Test Report

FCC ID: 2AAIL-MM8036D

Test Report

Download: PDF
FCCID_4227395

Uni+nTrust Page 1 of 33 Report No.: 181203008RFC—3 TEST REPORT AmazonBasics Wireless Tweaked Vertical Product Name: Ergonomic Optical Mouse Trade Mark: N/A Model No.: MD8036 HVIN: MD8036 Report Number: 181203008RFC—3 FCC 47 CFR Part 15 Subpart C Test Standards: RSS—Gen Issue 5 RSS—210 Issue 9 FCC ID: 2AAIL—MM8036D IC: 11188A—MM8036D Test Result: PASS Date of Issue: March 13, 2019 Prepared for: DongGuan Mae Tay Electronic Co.,Ltd Beihuanlu Industrial Area Changping Town Dongguan, Guangdong China Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China TEL: +86—755—2823 0888 FAX: +86—755—2823 0886 Tested by: Reviewed by: M Kevin Liang Assistant Manager Approved by: Date: March 13, 2019 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua NewDistrict, Shenzhen, China Tel: +86—755—28230888 Fax: +86—755—28230886 E—mail: info@uttlab.com Hitp:Iwww uttlab.com

Page 2 of 33 Report No.: 181203008RFC-3 Version Version No. Date Description V1.0 March 13, 2019 Original Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 3 of 33 Report No.: 181203008RFC-3 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES.............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 4 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.6 TEST LOCATION ................................................................................................................................................. 5 1.7 TEST FACILITY ................................................................................................................................................... 5 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 5 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 5 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 8 4. TEST CONFIGURATION .......................................................................................................................................... 9 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ........................................................................................................ 9 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................... 9 4.1.2 RECORD OF NORMAL ENVIRONMENT....................................................................................................... 9 4.2 TEST CHANNELS ............................................................................................................................................... 9 4.3 EUT TEST STATUS ............................................................................................................................................ 9 4.4 TEST SETUP .................................................................................................................................................... 10 4.4.1 FOR RADIATED EMISSIONS TEST SETUP................................................................................................. 10 4.4.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 11 4.4.3 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 12 4.5 SYSTEM TEST CONFIGURATION ........................................................................................................................ 12 4.6 DUTY CYCLE ................................................................................................................................................... 13 5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION .................................................................................... 14 5.1 REFERENCE DOCUMENTS FOR TESTING ............................................................................................................ 14 5.2 ANTENNA REQUIREMENT ................................................................................................................................. 14 5.3 RADIATED EMISSION ........................................................................................................................................ 14 5.4 RESTRICTED BANDS AROUND FUNDAMENTAL FREQUENCY ................................................................................. 24 5.5 20DB OCCUPIED BANDWIDTH .......................................................................................................................... 27 5.6 CONDUCTED EMISSION .................................................................................................................................... 30 APPENDIX 1 PHOTOS OF TEST SETUP ..................................................................................................................... 33 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................. 33 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 4 of 33 Report No.: 181203008RFC-3 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: DongGuan Mae Tay Electronic Co.,Ltd Address of Applicant: Beihuanlu Industrial Area Changping Town Dongguan, Guangdong China Manufacturer: DongGuan Mae Tay Electronic Co.,Ltd Address of Manufacturer: Beihuanlu Industrial Area Changping Town Dongguan, Guangdong China 1.2 EUT INFORMATION 1.2.1 General Description of EUT Product Name: AmazonBasics Wireless Tweaked Vertical Ergonomic Optical Mouse Model No.: MD8036 Trade Mark: N/A DUT Stage: Production Unit EUT Supports Function: General 2.4GHz Technique Power Supply: The dongle is supplied power by USB port Sample Received Date: December 4, 2018 Sample Tested Date: December 4, 2018 to December 17, 2018 1.2.2 Description of Accessories None 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD Frequency Band: 2400 MHz to 2483.5 MHz Frequency Range: 2402.85 MHz to 2480.85 MHz Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Type of Modulation: GFSK Number of Channels: 16 Channel Separation: ≥2 MHz Antenna Type: PCB Antenna Antenna Gain: -1.0 dBi Maximum Field Strength: 85.64 dBµV/m Normal Test Voltage: 5.0 Vdc 1.4 OTHER INFORMATION Operation Frequency Each of Channel Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 5 of 33 Report No.: 181203008RFC-3 1.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested with associated equipment below. 1) Support Equipment Description Manufacturer Model No. Serial Number Supplied by Notebook Lenovo E450 SL10G10780 UnionTrust 2) Support Cable Cable No. Description Connector Length Supplied by - - - - - 1.6 TEST LOCATION Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China 518109 Telephone: +86 (0) 755 2823 0888 Fax: +86 (0) 755 2823 0886 1.7 TEST FACILITY The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L9069 The measuring equipment utilized to perform the tests documented in this report has been calibrated once a year or in accordance with the manufacturer's recommendations, and is traceable under the ISO/IEC/EN 17025 to international or national standards. Equipment has been calibrated by accredited calibration laboratories. IC-Registration No.: 21600-1 The 3m Semi-anechoic chamber of Shenzhen UnionTrust Quality and Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 21600-1. A2LA-Lab Certificate No.: 4312.01 Shenzhen UnionTrust Quality and Technology Co., Ltd. has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC Accredited Lab. Designation Number: CN1194 Test Firm Registration Number: 259480 1.8 DEVIATION FROM STANDARDS None. 1.9 ABNORMALITIES FROM STANDARD CONDITIONS None. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 6 of 33 Report No.: 181203008RFC-3 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER None. 1.11 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the Product as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. No. Item Measurement Uncertainty 1 Conducted emission 9KHz-150KHz ±3.8 dB 2 Conducted emission 150KHz-30MHz ±3.4 dB 3 Radiated emission 9KHz-30MHz ±4.9 dB 4 Radiated emission 30MHz-1GHz ±4.7 dB 5 Radiated emission 1GHz-18GHz ±5.1 dB 6 Radiated emission 18GHz-26GHz ±5.2 dB 7 Radiated emission 26GHz-40GHz ±5.2 dB Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 7 of 33 Report No.: 181203008RFC-3 2. TEST SUMMARY FCC 47 CFR Part 15 Subpart C/ RSS-210 Test Cases Test Item Test Requirement Test Method Result FCC 47 CFR Part 15 Subpart C Section Antenna Requirement 15.203 ANSI C63.10-2013 PASS RSS-Gen Issue 5, Section 6.8 FCC 47 CFR Part 15 Subpart C Section Conducted Emission 15.207 ANSI C63.10-2013 PASS RSS-Gen Issue 5, Section 8.8 FCC 47 CFR Part 15 Subpart C Section Radiated Emission 15.249 (a)/15.209 ANSI C63.10-2013 PASS RSS-210 Issue 9 B.10 Restricted bands around FCC 47 CFR Part 15 Subpart C Section fundamental frequency 15.249(a)/15.205 ANSI C63.10-2013 PASS (Radiated Emission) RSS-210 Issue 9 B.10 FCC 47 CFR Part 15 Subpart C Section 20dB Occupied 15.215 (c) ANSI C63.10-2013 PASS Bandwidth RSS-Gen Issue 5, Section 6.7 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 8 of 33 Report No.: 181203008RFC-3 3. EQUIPMENT LIST Radiated Emission Test Equipment List Serial Cal. date Cal. Due date Used Equipment Manufacturer Model No. Number (mm dd, yyyy) (mm dd, yyyy) 3M Chamber & ☒ ETS-LINDGREN 3M N/A Dec. 03, 2018 Dec. 03, 2021 Accessory Equipment ☒ Receiver R&S ESIB26 100114 Nov. 24, 2018 Nov. 24, 2019 ☒ Loop Antenna ETS-LINDGREN 6502 00202525 Dec. 03, 2018 Dec. 03, 2019 ☒ Broadband Antenna ETS-LINDGREN 3142E 00201566 Dec. 08, 2018 Dec. 08, 2019 RA6A5-N- ☒ 6dB Attenuator Talent 18103001 Dec. 08, 2018 Dec. 08, 2019 18 ☒ Preamplifier HP 8447F 2805A02960 Nov. 24, 2018 Nov. 24, 2019 ☒ Horn Antenna ETS-LINDGREN 3117 00164202 Dec. 08, 2018 Dec. 08, 2019 Horn Antenna ☒ ETS-LINDGREN 3117-PA 00201874 May 22, 2018 May 22, 2019 (Pre-amplifier) Multi device ☒ ETS-LINDGREN 7006-001 00160105 N/A N/A Controller Band Rejection Filter ☒ Micro-Tronics BRM50702 G248 Jun. 06, 2018 Jun. 06, 2019 (2400MHz~2500MHz) ☒ Test Software Audix e3 Software Version: 9.160333 Conducted Emission Test Equipment List Serial Cal. date Cal. Due date Used Equipment Manufacturer Model No. Number (mm dd, yyyy) (mm dd, yyyy) 1316.3003K07 ☒ Receiver R&S ESR7 Nov. 24, 2018 Nov. 24, 2019 -101181-K3 ☒ Pulse Limiter R&S ESH3-Z2 0357.8810.54 Nov. 24, 2018 Nov. 24, 2019 ☒ LISN R&S ESH2-Z5 860014/024 Nov. 24, 2018 Nov. 24, 2019 ☒ Test Software Audix e3 Software Version: 9.160323 Conducted RF test Equipment List Serial Cal. date Cal. Due date Used Equipment Manufacturer Model No. Number (mm dd, yyyy) (mm dd, yyyy) EXA Spectrum ☒ KEYSIGHT N9010A MY51440197 Nov. 24, 2018 Nov. 24, 2019 Analyzer Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 9 of 33 Report No.: 181203008RFC-3 4. TEST CONFIGURATION 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING 4.1.1 Normal or Extreme Test Conditions Environment Parameter Selected Values During Tests Ambient Test Condition Temperature (°C) Voltage (Vdc) Relative Humidity (%) NT/NV +15 to +35 5 20 to 75 Remark: 1) NV: Normal Voltage; NT: Normal Temperature 4.1.2 Record of Normal Environment Temperature Relative Humidity Pressure Test Item Tested by (°C) (%) (kPa) Conducted Emission 23.5 53 99.8 Gemini Huang Radiated Emission 25.4 57 99.8 Andy Lin Restricted bands around fundamental frequency 25.4 57 99.8 Andy Lin (Radiated Emission) 20dB Occupied Bandwidth 25.4 57 99.8 Tony Kang 4.2 TEST CHANNELS Type of Modulation Tx/Rx Frequency Test RF Channel Lists 2402.85 MHz Lowest(L) Middle(M) Highest(H) GFSK to Channel 1 Channel 3 Channel 16 2480.85 MHz 2402.85 MHz 2441.85 MHz 2480.85 MHz 4.3 EUT TEST STATUS Modulation Mode Tx Function Description Keep the EUT in continuously transmitting with modulation test GFSK 1Tx single. Power Setting Power Setting: not applicable, test used software default power level. Test Software Test software name: CompxTest_V1.1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 10 of 33 Report No.: 181203008RFC-3 4.4 TEST SETUP 4.4.1 For Radiated Emissions test setup Figure 1. Below 30MHz Figure 2. 30MHz to 1GHz Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 11 of 33 Report No.: 181203008RFC-3 Figure 3. Above 1GHz 4.4.2 For Conducted Emissions test setup Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 12 of 33 Report No.: 181203008RFC-3 4.4.3 For Conducted Emissions test setup 4.5 SYSTEM TEST CONFIGURATION For emissions testing, the equipment under test (EUT) setup to transmit continuously to simplify the measurement methodology. Care was taken to ensure proper power supply voltages during testing. During testing, radiated emission were performed with the EUT set to transmit at the channel with highest output power as worst-case scenario. Only the worst case data were recorded in this test report. The signal is maximized through rotation and placement in the three orthogonal axes. The antenna height and polarization are varied during the search for maximum signal level. The antenna height is varied from 1 to 4 meters. Radiated emissions are taken at three meters unless the signal level is too low for measurement at that distance. If necessary, a pre-amplifier is used and/or the test is conducted at a closer distance. Therefore, all final radiated testing was performed with the EUT in (see table below) orientation. Worst-case axis Frequency Mode Antenna Port positioning Above 1GHz 1TX Chain 0 Z axis All readings are extrapolated back to the equivalent three meter reading using inverse scaling with distance. Analyzer resolution is 100 kHz or greater for frequencies below 1000 MHz. The resolution is 1 MHz or greater for frequencies above 1000 MHz. The spurious emissions more than 20 dB below the permissible value are not reported. Radiated emission measurement were performed from the lowest radio frequency signal generated in the device which is greater than 9 kHz to the tenth harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 13 of 33 Report No.: 181203008RFC-3 4.6 DUTY CYCLE Average Type of On Time Period Duty Cycle Duty Cycle Type of EUT Factor Modulation (msec) (msec) (linear) (%) (dB) Dongle GFSK 0.16 7.52 0.02 2.13 -33.44 Remark: 1) Duty cycle= On Time/ Period; 2) Duty Cycle factor = 10 * log(1/ Duty cycle); 3) Average factor = 20 log10 Duty Cycle. The test plot as follows Dongle Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 14 of 33 Report No.: 181203008RFC-3 5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION 5.1 REFERENCE DOCUMENTS FOR TESTING No. Identity Document Title 1 FCC 47 CFR Part 15 Radio Frequency Devices 2 RSS-210 Issue 9 Licence-Exempt Radio Apparatus: Category I Equipment American National Standard for Testing Unlicesed Wireless 2 ANSI C63.10-2013 Devices 5.2 ANTENNA REQUIREMENT Standard Requirement 15.203 Requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. EUT Antenna: Antenna in the interior of the equipment and no consideration of replacement. The gain of the antenna is -1 dBi. 5.3 RADIATED EMISSION FCC 47 CFR Part 15.209 and 15.249 Test Requirement: RSS-210 Issue 9 B.10 Test Method: ANSI C63.10-2013 Section 6.6.4.3 Receiver Setup: Frequency Detector RBW VBW Remark 0.009 MHz-0.090 MHz Peak 10 kHz 30 KHz Peak 0.009 MHz-0.090 MHz Average 10 kHz 30 KHz Average 0.090 MHz-0.110 MHz Quasi-peak 10 kHz 30 KHz Quasi-peak 0.110 MHz-0.490 MHz Peak 10 kHz 30 KHz Peak 0.110 MHz-0.490 MHz Average 10 kHz 30 KHz Average 0.490 MHz -30 MHz Quasi-peak 10 kHz 30 kHz Quasi-peak 30 MHz-1 GHz Quasi-peak 100 kHz 300 KHz Quasi-peak Peak 1 MHz 3 MHz Peak Above 1 GHz Peak 1 MHz 10 Hz Average Limits: Spurious Emissions Field strength Measurement Frequency Limit (dBµV/m ) Remark (microvolt/meter) distance (m) 0.009 MHz-0.490 MHz 2400/F(kHz) -- -- 300 0.490 MHz-1.705 MHz 24000/F(kHz) -- -- 30 1.705 MHz-30 MHz 30 -- -- 30 30 MHz-88 MHz 100 40.0 Quasi-peak 3 88 MHz-216 MHz 150 43.5 Quasi-peak 3 216 MHz-960 MHz 200 46.0 Quasi-peak 3 960MHz-1GHz 500 54.0 Quasi-peak 3 Above 1 GHz 500 54.0 Average 3 Field strength of the fundamental signal Frequency Limit (dBµV/m @3m) Remark Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 15 of 33 Report No.: 181203008RFC-3 94.0 Average 2400 MHz-2483.5 MHz 114.0 Peak Remark: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000 MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20 dB under any condition of modulation. Test Setup: Refer to section 4.4.1 for details. Test Procedures: 1. From 30 MHz to 1GHz test procedure as below: 1) The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2) The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3) The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4) For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rota table table was turned from 0 degrees to 360 degrees to find the maximum reading. 5) The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6) If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. 2. Above 1GHz test procedure as below: 1) Different between above is the test site, change from Semi- Anechoic Chamber to fully Anechoic Chamber and change form table 0.8 meter to 1.5 meter( Above 18GHz the distance is 1 meter and table is 1.5 meter). 2) Test the EUT in the lowest channel ,middle channel, the Highest channel 3) The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and found the Z axis positioning which it is worse case. 4) Repeat above procedures until all frequencies measured was complete. Equipment Used: Refer to section 3 for details. Test Result: Pass Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 16 of 33 Report No.: 181203008RFC-3 The measurement data as follows: Field Strength of the Fundamental Signal Result (dBuV/m) Limit (dBuV/m) Margin (dB) Remark Antenna Polaxis Pass/Fail Lowest Channel 49.24 94.00 -44.76 Average Horizontal Pass 82.68 114.00 -31.32 Peak Horizontal Pass 47.22 94.00 -46.78 Average Vertical Pass 80.66 114.00 -33.34 Peak Vertical Pass Middle Channel 48.44 94.00 -45.56 Average Horizontal Pass 81.88 114.00 -32.12 Peak Horizontal Pass 48.02 94.00 -45.98 Average Vertical Pass 81.46 114.00 -32.54 Peak Vertical Pass Highest Channel 52.20 94.00 -41.80 Average Horizontal Pass 85.64 114.00 -28.36 Peak Horizontal Pass 48.20 94.00 -45.80 Average Vertical Pass 81.64 114.00 -32.36 Peak Vertical Pass Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 17 of 33 Report No.: 181203008RFC-3 Radiated Emission Test Data (9 KHz ~ 30 MHz): The amplitude of spurious emissions attenuated more than 20 dB below the permissible value is not required to be report. Radiated Emission Test Data (30 MHz ~ 1 GHz): Lowest Channel Horizontal Correction Frequency Reading Result Limit Margin No. factor Remark (MHz) (dBuV/m) (dBuV/m) (dBuV/m) (dB) (dB) 1* 57.265 41.45 -15.62 25.83 40.00 -14.17 Peak 2 166.639 43.45 -11.27 32.18 43.50 -11.32 Peak 3 346.074 40.41 -4.69 35.72 46.00 -10.28 Peak Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 18 of 33 Report No.: 181203008RFC-3 Vertical Correction Frequency Reading Result Limit Margin No. factor Remark (MHz) (dBuV/m) (dBuV/m) (dBuV/m) (dB) (dB) 1 45.733 47.60 -14.06 33.54 40.00 -6.46 Peak 2 57.265 49.21 -15.62 33.59 40.00 -6.41 Peak 3* 189.108 46.40 -10.34 36.06 43.50 -7.44 Peak Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 19 of 33 Report No.: 181203008RFC-3 Middle Channel Horizontal Correction Frequency Reading Result Limit Margin No. factor Remark (MHz) (dBuV/m) (dBuV/m) (dBuV/m) (dB) (dB) 1* 57.265 41.60 -15.62 25.98 40.00 -14.02 Peak 2 185.163 42.61 -10.52 32.09 43.50 -11.41 Peak 3 348.514 40.00 -4.55 35.45 46.00 -10.55 Peak Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 20 of 33 Report No.: 181203008RFC-3 Vertical Correction Frequency Reading Result Limit Margin No. factor Remark (MHz) (dBuV/m) (dBuV/m) (dBuV/m) (dB) (dB) 1 44.154 47.32 -13.37 33.95 40.00 -6.05 Peak 2 57.669 49.17 -15.60 33.57 40.00 -6.43 Peak 3* 189.108 46.60 -10.34 36.26 43.50 -7.24 Peak Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 21 of 33 Report No.: 181203008RFC-3 Highest Channel Horizontal Correction Frequency Reading Result Limit Margin No. factor Remark (MHz) (dBuV/m) (dBuV/m) (dBuV/m) (dB) (dB) 1* 58.898 41.92 -15.55 26.37 40.00 -13.63 Peak 2 163.162 43.71 -11.41 32.30 43.50 -11.20 Peak 3 346.074 40.39 -4.69 35.70 46.00 -10.30 Peak Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 22 of 33 Report No.: 181203008RFC-3 Vertical Correction Frequency Reading Result Limit Margin No. factor Remark (MHz) (dBuV/m) (dBuV/m) (dBuV/m) (dB) (dB) 1 43.538 48.21 -13.11 35.10 40.00 -4.90 Peak 2 57.265 49.70 -15.62 34.08 40.00 -5.92 Peak 3* 168.997 44.13 -11.18 32.95 43.50 -10.55 Peak Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 23 of 33 Report No.: 181203008RFC-3 Radiated Emission Test Data (Above 1GHz): Lowest Channel: Frequency Result Antenna No. Limit (dBuV/m) Margin (dB) Detector (MHz) (dBuV/m) Polaxis 1 4805.70 43.07 74.00 -30.93 Peak Horizontal 2 4805.70 9.63 54.00 -44.37 Average Horizontal 3 7208.55 43.44 74.00 -30.56 Peak Horizontal 4 7208.55 10.00 54.00 -44.00 Average Horizontal 5 4805.70 42.75 74.00 -31.25 Peak Vertical 6 4805.70 9.31 54.00 -44.69 Average Vertical 7 7208.55 43.64 74.00 -30.36 Peak Vertical 8 7208.55 10.20 54.00 -43.80 Average Vertical Middle Channel: Frequency Result Antenna No. Limit (dBuV/m) Margin (dB) Detector (MHz) (dBuV/m) Polaxis 1 4883.70 46.11 74.00 -27.89 Peak Horizontal 2 4883.70 12.67 54.00 -41.33 Average Horizontal 3 7325.55 42.96 74.00 -31.04 Peak Horizontal 4 7325.55 9.52 54.00 -44.48 Average Horizontal 5 4883.70 41.95 74.00 -32.05 Peak Vertical 6 4883.70 8.51 54.00 -45.49 Average Vertical 7 7325.55 42.66 74.00 -31.34 Peak Vertical 8 7325.55 9.22 54.00 -44.78 Average Vertical Highest Channel: Frequency Result Antenna No. Limit (dBuV/m) Margin (dB) Detector (MHz) (dBuV/m) Polaxis 1 4961.70 42.21 74.00 -31.79 Peak Horizontal 2 4961.70 8.77 54.00 -45.23 Average Horizontal 3 7442.55 42.99 74.00 -31.01 Peak Horizontal 4 7442.55 9.55 54.00 -44.45 Average Horizontal 5 4961.70 42.80 74.00 -31.20 Peak Vertical 6 4961.70 9.36 54.00 -44.64 Average Vertical 7 7442.55 43.48 74.00 -30.52 Peak Vertical 8 7442.55 10.04 54.00 -43.96 Average Vertical Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 24 of 33 Report No.: 181203008RFC-3 5.4 RESTRICTED BANDS AROUND FUNDAMENTAL FREQUENCY FCC 47 CFR Part 15.209 and 15.205 Test Requirement: RSS-210 B.10 Test Method: ANSI C63.10-2013 Limits: Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Frequency Limit (dBµV/m @3m) Remark 30 MHz-88 MHz 40.0 Quasi-peak Value 88 MHz-216 MHz 43.5 Quasi-peak Value 216 MHz-960 MHz 46.0 Quasi-peak Value 960 MHz-1 GHz 54.0 Quasi-peak Value 54.0 Average Value Above 1 GHz 74.0 Peak Value Test Setup: Refer to section 4.4.1 for details. Test Procedures: Radiated band edge measurements at 2400 MHz and 2483.5 MHz were made with the unit transmitting in the low end of the channel range and the high end closest to the restricted bands respectively. The emissions were made on the 966 Semi-Chamber. Use (resolution bandwidth (RBW) = 1 MHz, video bandwidth (VBW) = 3 MHz for peak levels and RBW = 1 MHz and VBW = 10 Hz or 1/T for average levels). 1. Use radiated spurious emission test procedure described in clause 5.3. The transmitter output (antenna port) was connected to the test receiver. 2. Set the PK and AV limit line. 3. Record the fundamental emission and emissions out of the band-edge. 4. Determine band-edge compliance as required. Equipment Used: Refer to section 3 for details. Test Result: Pass The measurement data as follows: Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 25 of 33 Report No.: 181203008RFC-3 Test Channel: Lowest Channel Ant. Polar. : Horizontal Frequency Peak level Peak Limit AV level AV Limit Conclusion (MHz) (dBuv/m) (dBuv/m) (dBuv/m) (dBuv/m) 2400.000 60.45 74 27.01 54 Pass Test Channel: Lowest Channel Ant. Polar. : Vertical Frequency Peak level Peak Limit AV level AV Limit Conclusion (MHz) (dBuv/m) (dBuv/m) (dBuv/m) (dBuv/m) 2399.6990 57.69 74 24.25 54 Pass 2400.0000 54.59 74 31.15 54 Pass Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 26 of 33 Report No.: 181203008RFC-3 Test Channel: Highest Channel Ant. Polar. : Horizontal Frequency Peak level Peak Limit AV level AV Limit Conclusion (MHz) (dBuv/m) (dBuv/m) (dBuv/m) (dBuv/m) 2483.500 64.79 74 31.35 54 Pass Test Channel: Highest Channel Ant. Polar. : Vertical Frequency Peak level Peak Limit AV level AV Limit Conclusion (MHz) (dBuv/m) (dBuv/m) (dBuv/m) (dBuv/m) 2483.500 62.48 74 29.04 54 Pass Remark: Average result = Peak result + Average Factor Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 27 of 33 Report No.: 181203008RFC-3 5.5 20DB OCCUPIED BANDWIDTH FCC 47 CFR Part 15.215 Test Requirement: RSS-Gen Issue 5 Section 6.7 Test Method: ANSI C63.10-2013 Test Setup: Refer to section 4.4.3 for details. Limits: N/A Equipment Used: Refer to section 3 for details. Test Result: Pass The measurement procedure shall be as follows: Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. Use the following spectrum analyzer settings: a) Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a hopping channel b) RBW ≥ 1% of the 20 dB bandwidth c) VBW ≥ RBW d) Sweep = auto; e) Detector function = peak f) Trace = max hold g) All the trace to stabilize, use the marker-to-peak function to set the marker to the peak of the emission, use the marker-delta function to measure and record the 20dB down bandwidth of the emission. Note: The cable loss and attenuator loss were offset into measure device as an amplitude offset. Test Result: Pass The measurement data as follows: Dongle Test Channel 20 dB Bandwidth (MHz) Lowest 2.130 Middle 2.146 Highest 2.147 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 28 of 33 Report No.: 181203008RFC-3 The test plot as follows: Lowest Channel Middle Channel Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 29 of 33 Report No.: 181203008RFC-3 Highest Channel Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 30 of 33 Report No.: 181203008RFC-3 5.6 CONDUCTED EMISSION FCC 47 CFR Part 15.207 Test Requirement: RSS-Gen Section 8.8 Test Method: ANSI C63.10-2013 Section 6.2 Limits: Frequency range Limits (dB(μV) (MHz) Quasi-peak Average 0,15 to 0,50 66 to 56 56 to 46 0,50 to 5 56 46 5 to 30 60 50 Remark: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50 MHz. Test Setup: Refer to section 4.4.2 for details. Test Procedures: 1) The Product was placed on a nonconductive table 0.8 m above the horizontal ground reference plane, and 0.4 m from the vertical ground reference plane, and connected to the main through Line Impedance Stability Network (L.I.S.N). 2) The RBW of the receiver was set at 9 kHz in 150 kHz ~ 30MHz with Peak and AVG detector in Max Hold mode. Run the receiver’s pre-scan to record the maximum disturbance generated from Product in all power lines in the full band. 3) For each frequency whose maximum record was higher or close to limit, measure its QP and AVG values and record. Equipment Used: Refer to section 3 for details. Test Result: Pass Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 31 of 33 Report No.: 181203008RFC-3 The measurement data as follows: Quasi Peak and Average: Mode: RF Link Live Line Correction Frequency Reading Result Limit Margin No. factor Remark (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 1 0.166 27.69 9.80 37.49 55.16 -17.67 Average 2 0.166 35.66 9.80 45.46 65.16 -19.70 QP 3 1.914 11.07 9.72 20.79 46.00 -25.21 Average 4 1.914 26.03 9.72 35.75 56.00 -20.25 QP 5* 6.654 10.94 9.44 20.38 50.00 -29.62 Average 6 6.654 28.92 9.44 38.36 60.00 -21.64 QP Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 32 of 33 Report No.: 181203008RFC-3 Neutral Line Correction Frequency Reading Result Limit Margin No. factor Remark (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 1 0.158 21.87 10.21 32.08 55.57 -23.49 Average 2 0.158 32.86 10.21 43.07 65.57 -22.50 QP 3* 6.654 6.49 10.79 17.28 50.00 -32.72 Average 4 6.654 24.47 10.79 35.26 60.00 -24.74 QP 5 27.764 7.88 12.51 20.39 50.00 -29.61 Average 6 27.764 18.87 12.51 31.38 60.00 -28.62 QP Remark: 1. An initial pre-scan was performed on the Phase and neutral lines with peak detector. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission were detected. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 33 of 33 Report No.: 181203008RFC-3 APPENDIX 1 PHOTOS OF TEST SETUP See test photos attached in Appendix 1 for the actual connections between Product and support equipment. APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS Refer to Appendix 2 for EUT external and internal photos. *** End of Report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of UnionTrust, this report can’t be reproduced except in full. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com


Document Created: 2019-04-04 10:50:57
Document Modified: 2019-04-04 10:50:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC