RF exposure letter

FCC ID: 2AAMI-T2240

RF Exposure Info

Download: PDF
FCCID_2994513

TÜV Rheinland Nederland B.V. ACB Date 18-05-2016 Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Version: 20101101 To whom it may concern, On behalf of our customer Tacx B.V., we hereby declare the following device: FCC ID : 2AAMI-T2240 Brand : Tacx Model : T2240 Description : Wireless Communication Device The EUT has 2 transmitters (BLE and ANT+) which never send simultaneously. The highest output power is from the BLE part. BLE is a DXX application and no RF exposure assessment is required for the BLE part. The RF exposure assessment is based on the ANT+ mode. The EUT is considered as ‘Mobile’ use. The EUT has a maximum radiated output power in ANT+ mode of -5.46 dBm, equals 0.28 mW in the frequency range of 2402 – 2480 MHz which means that the worst case prediction of power density (100% reflection) at 20 cm distance (worst case) can be calculated as follows : EIRP 2 S= 4 * π * R (power density without reflection) 2 2 * EIRP 2 S= 4 * π * R (power density with 100% reflection) 2 2 * EIRP EIRP (mW) 0.28 2 2 2 2 S= 4 * π * R = π * (20cm) = π * (20) = 0.00022 mW/cm ® TÜV, TUEV and TUV are registered trademarks. Any use or application requires prior approval. 2 2 (limit =10 W/m is 1.0 mW/cm ) For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as this device, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations . The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, For this device this is calculated as: = 0.28mW / 5mm * √2.48 GHz = 0.088 (requirement: ≤ 3.0) SAR Test Exclusion Thresholds is < 10mW and 3.0 for separation distance 5mm. Therefore, SAR test is not required. This means that the equipment is in compliance with EC OET Bulletin 65 (Edition 97-01), Supplement C (Edition 01-01). Eiberkamp 10 P.O. Box 37 9350 AA Leek Fax:+31 594 504804

® TÜV, TUEV and TUV are registered trademarks. Any use or application requires prior approval. Version: 20101101 Best regards, Test Engineer R .van der Meer TÜV Rheinland Nederland B.V. TÜV Rheinland Nederland B.V.


Document Created: 2016-05-18 12:58:01
Document Modified: 2016-05-18 12:58:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC