User Manual

FCC ID: 2AANZMODC

Users Manual

Download: PDF
FCCID_4174784

Shenzhen Lingdong Intelligent Technology Co., Ltd

                        TR01

 Customer:
 Sample Name:Bluetooth Music
 Sample Number:TR01


 Signature:                             DATE:




       TESTED BY               CHECKED BY       APPROVED BY
         MARK                    WELL              JIAN




 Customer Signature:
       TESTED BY               CHECKED BY       APPROVED BY


PCB Size:69.0mm*35.0mm*1.6mm
            Power input
            2.54mm X4
                          TOP Layer
                                         Speaker  Output
                                         2.0mm X2




  RGB LED
  Output
  2.0mmX4

                          Bottom layer


Function:
  1、Driving 5V RGB LED;
  2、Bluetooth Music;
  3、Mono Output;
Port specification:
Power input
 EN:Enable input boot up
 GND:Power Ground
 BAT+:Power Input
 RX:UART TX Input
Speaker :Speaker Output
RGB LED Port:
 BLUE:Blue light signal output
 GREEN:Green light signal output
 RED:Red light signal output
 5V:5V Power Output

Product specification:
Input voltage range:             12V~42.5V
Enable input voltage range:      3.3V~5V
Hardware version:          V4.2(MUSIC)
Speaker Spec:              4Ω 3W、2Ω 5W
Operating Ambient Temperature:        -20 ~ +80℃
Frequency:             2.402GHz~2.480GHz


Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
     Reorient or relocate the receiving antenna.
     Increase the separation between the equipment and receiver.
     Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
     Consult the dealer or an experienced radio/TV technician for help.



This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.



Document Created: 2019-01-28 10:53:23
Document Modified: 2019-01-28 10:53:23

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC