2AANZMODB

FCC ID

Equipment: BT Module

DGL Group LTD. MODB

195 Raritan Center Parkway, Edison, NJ 08837 United States

Application
Frequency Range
Final Action Date
Granted
55N1+P6+zgGTOjr9DngMcQ==
2402.0-2480.0
2019-03-07
APPROVED
0rNn79zoKWK6adUML3+CAg==
2402.0-2480.0
2019-03-07
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2019-03-07 00:00:00 pdf
RF Test set-up photoTest Setup Photos 2019-03-07 00:00:00 pdf
RF Test ReportTest Report 2019-03-07 00:00:00 pdf
RF Exposure ReportRF Exposure Info 2019-03-07 00:00:00 pdf
Internal photosInternal Photos 2019-03-07 00:00:00 pdf
Label and locationID Label/Location Info 2019-03-07 00:00:00 pdf
External photoExternal Photos 2019-03-07 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-03-07 00:00:00 pdf
LTC LetterCover Letter(s) 2019-03-07 00:00:00 pdf
Authorization LetterCover Letter(s) 2019-03-07 00:00:00 pdf
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentBT Module
FRN0022847883
Grantee Code2AANZ
Product CodeMODB
Applicant BusinessDGL Group LTD.
Business Address195 Raritan Center Parkway , Edison,New Jersey United States 08837
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantJosephine Tran –
Applicant Phone
Applicant Fax001-732-692-5000
Applicant Email[email protected]
Applicant MailStop
Test FirmBureau Veritas Shenzhen Co., Ltd. Dongguan Branch
Test Firm ContactAlec Hu
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByJoseohine Tran –
Comment [0rNn79zoKWK6adUML3+CAg==]: RF output power is conducted. Modular approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.
Comment [55N1+P6+zgGTOjr9DngMcQ==]: RF output power is conducted. Modular approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC