Test Report

FCC ID: 2AAP6M1042

Test Report

Download: PDF
FCCID_2716332

TEST RE EPORT Report Reference R No o. .................... : TRE1 1507002102 2 R/C……… ….:47871 FCC ID .............................................. : 2AAP P6M1042 Applicant’s name ............................ : SHENZHEN ZOW WEE TECHN NOLOGY CO O., LTD. Scien nce &Techno ology Industrrial Park of P Privately Address..............................................: Owneed Enterprises, Pingshan n, Xili, Nansh han District, Shenzhen, S P PR CHINNA Manufactu urer.......................................: SHENZHEN ZOW WEE TECHN NOLOGY CO O., LTD. Scien nce &Techno ology Industrrial Park of P Privately Address................................................: Owneed Enterprises, Pingshan n, Xili, Nansh han District, Shenzhen, S P PR CHINNA Test item m description n .................... : Table et PC Trade Ma ark ........................................ : NUV VISION,TMAX X,DOPO,NOBIS,APEX Model/Typ pe reference e....................... : TM10 01W535L Listed Mo odel(s) .................................. : DPW W10A,DPW10 0B,NBW1027 7,M1042,M1059,M1059A A1 Standard d .......................................... : FCC CFR Title 47 4 Part 15 Su ubpart C Se ection 15.247 7 eceipt of test sample………..: Date of re May 12, 2015 Date of te esting………… ……………… ……: May 12, 2015 - July 13, 2015 Date of issue………… ………………… …...: July 13, 2015 Result .................. …… ……………… …...: PASS S Compiled by ( position+ +printedname+signature)) ...: File administrator a rs Any Yang Supervise ed by (position+ +printedname e+signature) ....: ect Engineer Lion Cai Proje Approved by (position+ +printedname e+signature) ....: RF Manager M Han ns Hu Testing Laboratory L N Name ............. : Shen nzhen Huato ongwei Interrnational Ins spection Co o., Ltd Address..............................................: Bldg3 3, Hongfa Hii-tech Industrrial Park, Ge enyu Road, Shenzhen, S China a Shenzhen n Huatongw wei Internatio onal Inspec ction Co., Ltd d. All rights reserved. This publication may beb reproduce ed in whole or o in part for non-commerrcial purpose es as long as s the Shenzhen n Huatongwe ei Internation nal Inspectionn Co., Ltd is acknowledge ed as copyrig ght owner an nd source of the materrial. Shenzheen Huatongw wei International Inspectioon Co., Ltd taakes no resp ponsibility for and will not assume liability for damages resullting from the e reader's intterpretation of o the reproduced materia al due to its placemennt and contexxt. The test report r merelyy correspondds to the test sample. ermitted to copy extracts of these tesst result witho It is not pe out the writte en permission n of the test laboratory. l

Report No: TRE1507002102 Page: 2 of 19 Issued: 2015-07-13 Contents 1. TEST STANDARD S AND TEST DESCR IPTION 3 1.1. Test Standards 3 1.2. Test Description 3 2. SUMMARY 4 2.1. Client Information 4 2.2. Product Description 4 2.3. Operation state 5 2.4. EUT configuration 5 2.5. Modifications 5 3. TEST EN VIRONMENT 6 3.1. Address of the test laboratory 6 3.2. Test Facility 6 3.3. Environmental conditions 7 3.4. Statement of the measurement uncertainty 7 3.5. Equipments Used during the Test 8 4. TEST COND ITION S AND R ESULTS 9 4.1. Antenna requirement 9 4.2. Conducted Emission (AC Main) 10 4.3. Spurious Emission (radiated) 13 5. TEST SETUP PHOTOS OF THE EUT 18 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT 19

Report No: TRE1507002102 Page: 3 of 19 Issued: 2015-07-13 1. TEST STANDARDS ANDTEST DESCRIPTION 1.1. Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013:AmericanNationalStandardforTestingUnlicensedWirelessDevicese 1.2. Test Description ReportSection Test Item Section in CFR 47 Result 4.1 Antenna Requirement 15.203/15.247 (c) Pass 4.2 AC Power Line Conducted Emission 15.207 Pass 4.3 Radiated Emission 15.247(d)/15.209 Pass Remark: The measurement uncertainty is not included in the test result.

Report No: TRE1507002102 Page: 4 of 19 Issued: 2015-07-13 2. SUMMARY 2.1. Client Information Applicant: SHENZHEN ZOWEE TECHNOLOGY CO., LTD. Address: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA Manufacturer: SHENZHEN ZOWEE TECHNOLOGY CO., LTD. Address: Science &Technology Industrial Park of Privately Owned Enterprises, Pingshan, Xili, Nanshan District, Shenzhen, PR CHINA 2.2. Product Description Name of EUT Tablet PC Trade Mark: NUVISION,TMAX,DOPO,NOBIS,APEX Model No.: TM101W535L Listed Model(s): DPW10A,DPW10B,NBW1027,M1042,M1059,M1059A1 Power supply: DC 3.7V From internal battery Adapter information: Model: TEKA018-0522500UK Input:100-240Va.c., 50/60Hz,0.5A Output: 5.2Vd.c.,2.5A Bluetooth Version: Supported BT4.0+EDR Modulation: GFSK, π/4DQPSK, 8DPSK Operation frequency: 2402MHz~2480MHz Channel number: 79 Channel separation: 1MHz Antenna type: Internal Antenna Antenna gain: 0.72dBi Report Version: This copy was issued base on TRE1505006202(Issued data:2015-05-18), the adapter and the LCD Screen have been changed ,so the data of test item Conducted Emission and Spurious Emission (radiated) were updated.Others data was same as original report.

Report No: TRE1507002102 Page: 5 of 19 Issued: 2015-07-13 2.3. Operation state ‹ Test frequency list According to section 15.31(m), regards to the operating frequency range over 10 MHz, must select three channel which were tested. the Lowest frequency, the middle frequency, and the highest frequency of channel were selected to perform the test, please see the above gray bottom. Channel Frequency (MHz) 0 2402 1 2403 ... ... 39 2441 ... ... 77 2479 78 2480 ‹ Test mode For RF test items: the engineering test program was provided and enabled to make EUT continuous transmit/receive. For AC power line conducted emissions: the EUT was set to connect with the Bluetooth under large package sizes transmission. 2.4. EUT configuration The following peripheral devices and interface cables were connected during the measurement: ● - supplied by the manufacturer ○ - supplied by the lab ○ Power Cable Length (m) : / Shield : / Detachable : / ○ Multimeter Manufacturer : / Model No. : / 2.5. Modifications No modifications were implemented to meet testing criteria.

Report No: TRE1507002102 Page: 6 of 19 Issued: 2015-07-13 3. TEST ENVIRONMENT 3.1. Address of the test laboratory Laboratory:Shenzhen Huatongwei International Inspection Co., Ltd. (Gongming) Address: Bldg3, Hongfa Hi-tech Industrial Park, Genyu Road, Shenzhen, China Phone: 86-755-26748019 Fax: 86-755-26748089 3.2. Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L1225 Shenzhen Huatongwei International Inspection Co., Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2005 General Requirements) for the Competence of Testing and Calibration Laboratories, Date of Registration: February 28, 2015. Valid time is until February 27, 2018. A2LA-Lab Cert. No. 2243.01 Shenzhen Huatongwei International Inspection Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. Valid time is until Sept 30, 2015. FCC-Registration No.: 662850 Shenzhen Huatongwei International Inspection Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files. Registration 662850, Renewal date Jul. 01, 2012, valid time is until Jun. 01, 2015. FCC-Registration No.: 317478 Shenzhen Huatongwei International Inspection Co., Ltd. (Gongming EMC Laboratory) has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files. Registration 317478, Renewal date July 18, 2014, valid time is until July. 18, 2017. IC-Registration No.: 5377A The 3m Alternate Test Site of Shenzhen Huatongwei International Inspection Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for the performance of radiated measurements with Registration No. 5377A on Dec. 31, 2013, valid time is until Dec. 31, 2016. IC-Registration No.: 5377B The 3m Alternate Test Site of Shenzhen Huatongwei International Inspection Co., Ltd. (Gongming EMC Laboratory) has been registered by Certification and Engineering Bureau of Industry Canada for the performance of radiated measurements with Registration No. 5377B on September 3, 2014, valid time is until September 3, 2017. ACA Shenzhen Huatongwei International Inspection Co., Ltd. EMC Laboratory can also perform testing for the Australian C-Tick mark as a result of our A2LA accreditation. VCCI The 3m Semi-anechoic chamber (12.2m×7.95m×6.7m) of Shenzhen Huatongwei International Inspection Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.:R-2484. Date of Registration: Dec. 20, 2012. Valid time is until Dec. 29, 2015. Radiated disturbance above 1GHz measurement of Shenzhen Huatongwei International Inspection Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-292. Date of Registration: Dec. 24, 2013. Valid time is until Dec. 23, 2016. Main Ports Conducted Interference Measurement of Shenzhen Huatongwei International Inspection Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: C-2726. Date of Registration: Dec. 20, 2012. Valid time is until Dec. 19, 2015. Telecommunication Ports Conducted Interference Measurement of Shenzhen Huatongwei International Inspection Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: T-1837. Date of Registration: May 07, 2013. Valid time is until May 06, 2016. DNV Shenzhen Huatongwei International Inspection Co., Ltd. has been found to comply with the requirements of DNV towards subcontractor of EMC and safety testing services in conjunction with the EMC and Low voltage Directives and in the voluntary field. The acceptance is based on a formal quality Audit and follow-ups according to relevant parts of ISO/IEC Guide 17025 (2005), in accordance with the requirements of the DNV Laboratory Quality Manual towards subcontractors. Valid time is until Aug. 24, 2016.

Report No: TRE1507002102 Page: 7 of 19 Issued: 2015-07-13 3.3. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Temperature: 15~35°C lative Humidity: 30~60 % Air Pressure: 950~1050mba 3.4. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to TR-100028-01”Electromagnetic compatibilityand Radio spectrum Matters (ERM);Uncertainties in the measurementof mobile radio equipment characteristics;Part 1”and TR-100028-02 “Electromagnetic compatibilityand Radio spectrum Matters (ERM);Uncertainties in the measurementof mobile radio equipment characteristics;Part 2 “ and is documented in the Shenzhen Huatongwei International Inspection Co., Ltd quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for Shenzhen Huatongweilaboratory is reported: Test Items MeasurementUncertainty Notes Transmitter power conducted 0.57 dB (1) Transmitter power Radiated 2.20 dB (1) Conducted spurious emission 9KHz-40 GHz 1.60 dB (1) Radiated spurious emission 9KHz-40 GHz 2.20 dB (1) Conducted Emission 9KHz-30MHz 3.39 dB (1) Radiated Emission30~1000MHz 4.24 dB (1) Radiated Emissio 1~18GHz 5.16 dB (1) Radiated Emissio 18-40GHz 5.54 dB (1) Occupied Bandwidth --------- (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=1.96.

Report No: TRE1507002102 Page: 8 of 19 Issued: 2015-07-13 3.5. Equipments Used during the Test Conducted Emission (AC Main) Item Test Equipment Manufacturer Model No. Serial No. Last Cal 1 Artificial Mains Rohde&Schwarz ESH2-Z5 100028 2014/11/01 2 EMI Test Receiver Rohde&Schwarz ESCI3 100038 2014/11/01 3 Pulse Limiter Rohde&Schwarz ESHSZ2 100044 2014/11/01 4 EMI Test Software Rohde&Schwarz ES-K1 V1.71 N/A N/A Radiated Emission Item Test Equipment Manufacturer Model No. Serial No. Last Cal Ultra-Broadband 1 ShwarzBeck VULB9163 538 2014/11/01 Antenna 2 EMI TEST RECEIVER Rohde&Schwarz ESI 26 100009 2014/11/01 3 EMI TEST Software Audix E3 N/A N/A 4 TURNTABLE ETS 2088 2149 N/A 5 ANTENNA MAST ETS 2075 2346 N/A 6 EMI TEST Software Rohde&Schwarz ESK1 N/A N/A 7 HORNANTENNA ShwarzBeck 9120D 1011 2014/11/01 8 Amplifer Sonoma 310N E009-13 2014/11/01 JS4-00101800- 9 JS amplifer Rohde&Schwarz F201504 2014/11/01 28-5A Compliance Direction 10 High pass filter BSU-6 34202 2014/11/01 systems 11 HORNANTENNA ShwarzBeck 9120D 1012 2014/11/01 Compliance Direction 12 Amplifer PAP1-4060 120 2014/11/01 systems 13 Loop Antenna Rohde&Schwarz HFH2-Z2 100020 2014/11/01 14 TURNTABLE MATURO TT2.0 ---- N/A 15 ANTENNA MAST MATURO TAM-4.0-P ---- N/A 16 Horn Antenna SCHWARZBECK BBHA9170 25841 2014/11/01 ULTRA-BROADBAND 17 Rohde&Schwarz HL562 100015 2014/11/01 ANTENNA Maximum Peak Output Power / Power Spectral Density / 6dB Bandwidth / Band Edge Compliance of RF Emission / Spurious RF Conducted Emission Item Test Equipment Manufacturer Model No. Serial No. Last Cal 1 Spectrum Analyzer Rohde&Schwarz FSP 1164.4391.40 2014/11/01 The Cal.Interval was one year

Report No: TRE1507002102 Page: 9 of 19 Issued: 2015-07-13 4. TEST CONDITIONS AND RESULTS 4.1. Antenna requirement Requirement FCC CFR Title 47 Part 15 Subpart C Section 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of anantenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. FCC CFR Title 47 Part 15 Subpart C Section 15.247(c) (1)(i): (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. Test Result: The antenna is integralantenna, the best case gain of the antenna is0.72dBi

Report No: TRE15 507002102 Page: 10 of o 19 Issued: 2015-07-13 4.2. Co onducted Emission E (AC Main)) LIMIT FCC CFR R Title 47 Parrt 15 Subpartt C Section 15.207 1 Limit (dBuV V) Frequency range (MHz) Quasi-peak Averrage 0.155-0.5 66 to 56* 56 to o 46* 0.5 5-5 56 466 5-330 60 500 * Decreasses with the logarithm l of the t frequenccy. TEST CO ONFIGURATIION TEST PROCEDURE 1. The EUT E was setuup according g to ANSI C663.4: 2014 an nd tested acccording to ANNSI C63.10:22013 for compliance to FCC 47CFR 15 5.247 require ements. 2. The EUT E was placced on a plattform of nomminal size, 1 m by 1.5 m, raised r 80 cmm above thecconducting grounnd plane. The e vertical con nducting planne was locate heEUT. All other surfacess ed 40 cm to the rear of th of EUUT were at leaast 80 cm froom any otherr grounded conductingsu c urface. 3. The EUT E and simulators are connected c to the main poower through a line imped dancestabiliz zation networrk (LISNN). The LISN provides a 50 5 ohm /50uH H coupling immpedance foor themeasurring equipme ent. 4. The peripheral p deevices are alsso connected d to the main n power throuugh aLISN. (Please referr to the blockk diagraam of the tesst setup and photographss) 5. Each current-carryying conducttor of the EU UT power corrd, except thee ground (sa afety) conduc ctor,was individ dually conneected through h a LISN to th he input powwer source. 6. The excess e lengthh of the poweer cord between the EUT T and the LIS SN receptacle e were foldedback and forth at a the centerr of the lead to t form a bunndle not exceeeding 40 cmm in length. 7. Conducted emissions were invvestigated ovver the frequ uency range from f 0.15MH Hz to 30MHz zusing a receivver bandwidtth of 9 kHz. TEST RESULTS

Report No: TRE1507002102 Page: 11 of 19 Issued: 2015-07-13 Test mode: BT Polarization L

Report No: TRE1507002102 Page: 12 of 19 Issued: 2015-07-13 Test mode: BT Polarization N

Report No: TRE1507002102 Page: 13 of 19 Issued: 2015-07-13 4.3. Spurious Emission (radiated) LIMIT FCC CFR Title 47 Part 15 Subpart C Section 15.209 Frequency Limit (dBuV/m @3m) Value 30MHz-88MHz 40.00 Quasi-peak 88MHz-216MHz 43.50 Quasi-peak 216MHz-960MHz 46.00 Quasi-peak 960MHz-1GHz 54.00 Quasi-peak 54.00 Average Above 1GHz 74.00 Peak TEST CONFIGURATION ‹ Below 30MHz ‹ 30MHz~1000MHz ‹ Above 1GHz

Report No: TRE1507002102 Page: 14 of 19 Issued: 2015-07-13 TEST PROCEDURE 1. The EUT was placed on the top of a rotating table 0.8 meters above the groundat a 3 meter camber. The table was rotated 360 degrees todetermine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, whichwas mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and thenthe antenna was tuned to heights from 1 meter to 4 meters and the rotatablewas turned from 0 degrees to 360 degrees to find the maximum reading. 5. Use the following spectrum analyzer settings a) Span shall wide enough to fully capture the emission being measured; b) Below 1GHz, RBW=120KHz, VBW=300KHz, Sweep=auto, Detector function=peak, Trace=max hold; If the emission level of the EUT measured by the peak detectoris 3 dB lower than the applicable limit, the peak emission level will be reported. Otherwise, theemission measurement will be repeated using the quasi-peak detector and reported. c) Above 1GHz, RBW=1MHz, VBW=3MHz for Peak value RBW=1MHz, VBW=10Hz for Average value. TEST RESULTS Noted: Have pre-scan all modulation mode, found the GFSK modulation which it was worst case, so only the worst case’s data on the test report. Measurement data: „ 9kHz ~ 30MHz The low frequency, which started from 9 kHz to 30MHz, was pre-scanned and the result which was 20dB lower than the limit line per 15.31(o) was not reported. „ 30MHz ~ 1GHz

Report No: TRE1507002102 Page: 15 of 19 Issued: 2015-07-13

Report No: TRE1507002102 Page: 16 of 19 Issued: 2015-07-13 „ Above 1GHz CH00 for GFSK Read Antenna Cable Preamp Margin Frequency Level Limit Line Test Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) value (dBuV) (dB/m) (dB) (dB) (dB) 4501.49 39.31 30.90 8.98 38.33 40.86 74.00 -33.14 Vertical 7508.69 35.79 36.22 10.97 38.16 44.82 74.00 -29.18 Vertical 10165.29 35.76 38.49 12.61 38.14 48.72 74.00 -25.28 Vertical 12110.00 * Vertical Peak 4490.05 38.44 30.90 8.98 38.33 39.99 74.00 -34.01 Horizontal 7172.41 36.05 35.95 10.84 38.10 44.74 74.00 -29.26 Horizontal 10295.50 35.69 35.58 12.71 38.14 48.84 74.00 -25.16 Horizontal 12110.00 * Horizontal 4501.49 31.31 30.90 8.98 38.33 32.86 54.00 -21.14 Vertical 7508.69 26.25 36.22 10.97 38.16 35.28 54.00 -18.72 Vertical 10165.29 29.32 38.49 12.61 38.14 42.28 54.00 -11.72 Vertical 12110.00 * Vertical Average 4490.05 31.44 30.90 8.98 38.33 32.99 54.00 -21.01 Horizontal 7172.41 28.83 35.95 10.84 38.10 37.52 54.00 -16.48 Horizontal 10295.50 31.96 35.58 12.71 38.14 42.11 54.00 -11.89 Horizontal 12110.00 * Horizontal CH39 for GFSK Read Antenna Cable Preamp Margin Frequency Level Limit Line Test Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) value (dBuV) (dB/m) (dB) (dB) (dB) 4882.00 39.94 30.88 5.7 35.27 41.25 74.00 -32.75 Vertical 7323.00 36.78 35.82 6.91 35.13 44.38 74.00 -29.62 Vertical 9764.00 38.03 37.45 8.84 35.53 48.79 74.00 -25.21 Vertical 12205.00 * Vertical Peak 4882.00 43.25 30.88 5.7 35.27 44.56 74.00 -29.44 Horizontal 7323.00 37.37 35.82 6.91 35.13 44.97 74.00 -29.03 Horizontal 9764.00 36.89 37.45 8.84 35.53 47.65 74.00 -26.35 Horizontal 12205.00 * Horizontal 4882.00 29.78 30.88 5.7 35.27 31.09 54.00 -22.91 Vertical 7323.00 28.78 35.82 6.91 35.13 36.38 54.00 -17.62 Vertical 9764.00 32.87 37.45 8.84 35.53 43.63 54.00 -10.37 Vertical 12205.00 * Vertical Average 4882.00 35.54 30.88 5.7 35.27 36.85 54.00 -17.15 Horizontal 7323.00 29.19 35.82 6.91 35.13 36.79 54.00 -17.21 Horizontal 9764.00 30.8 37.45 8.84 35.53 41.56 54.00 -12.44 Horizontal 12205.00 * Horizontal Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. “*”, means this data is the too weak instrument of signal is unable to test. 3. The emission levels of other frequencies are very lower than the limit and not show in test report.

Report No: TRE1507002102 Page: 17 of 19 Issued: 2015-07-13 CH78 for GFSK Read Antenna Cable Preamp Margin Frequency Level Limit Line Test Level Factor Loss Factor Limit Polarization (MHz) (dBuV/m) (dBuV/m) value (dBuV) (dB/m) (dB) (dB) (dB) 4641.12 35.58 30.99 9.09 38.43 41.23 74.00 -32.77 Vertical 7009.96 36.48 35.82 10.77 38.06 45.01 74.00 -28.99 Vertical 9088.19 36.41 37.94 11.75 37.97 48.13 74.00 -25.87 Vertical 12380.00 * Vertical Peak 5448.41 38.23 32.29 9.60 38.29 41.83 74.00 -32.17 Horizontal 8042.90 35.83 36.75 11.24 38.24 45.58 74.00 -28.42 Horizontal 9660.72 37.20 38.20 12.17 38.08 49.49 74.00 -24.51 Horizontal 12380.00 * Horizontal 4641.12 29.67 30.99 9.09 38.43 31.32 54.00 -22.68 Vertical 7009.96 29.60 35.82 10.77 38.06 38.13 54.00 -15.87 Vertical 9088.19 31.06 37.94 11.75 37.97 42.78 54.00 -11.22 Vertical 12380.00 * Vertical Average 5448.41 26.78 32.29 9.60 38.29 30.38 54.00 -23.62 Horizontal 8042.90 29.10 36.75 11.24 38.24 38.85 54.00 -15.15 Horizontal 9660.72 32.50 38.20 12.17 38.08 44.79 54.00 -9.21 Horizontal 12380.00 * Horizontal Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. “*”, means this data is the too weak instrument of signal is unable to test. 3. The emission levels of other frequencies are very lower than the limit and not show in test report.

Report No: TRE1507002102 Page: 18 of 19 Issued: 2015-07-13 5. Test Setup Photos of the EUT Radiated Emission Conducted Emission (AC Mains)

Report No: TRE1507002102 Page: 19 of 19 Issued: 2015-07-13 6. External and Internal Photos of the EUT Reference to Test Report TRE1505006201 .......................End of Report.........................


Document Created: 2015-08-14 14:09:15
Document Modified: 2015-08-14 14:09:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC