Test Report

FCC ID: 2AAIL-MM008

Test Report

Download: PDF
FCCID_4386880

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Report Template Version: V03 Website: www.cqa-cert.com Report Template Revision Date: Mar.1st, 2017 Test Report 1 Cover page Report No. : CQAS20190700610E-01 Applicant: DongGuan Mae Tay Electronic Co.,Ltd Address of Applicant: Beihuanlu Industrial Area, Changping Town Dongguan, Guangdong, China Manufacturer: DongGuan Mae Tay Electronic Co.,Ltd Address of Beihuanlu Industrial Area, Changping Town Dongguan, Guangdong, China Manufacturer: Equipment Under Test (EUT): Product: Wireless Verticle Ergonamic Mouse Model No.: NS-PWME20 Brand Name: N/A FCC ID: 2AAIL-MM008 IC : 11188A-MM008 Standards: 47 CFR Part 15, Subpart C RSS-210 Issue 9 August 2016 RSS-Gen Issue 5 March 2019 Date of Test: 2019-07-18 to 2019-07-22 Date of Issue: 2019-07-22 Test Result : PASS* Tested By： (Tom Chen) Reviewed By: (Aaron Ma) Approved By: ( Jack Ai) * In the configuration tested, the EUT complied w ith the standards specified above. The test report is effective only w ith both signature and specialized stamp, The result(s) show n in this report refer only to the sample(s) tested. Without w ritten approval of CQA, this report can’t be reproduced except in full.

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 2 Version Revision History Of Report Report No. Version Description Issue Date CQAS20190700610E-01 Rev.01 Initial report 2019-07-22 Page:2 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 3 Test Summary FCC Test Test Item IC Test Requirement Test method Result Requirement 47 CFR Part 15, Antenna Requirement Subpart C Section RSS-Gen Section 6.8 ANSI C63.10-2013 PASS 15.203 AC Power Line 47 CFR Part 15, Subpart C Section RSS-Gen Section 8.8 ANSI C63.10-2013 N/A Conducted Emission 15.207 47 CFR Part 15, RSS-Gen section Field Strength of the Subpart C Section RSS 210 B 10(a) 6.12 & PASS Fundamental Signal 15.249 (a) ANSI C63.10-2013 47 CFR Part 15, RSS-Gen section Spurious Emissions Subpart C Section RSS 210 B 10 (b) 6.13 & PASS 15.249(a) ANSI C63.10-2013 RSS-Gen section Restricted bands 47 CFR Part 15, 6.13 & around fundamental Subpart C Section RSS 210 B 10 (b) PASS frequency 15.249 (d), (e)/15.209 ANSI C63.10- 2013 47 CFR Part 15, RSS-Gen section 20dB Occupied Subpart C Section RSS-Gen section 6.7 6.7 & PASS Bandwidth 15.215 (c) ANSI C63.10-2013 99% Occupied RSS-Gen section / RSS-Gen section 6.7 PASS Bandwidth 6.7 N/A: Not applicable, This EUT is battery power Page:3 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 4 Contents Page 1 COVER PAGE...................................................................................................................................................................1 2 VERSION ..........................................................................................................................................................................2 3 TEST SUMMARY ...........................................................................................................................................................3 4 CONTENTS ......................................................................................................................................................................4 5 GENERAL INFORMATION .........................................................................................................................................5 5.1 CLIENT INFORMAT ION ............................................................................................................................................... 5 5.2 GENERAL DESCRIPT ION OF EUT............................................................................................................................... 5 5.3 TEST ENVIRONMENT AND M ODE ............................................................................................................................. 7 5.4 DESCRIPT ION OF SUPPORT UNIT S ........................................................................................................................... 7 5.5 ST AT EMENT OF T HE MEASUREMENT UNCERT AINT Y ......................................................................................... 8 5.6 TEST LOCAT ION........................................................................................................................................................... 9 5.7 TEST FACILIT Y ............................................................................................................................................................ 9 5.8 DEVIAT ION FROM ST ANDARDS................................................................................................................................. 9 5.9 A BNORMALIT IES FROM ST ANDARD CONDIT IONS ................................................................................................ 9 5.10 OT HER INFORMAT ION REQUEST ED BY T HE CUST OMER ................................................................................ 9 5.11 EQUIPMENT LIST .................................................................................................................................................. 10 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 11 6.1 A NT ENNA REQUIREMENT ....................................................................................................................................... 11 6.2 RADIAT ED SPURIOUS EMISSION & FIELD ST RENGT H OF FUNDAMENT AL ...................................................... 12 6.3 REST RICT ED BANDS AROUND FUNDAMENT AL FREQUENCY ............................................................................. 21 6.4 20DB BANDWIDT H .................................................................................................................................................... 27 6.5 99% OCCUPY BANDWIDT H...................................................................................................................................... 30 7 PHOTOGRAPHS......................................................................................................................................................... 33 7.1 RADIAT ED EMISSION TEST SET UP ......................................................................................................................... 33 7.2 EUT CONST RUCT IONAL DET AILS .......................................................................................................................... 34 Page:4 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 5 General Information 5.1 Client Information Applicant: DongGuan Mae Tay Electronic Co.,Ltd Address of Applicant: Beihuanlu Industrial Area, Changping Town Dongguan, Guangdong, China Manufacturer: DongGuan Mae Tay Electronic Co.,Ltd Address of Beihuanlu Industrial Area, Changping Town Dongguan, Guangdong, Manufacturer: China 5.2 General Description of EUT Name: Wireless Verticle Ergonamic Mouse Model No.: NS-PWME20 Trade Mark : N/A Hardware Version: Ver.02 Software Version: Ver.02 Frequency Range: 2408MHz ~ 2474MHz Modulation Type: FSK Number of Channels: 34 (declared by the client) Sample Type: Portable product Antenna Type: PCB antenna Antenna Gain: -1.0dBi Power Supply: DC3.0V (AAA battery x 2) Page:5 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Operation Frequency each of channel Channel Frequency Channel Frequency Channel Frequency Channel Frequency 1 2408MHz 10 2426MHz 19 2444MHz 28 2462MHz 2 2410MHz 11 2428MHz 20 2446MHz 29 2464MHz 3 2412MHz 12 2430MHz 21 2448MHz 30 2466MHz 4 2414MHz 13 2432MHz 22 2450MHz 31 2468MHz 5 2416MHz 14 2434MHz 23 2452MHz 32 2470MHz 6 2418MHz 15 2436MHz 24 2454MHz 33 2472MHz 7 2420MHz 16 2438MHz 25 2456MHz 34 2474MHz 8 2422MHz 17 2440MHz 26 2458MHz / / 9 2424MHz 18 2442MHz 27 2460MHz / / Note: In section 15.31(m), regards to the operating frequency range over 10 MHz, the Lowest frequency, the middle frequency, and the highest frequency of channel were selected to perform the test, and the selected channel see below: Channel Frequency The Lowest channel(CH1) 2408MHz The Middle channel(CH17) 2440MHz The Highest channel(CH34) 2474MHz Page:6 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 5.3 Test Environment and Mode Operating Environment: Temperature: 25.0 C Humidity: 52 % RH Atmospheric Pressure: 1001 mbar Test Mode: Use test software (RF test) to set the lowest frequency, the middle frequency and the highest frequency keep transmitting of the EUT. 5.4 Description of Support Units The EUT has been tested with associated equipment below. FCC Description Manufacturer Model No. Remark certification / / / / / Page:7 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 5.5 Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 „Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements“ and is documented in the Shenzhen Huaxia Testing Technology Co., Ltd quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for CQA laboratory is reported: No. Item Uncertainty Notes 1 Radiated Emission (Below 1GHz) 5.12dB (1) 2 Radiated Emission (Above 1GHz) 4.60dB (1) 3 Conducted Disturbance 3.34dB (1) (0.15~30MHz) 4 Radio Frequency 3×10-8 (1) 5 Duty cycle 0.6 %. (1) 6 Occupied Bandwidth 1.1% (1) 7 RF conducted power 0.86dB (1) 8 RF power density 0.74 (1) 9 Conducted Spurious emissions 0.86dB (1) 10 Temperature test 0.8℃ (1) 11 Humidity test 2.0% (1) 12 Supply voltages 0.5 %. (1) 13 time 0.6 %. (1) 14 Frequency Error 5.5 Hz (1) (1)This uncertainty represents an expanded uncertainty expressed at approximatel y the 95% confidence level using a coverage factor of k=2. Page:8 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 5.6 Test Location All tests were performed at: Shenzhen Huaxia Testing Technology Co., Ltd., 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China 5.7 Test Facility • ISED No.: 22984 Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory is recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements • A2LA (Certificate No. 4742.01) Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 4742.01. • FCC Registration No.: 522263 Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.:522263 5.8 Deviation from Standards None. 5.9 Abnormalities from Standard Conditions None. 5.10 Other Information Requested by the Customer None. Page:9 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 5.11 Equipment List Instrument Calibration Calibration Test Equipment Manufacturer Model No. No. Date Due Date EMI Test Receiver R&S ESR7 CQA-005 2018/9/26 2019/9/25 Spectrum analyzer R&S FSU26 CQA-038 2018/10/28 2019/10/27 AFS4-00010300-18- 2018/9/26 2019/9/25 Preamplifier MITEQ 10P-4 CQA-035 AMF-6D-02001800-29- 2018/11/2 2019/11/1 Preamplifier MITEQ 20P CQA-036 Loop antenna Schwarzbeck FMZB1516 CQA-060 2018/10/28 2020/10/27 Bilog Antenna R&S HL562 CQA-011 2018/9/26 2020/9/25 Horn Antenna R&S HF906 CQA-012 2018/9/26 2020/9/25 Horn Antenna Schwarzbeck BBHA 9170 CQA-088 2018/9/26 2020/9/25 Coaxial Cable (Above 1GHz) CQA N/A C019 2018/9/26 2019/9/25 Coaxial Cable (Below 1GHz) CQA N/A C020 2018/9/26 2019/9/25 Antenna Connector CQA RFC-01 CQA-080 2018/9/26 2019/9/25 RF cable(9KHz~40GHz) CQA RF-01 CQA-079 2018/9/26 2019/9/25 PWD-2533-02-SMA- Power divider MIDWEST 79 CQA-067 2018/9/26 2019/9/25 Note: The temporary antenna connector is soldered on the PCB board in order to perform conducted tests and this temporary antenna connector is listed in the equipment list. Page:10 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 6 Test results and Measurement Data 6.1 Antenna Requirement Standard requirement: 47 CFR Part 15C Section 15.203; RSS-Gen Section 6.8 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. EUT Antenna: The antenna is integrated on the main PCB and no consideration of replacement. The best case gain of the antenna is -1.0dBi. Page:11 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 6.2 Radiated Spurious Emission & Field strength of fundamental Test Requirement: 47 CFR Part 15C Section 15.249 (a), (d), (e) and 15.209 RSS 210 B 10 (a) Test Method: ANSI C63.10 & RSS-Gen section 6.12/6.13 Test Site: Measurement Distance: 3m (Semi-Anechoic Chamber) Receiver Setup: Frequency Detector RBW VBW Remark 0.009MHz-0.090MHz Peak 10kHz 30KHz Peak 0.009MHz-0.090MHz Average 10kHz 30KHz Average 0.090MHz-0.110MHz Quasi-peak 10kHz 30KHz Quasi-peak 0.110MHz-0.490MHz Peak 10kHz 30KHz Peak 0.110MHz-0.490MHz Average 10kHz 30KHz Average 0.490MHz -30MHz Quasi-peak 10kHz 30kHz Quasi-peak 30MHz-1GHz Quasi-peak 100 kHz 300KHz Quasi-peak Peak 1MHz 3MHz Peak Above 1GHz Peak 1MHz 10Hz Average Note: For fundamental frequency, RBW=5MHz, VBW=5MHz, Peak detector is for PK value, RMS detector is for Average value. Limit: Field strength Measuremen Limit t (Spurious Emissions Frequency (microvolt/meter Remark (dBuV/m ) and band edge) ) distance (m) 0.009MHz- 2400/F(kHz) - - 300 0.490MHz 0.490MHz- 24000/F(kHz) - - 30 1.705MHz 1.705MHz-30MHz 30 - - 30 30MHz-88MHz 100 40.0 Quasi-peak 3 88MHz-216MHz 150 43.5 Quasi-peak 3 216MHz-960MHz 200 46.0 Quasi-peak 3 960MHz-1GHz 500 54.0 Quasi-peak 3 Above 1GHz 500 54.0 Average 3 Note: 1) 15.35(b), Unless otherwise specified, the limit on peak radio frequency emissions is 20dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device. 2) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the Page:12 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Limit: Frequency Limit (dBuV/m @3m) Remark (Field strength of the 94.0 Average Value 2400MHz-2483.5MHz fundamental signal) 114.0 Peak Value Page:13 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Test Setup: Figure 1. Below 30MHz 150cm Figure 2. 30MHz to 1GHz Figure 3. Above 1 GHz Test Procedure: a. 1) Below 1G: The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2) Above 1G: The EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. Note: For the radiated emission test above 1GHz: Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical Page:14 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. g. Test the EUT in the lowest channel,the middle channel,the Highest channel h. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode,And found the X axis positioning which it is worse case. i. Repeat above procedures until all frequencies measured was complete. Exploratory Test Transmitting with FSK at lowest, middle and highest channel. Mode: Final Test Mode: Pretest the EUT at Transmitting mode, For below 1GHz part, through pre-scan, the worst case is the highest channel. Only the worst case is recorded in the report. Test Voltage: DC3.0V Test Results: Pass Page:15 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Measurement Data Field Strength Of The Fundamental Signal Meter Emission Ant. Pol. Frequency Reading Factor Level Limits Over Detector (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) Type H/V 2408 97.28 -9.02 88.26 114 -25.74 Peak H 2408 95.73 -9.02 86.71 94 -7.29 AVG H 2408 94.28 -9.02 85.26 114 -28.74 Peak V 2408 92.75 -9.02 83.73 94 -10.27 AVG V 2440 99.90 -8.96 90.94 114 -23.06 Peak H 2440 98.41 -8.96 89.45 94 -4.55 AVG H 2440 95.78 -8.96 86.82 114 -27.18 Peak V 2440 94.23 -8.96 85.27 94 -8.73 AVG V 2474 101.86 -8.74 93.12 114 -20.88 Peak H 2474 100.34 -8.74 91.60 94 -2.40 AVG H 2474 97.26 -8.74 88.52 114 -25.48 Peak V 2474 95.82 -8.74 87.08 94 -6.92 AVG V Page:16 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Spurious Emissions 30MHz~1GHz (the worst case) Test mode: Transmitting (Highest channel) Vertical Page:17 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 30MHz~1GHz (the worst case) Test mode: Transmitting (Highest channel) Horizontal Page:18 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Above 1GHz Test mode: Transmitting Test channel: Lowest Meter Emission Ant. Pol. Frequency Reading Factor Level Limits Over Detector (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) Type H/V 4816 56.26 -1.24 55.02 74 -18.98 Peak H 4816 41.85 -1.24 40.61 54 -13.39 AVG H 7224 47.33 5.98 53.31 74 -20.69 Peak H 7224 36.01 5.98 41.99 54 -12.01 AVG H 4816 51.43 -1.24 50.19 74 -23.81 peak V 4816 37.2 -1.24 35.96 54 -18.04 AVG V 7224 47.5 5.98 53.48 74 -20.52 peak V 7224 36.64 5.98 42.62 54 -11.38 AVG V Test mode: Transmitting Test channel: Middle Meter Emission Ant. Pol. Frequency Reading Factor Level Limits Over Detector (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) Type H/V 4880 56.19 -0.82 55.37 74 -18.63 peak H 4880 42.3 -0.82 41.48 54 -12.52 AVG H 7320 47.83 5.91 53.74 74 -20.26 peak H 7320 36.64 5.91 42.55 54 -11.45 AVG H 4880 51.13 -0.82 50.31 74 -23.69 peak V 4880 37.88 -0.82 37.06 54 -16.94 AVG V 7320 47.88 5.91 53.79 74 -20.21 peak V 7320 36.18 5.91 42.09 54 -11.91 AVG V Test mode: Transmitting Test channel: Highest Meter Emission Ant. Pol. Frequency Reading Factor Level Limits Over Detector (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) Type H/V 4948 55.99 -0.49 55.50 74 -18.50 peak H 4948 41.29 -0.49 40.80 54 -13.20 AVG H 7422 47.44 5.74 53.18 74 -20.82 peak H 7422 36.3 5.74 42.04 54 -11.96 AVG H 4948 50.38 -0.49 49.89 74 -24.11 peak V 4948 37.03 -0.49 36.54 54 -17.46 AVG V 7422 47.26 5.74 53.00 74 -21.00 peak V 7422 36.62 5.74 42.36 54 -11.64 AVG V Page:19 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Remark: 1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows: Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor 2) Scan from 9kHz to 25GHz,The disturbance above 8GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. The amplitude of spurious emissions from the radiator which are attenuated more than 20dB below the limit need not be reported . Page:20 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 6.3 Restricted bands around fundamental frequency Test Requirement: 47 CFR Part 15C Section 15.249 (d), 15.209 and 15.205; RSS 210 B 10 (b) Test Method: ANSI C63.10 :2013 & RSS-Gen section 6.13 Test Site: Measurement Distance: 3m (Semi-Anechoic Chamber) Emissions radiated outside of the specified frequency bands, except for Limit(Band Edge): harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Frequency Limit (dBµV/m @3m) Remark Quasi-peak 30MHz-88MHz 40.0 Value Quasi-peak 88MHz-216MHz 43.5 Value Quasi-peak 216MHz-960MHz 46.0 Value Quasi-peak 960MHz-1GHz 54.0 Value 54.0 Average Value Above 1GHz 74.0 Peak Value Test Setup: Figure 1. 30MHz to 1GHz Figure 2. Above 1 GHz Below 1GHz test procedure as below: Test Procedure: j. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. k. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. l. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. m. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the Page:21 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 maximum reading. n. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. o. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. Above 1GHz test procedure as below: p. Different between above is the test site, change from Semi - Anechoic Chamber to fully Anechoic Chamber and change form table 0.8 metre to 1.5 metre( Above 18GHz the distance is 1 meter and table is 1.5 metre). q. Test the EUT in the lowest channel , the Highest channel r. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and found the X axis positioning which it is worse case. s. Repeat above procedures until all frequencies measured was complete. Test Mode: Transmitting with FSK at lowest, middle and highest channel. Test Voltage: DC3.0V Test Results: Pass Test plot as follows: Test mode: Transmitting Test channel: Lowest Remark: Vertical Page:22 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Page:23 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Test mode: Transmitting Test channel: Lowest Remark: Horizontal Page:24 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Test mode: Transmitting Test channel: Highest Remark: Vertical Page:25 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Test mode: Transmitting Test channel: Highest Remark: Horizontal Remark: The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows: Final Test Level =Receiver Reading - Correct Factor Correct Factor = Preamplifier Factor– Antenna Factor–Cable Factor Page:26 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 6.4 20dB Bandwidth Test Requirement: 47 CFR Part 15C Section 15.215 RSS-Gen Section 6.7 Test Method: ANSI C63.10:2013 & RSS-Gen Section 6.7 Test Setup: Test Mode: Transmitting with FSK at lowest, middle and highest channel. Limit: N/A Test Results: Pass Measurement Data Test channel 20dB bandwidth (MHz) Results Lowest 2.229 Pass Middle 2.243 Pass Highest 2.287 Pass Page:27 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Test plot as follows: Test channel: Lowest Page:28 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Test channel: Middle Test channel: Highest Page:29 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 6.5 99% Occupy Bandwidth Test Requirement: RSS-Gen Section 6.7 Test Method: RSS-Gen Section 6.7 Test Setup: Test Mode: Transmitting with FSK at lowest, middle and highest channel. Limit: N/A Test Results: Pass Measurement Data Test channel 99% Occupy Bandwidth (MHz) Results Lowest 2.199710564 Pass Middle 2.185238784 Pass Highest 2.185238784 Pass Page:30 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Test plot as follows: Test channel: Lowest Page:31 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 Test channel: Middle Test channel: Highest Page:32 of 34

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700610E-01 7.2 EUT Constructional Details END OF THE REPORT Page:34 of 34


Document Created: 2019-07-24 14:06:19
Document Modified: 2019-07-24 14:06:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC