Users Manual

FCC ID: 2AAPKKF-9201

Users Manual

Download: PDF
FCCID_3895892

Instruction Manual 4 USB wireless charger(KF-9201) 7141-20 1 x Lunation Wireless Charging Station 1 x 1.2m AC Removable Power Cable 1 x Instruction Manual Input power: AC 100-240V 50-60HZ USB Outputs: 5V/2.4A max, total 5.4A. Wireless Output: DC 5V/1A Long press the LED Nightlight to turn light ON, repeat to turn the light OFF. Connecting charging station: Take provided AC removable power cable, insert cable into the power cable inport on the charging station. Once connected to the charging station, plug in power cable to wall power source. Charging mobile phones and other electronic devices: The charging station has 4xUSB output ports,with a maximum out 2.4A Connect the desired cable to your mobile phone/device using the appropriate connector. Connect the other end of the charging station. Remove desired cable from your mobile device when it is fully charged. Charging Mobile phones and other electronic devices with wireless output. Place wireless charging enable device on Wireless Charging Pad by setting device on the phone stand. It will automatically charge. Note: In order to charge devices, use only

the accessory cable or the cable included with your own device by the manufacturer. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: approved by the party responsible for compliance could void the user’s authority to operate the equipment. WARNING–When using this product, basic precautions should always be followed, including the following: Read all the instructions before using the product. Charge the power bank fully before initial use. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. Take it to or repair is required. Incorrect reassembly or temperatures above 212ºF may cause explosion.

repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. What’s included: Features: LED Nightlight: Instructions: FCC Statement: SAFETY PRECAUTIONS: Wireless Charging Pad LED Nightlight Phone Stand Power Cable Inport 4x USB Output Ports Made in China WIRELESS CHARGING ENABLED DEVICES: iPhone 8/8Plus/X, Samsung Galaxy S8/ S8+/S7/S7 Edge/S6/S6 Edge, Nokia Lumia 1020/920/928, HTC 8X, HTC Droid DNA, HTC Rzound, HTC Incredibly 4G LTE, Moto Droid Turbo, Motorola Moto 360 Smart Watch, Moto Droid Maxx, Droid Mini, Google Nexus 6/4/5/7 (2013), LG D1L, LG LTE2, LG G2 (Verizon), Blackberry Z30 (Verizon) FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.


Document Created: 2018-05-10 10:06:50
Document Modified: 2018-05-10 10:06:50
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC