Test Report

FCC ID: 2AANZRCMNTR

Test Report

Download: PDF

FCCID_3562838

Report No.: AGC10295170803FE03
Page 2 of 22

Report Revise Record

Report Version Revise Time Issued Date Valid Version Notes

V1.0 / July 06, 2017 Valid Original Report

Report No.: AGC10295170803FE03
Page 3 of 22

TABLE OF CONTENTS
1. VERIFICATION OF CONFORMITY .............................................................................................................. 4
2. GENERAL INFORMATION ........................................................................................................................... 5
3. MEASUREMENT UNCERTAINTY................................................................................................................ 6
4. DESCRIPTION OF TEST MODES................................................................................................................ 6
5. SYSTEM TEST CONFIGURATION .............................................................................................................. 7
5.1. CONFIGURATION OF EUT SYSTEM ................................................................................................... 7
5.2. EQUIPMENT USED IN EUT SYSTEM .................................................................................................. 7
5.3. SUMMARY OF TEST RESULTS ........................................................................................................... 7
6. TEST FACILITY............................................................................................................................................. 8
7. RADIATED EMISSION.................................................................................................................................. 9
7.1TEST LIMIT .............................................................................................................................................. 9
7.2. MEASUREMENT PROCEDURE ......................................................................................................... 10
7.3. TEST SETUP ....................................................................................................................................... 11
7.4. TEST RESULT ..................................................................................................................................... 12
8. 20DB BANDWIDTH .................................................................................................................................... 15
8.1. MEASUREMENT PROCEDURE ......................................................................................................... 15
8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ............................................................... 15
8.3. MEASUREMENT RESULTS ............................................................................................................... 16
APPENDIX A: PHOTOGRAPHS OF TEST SETUP ....................................................................................... 17
APPENDIX B: PHOTOGRAPHS OF EUT ...................................................................................................... 18

Report No.: AGC10295170803FE03
Page 5 of 22

2. GENERAL INFORMATION
A major technical description of EUT is described as following
Operation Frequency 27.145MHz
Maximum field strength 71.80 dBμV/m@3m(AV)
Modulation AM
Number of channels 1
Antenna Gain 3dBi
Antenna Designation Integral Antenna (Met 15.203 Antenna requirement)
Hardware Version YED1705T-01
Software Version V1.0
Power Supply DC3V by battery

Report No.: AGC10295170803FE03
Page 6 of 22

3. MEASUREMENT UNCERTAINTY
The reported uncertainty of measurement y ±U，where expended uncertainty U is based on a standard
uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。

No. Item Uncertainty
1 Conducted Emission Test ±3.18dB
2 All emissions,radiated ±3.91Db
3 Temperature ±0.5°C
4 Humidity ±2%

4. DESCRIPTION OF TEST MODES
NO. TEST MODE DESCRIPTION
1 Transmitting mode
Note:
1. All the test modes can be supply by battery, only the result of the worst case was recorded in the
report, if no other cases.
2. For Radiated Emission, 3axis were chosen for testing for each applicable mode.

Report No.: AGC10295170803FE03
Page 7 of 22

5. SYSTEM TEST CONFIGURATION
5.1. CONFIGURATION OF EUT SYSTEM
Configure :

EUT

5.2. EQUIPMENT USED IN EUT SYSTEM
Item Equipment Model No. ID or Specification Remark
1 Remote control NFL-RC-MNTR 2AANZRCMNTR EUT

5.3. SUMMARY OF TEST RESULTS

FCC RULES DESCRIPTION OF TEST RESULT
§15.227 Radiated Emission Compliant
§15.215 20dB bandwidth Compliant

Report No.: AGC10295170803FE03
Page 8 of 22

6. TEST FACILITY
Site Dongguan Precise Testing Service Co., Ltd.
Building D, Baoding Technology Park,Guangming Road2, Dongcheng District,
Location
Dongguan, Guangdong, China.
FCC Registration No. 371540
The test site is constructed and calibrated to meet the FCC requirements in
Description
documents ANSI C63.4:2014.

ALL TEST EQUIPMENT LIST
Radiated Emission Test Site
Model Serial Last Due
Name of Equipment Manufacturer
Number Number Calibration Calibration
Rohde &
EMI Test Receiver ESCI 101417 July 4, 2017 July 3, 2018
Schwarz
Trilog Broadband Antenna
SCHWARZBECK VULB9160 9160-3355 July 4, 2017 July 3, 2018
(25M-1GHz)
Signal Amplifier SCHWARZBECK BBV 9475 9745-0013 July 4, 2017 July 3, 2018
RF Cable SCHWARZBECK AK9515E 96221 July 4, 2017 July 3, 2018
3m Anechoic Chamber CHENGYU 966 PTS-001 July 4, 2017 July 3, 2018
MULTI-DEVICE Positioning
Max-Full MF-7802 MF780208339 N/A N/A
Controller
Active loop antenna
Schwarzbeck FMZB1519 1519-038 June 6, 2017 June 5, 2018
(9K-30MHz)
Spectrum analyzer Agilent E4407B MY46185649 June 6, 2017 June 5, 2018

Report No.: AGC10295170803FE03
Page 9 of 22

7. RADIATED EMISSION
7.1TEST LIMIT
Standard FCC15.227

Fundamental Frequency Field Strength of Fundamental Field Strength of Fundamental
(micro volts/meter) AV Detector (micro volts/meter) PK Detector
26.96-27.28MHz 10000(80 dBμV/m) 100000(100 dBμV/m)

Standard FCC 15.209

Frequency Distance Field Strengths Limit
(MHz) Meters μ V/m dB(μV)/m
0.009 ~ 0.490 300 2400/F(kHz) ---
0.490 ~ 1.705 30 24000/F(kHz) ---
1.705 ~ 30 30 30 ---
30 ~ 88 3 100 40.0
88 ~ 216 3 150 43.5
216 ~ 960 3 200 46.0
960 ~ 1000 3 500 54.0
Above 1000 3 Other:74.0 dB(μV)/m (Peak) 54.0 dB(μV)/m (Average)
Remark： (1) Emission level dBμ V = 20 log Emission level μ V/m
(2) The smaller limit shall apply at the cross point between two frequency bands.
(3) Distance is the distance in meters between the measuring instrument, antenna and the closest
point of any part of the device or system.

Report No.: AGC10295170803FE03
Page 10 of 22

7.2. MEASUREMENT PROCEDURE
1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter
above ground. The phase center of the receiving antenna mounted on the top of a height-variable
antenna tower was placed 3 meters far away from the turntable.
2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine
the position of the highest radiation.
3. The height of the broadband receiving antenna was varied between one meter and four meters above
ground to find the maximum emissions field strength of both horizontal and vertical polarization.
4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was
rotated (from 0 degree to 360 degrees) to find the maximum reading.
5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth
under Maximum Hold Mode.
6. If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then
testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not
have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz.
7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the
recorded data should be QP measured by receiver. High - Low scan is not required in this case.

The following table is the setting of spectrum analyzer and receiver.
Spectrum Parameter Setting
Start ~Stop Frequency 9KHz~150KHz/RB 200Hz for QP
Start ~Stop Frequency 150KHz~30MHz/RB 9KHz for QP
Start ~Stop Frequency 30MHz~1000MHz/RB 120KHz for QP

Receiver Parameter Setting
Start ~Stop Frequency 9KHz~150KHz/RB 200Hz for QP
Start ~Stop Frequency 150KHz~30MHz/RB 9KHz for QP
Start ~Stop Frequency 30MHz~1000MHz/RB 120KHz for QP

Report No.: AGC10295170803FE03
Page 12 of 22

7.4. TEST RESULT
RADIATED EMISSION BELOW 30MHZ
EUT： Remote Control Model Name. ： NFL-RC-MNTR
Temperature： 20 ℃ Relative Humidtity： 48%
Pressure： 1010 hPa Test Voltage ： DC3V
Test Mode ： Mode 1 Polarization : --

Reading Factor Level Limit
Frequency Margin
Polarization dB(uV) dB dB(uV/m) dB(uV/m) Pass/Fail
MHz dB
PK (1/m) PK PK
27.145 Face 58.33 14.5 72.83 100 27.17 Pass
27.145 Side 50.45 14.5 64.95 100 35.05 Pass
Reading Factor Level Limit
Frequency Margin
Polarization dB(uV) dB dB(uV/m) dB(uV/m) Pass/Fail
MHz dB
PK (1/m) AVG AVG
27.145 Face 57.30 14.5 71.80 80 8.20 Pass
27.145 Side 49.07 14.5 63.57 80 16.43 Pass

Note: Other emissions from 9 kHz to 30 MHz are considered as ambient noise. No recording in the test
report.

Document Created: 2017-09-15 05:54:02
Document Modified: 2017-09-15 05:54:02

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC