2.Product description
1. Civilian handheld license-free two-way radio.
2. Automatic squelch .
3. Call tone (10 sets of call sounds to select )
4. Keyboard lock (long press key to lock the
   keyboard misuse) .
5.LED flashlight .
6.7 kinds of LCD display.
7. Low battery alarm .
8.DCS 14,14 channels, each channel a digital
   coded squelch .
9. Vox function .
10. Memory and restore factory settings function
11.Communication distance, according to the
  actual situation around the mountains, trees,
  tall buildings and other judgments Intercom
  communication distance.

3.Functional operation
3.1 Turning the device on/off
To turn the devices on or off, press the on/off
button for 3 seconds, there will be a BEEP sound
to confirm.
                                             06


3.2 Adjusting the volume
To increase the volume, press the Up adjustor
button▲and press the Down▼button to
decrease volume.
Note: The volume level (8) is displayed on the
screen.
3.3 Function option switch
After pressing the power button to enter the
menu settings:
1.Changing the channel: press the button once,
 then change the channel with▲and ▼. Press
 PTT to confirm .The two devices must use the
 same channel .
2.VOX:Press the button twice, for VOX (voice)
 to select, close and 5 level options.
3.P ress the button three times, then choose
 one of the ten call tones and press PTT to confirm.
4.Press the button three times, return to
 standby.

3.4 Vox function
Press the button twice, for VOX (voice) to
select, close and 5 level options.
                                                 07


5 = High sensitivity under low background noise.
4 = Medium High Sensitivity Under Low
    Background Noise Use.
3 = Sensitivity for most applications
2 = Medium low sensitivity for high background
    noise.
1 = low sensitivity for high background noise.
Note: 1. There will be a slight delay between
 starting speech and radio transmission.
2. PTT auto-off when the voice-activated launch
 switch is turned on does not need to be pressed
 by PTT.
3. After the end of the speech two seconds after
 the launch automatically.
3.5 CALL tone selection
Press the     button three times, then
choose one of the ten call tones and press PTT
to confirm. a total of 10 kinds of CALL music,
press the power button to launch.
3.6 Battery Charge Level
The battery charge level is indicated by the
number of square spresent inside the battery
icon on the LCD screen.
                                               08


     Battery Full
     Battery 2/3 charged
     Battery 1/3 charged

     Battery empty
When the battery power is low, the battery icon
will flash and there will be a beep indicating that
the batteries need to be replaced or recharged .
3.7 Memory function
There is a memory function (including the on /
off status) when the machine is turned off or off,
and there is no need to reset the channel .

3.8 Restore factory settings
In the shutdown state, press the key and the
    button at the same time, all settings are
restored to factory settings.

3.9 How to communicate with each other
Mutual communication must be set to the same
channel and sub-audio, the need to press the
PTT call key,Please keep the mouth and
two-way radio distance of about 5 cm,
                                                09


immediately after the release of the PTT button
to release. Let the other party at any time call,
note the same frequency for the radio, so when
the letter can not write, Send no letter when the
letter, in the launch of the signal when they can
not hear each other to speak, the other side
speaking time can not talk with each other, if
forced to speak according to PTT, the other party
will say can not hear, they said the other side can
not hear.When the PTT is launched, the LCD has
a transmission indicator ; the LCD is signed at
reception .
4 . Channel and frequency (MHz).DCS
  Europe
      Channel   Frequency   DCS    Number
        1       446.00625   N114     53
        2       446.01875   N131     57
        3       446.03125   N132     58
        4       446.04375   N165     65
        5       446.05625   N226     70
        6       446.06875   N306     79
        7       446.08125   N371     88
        8       446.09375   N503     99

                                                10


America
    Channel   Frequency   DCS    Number

      1       462.5625    N43     44
      2       462.5875    N65     48
      3       462.6125    N116    55
      4       462.6375    N205    68
      5       462.6625    N261    75
      6       462.6875    N265    77
      7       462.7125    N271    78
      8       467.5625    N306    79
      9       467.5875    N311    80
      10      467.6125    N331    82
      11      467.6375    N365    87
      12      467.6625    N431    93
      13      467.6875    N466    98
      14      467.7125    N503    99




                                          11


 Name                      Gender

 Add and postal code:




Note:
1.This warranty card is only applicable to two-way
radio of the above-listed model and serial number.
2.The warranty card is an important document for the
end-user to enjoy warranty service, please keep it well.
3.The warranty card shall be filled and chopped by the
dealer ,or it is invalid.
                                                     12


Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

SAR tests are conducted using standard operating positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested frequency bands, although the SAR is
determined at the highest certified power level, the actual SAR level of the device while operating
can be well below the maximum value. Before a new model is a available for sale to the public, it
must be tested and certified to the FCC that it does not exceed the exposure limit established by
the FCC, Tests for each product are performed in positions and locations as required by the FCC.
For body worn operation, this device has been tested and meets the FCC RF exposure guidelines
when used with an accessory designated for this product or when used with an accessory that
Contains no metal.
To maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter and antenna
at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna
pointed up and away from the face.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to comply with the FCC RF exposure requirements, the antenna installation
must comply with following:
Users must be fully aware of the hazards of the exposure and able to exercise control over their
RF exposure to qualify for the higher exposure limits.

Your wireless hand-held portable transceiver contains a low power transmitter. This product sends
out radio frequency (RF) signals when the Push-to-Talk (PTT) button is pressed.
The device is authorized to operate at a duty factor not to exceed 50%.



Document Created: 2017-08-24 16:06:38
Document Modified: 2017-08-24 16:06:38

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC