RF Exposure Info

FCC ID: 2AAIL-DG008

RF Exposure Info

Download: PDF
FCCID_4386979

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Report Template Version: V03 Website: www.cqa-cert.com Report Template Revision Date: Mar.1st, 2017 RF Exposure Evaluation Report Report No. : CQAS20190700608E-02 Applicant: DongGuan Mae Tay Electronic Co.,Ltd Address of Applicant: Beihuanlu Industrial Area, Changping Town Dongguan, Guangdong, China Manufacturer: DongGuan Mae Tay Electronic Co.,Ltd Address of Beihuanlu Industrial Area, Changping Town Dongguan, Guangdong, China Manufacturer: Equipment Under Test (EUT): Product: USB Dongle Model No.: MM-008 Brand Name: N/A FCC ID: 2AAIL-DG008 IC : 11188A-DG008 Standards: 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 RSS-102 Issue 5 March 2015 Date of Test: 2019-07-18 to 2019-07-22 Date of Issue: 2019-07-22 Test Result : PASS* Tested By： (Tom Chen) Reviewed By: (Aaron Ma) Approved By: ( Jack Ai) * In the configuration tested, the EUT complied w ith the standards specified above. The test report is effective only w ith both signature and specialized stamp, The result(s) show n in this report refer only to the sample(s) tested. Without w ritten approval of CQA, this report can’t be reproduced except in full.

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700608E-02 1 Version Revision History Of Report Report No. Version Description Issue Date CQAS20190700608E-02 Rev.01 Initial report 2019-07-22 Page:2 of 8

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700608E-02 2 Contents Page 1 VERSION ............................................................................................................................................................................ 2 2 CONTENTS ........................................................................................................................................................................ 3 3 GENERAL INFORMATION ........................................................................................................................................... 4 3.1 CLIENT INFORMAT ION ..................................................................................................................................................4 3.2 GENERAL DESCRIPT ION OF EUT..................................................................................................................................4 4 SAR EVALUATION ......................................................................................................................................................... 5 4.1 FCC RF EXPOSURE COMPLIANCE REQUIREMENT ....................................................................................................5 4.1.1 Standard Requirement ..................................................................................................................................... 5 4.1.2 Limits..................................................................................................................................................................... 5 4.1.3 EUT RF Exposure ............................................................................................................................................. 6 4.2 IC RF EXPOSURE COMPLIANCE REQUIREMENT .......................................................................................................7 4.2.1 Standard Requirement ..................................................................................................................................... 7 4.2.2 Limits..................................................................................................................................................................... 7 4.2.3 EUT RF Exposure ............................................................................................................................................. 8 Page:3 of 8

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700608E-02 3 General Information 3.1 Client Information Applicant: DongGuan Mae Tay Electronic Co.,Ltd Address of Applicant: Beihuanlu Industrial Area, Changping Town Dongguan, Guangdong, China Manufacturer: DongGuan Mae Tay Electronic Co.,Ltd Address of Manufacturer: Beihuanlu Industrial Area, Changping Town Dongguan, Guangdong, China 3.2 General Description of EUT Name: USB Dongle Model No.: MM-008 Trade Mark : N/A Hardware Version: Ver. 02 Software Version: Ver. 02 Frequency Range: 2408MHz ~ 2474MHz Modulation Type: FSK Number of Channels: 34 (declared by the client) Sample Type: Portable product Antenna Type: PCB antenna Antenna Gain: -1.0dBi Power Supply: DC5.0V from PC Page:4 of 8

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700608E-02 4 SAR Evaluation 4.1 FCC RF Exposure Compliance Requirement 4.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 4.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion Page:5 of 8

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700608E-02 4.1.3 EUT RF Exposure The worst case (refer to report CQASZ20190700608E-01) is below: Antenna polarization: Horizontal Max. tunp-up Frequency (MHz) Level (dBμV/m) Cal. (dBm) Value power (dBm) 2408 86.20 -9.03 Peak -5 For 2408MHz SAR Test Exclustion Thresholds is 10mW (10dBm) So the SAR test is not required. Page:6 of 8

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700608E-02 4.2 IC RF Exposure Compliance Requirement 4.2.1 Standard Requirement According to RSS-102 Issue 5 March 2015 2.5.1 Exemption Limits for Routine Evaluation – SAR Evaluation SAR evaluation is required if the separation distance between the user and/or bystander and the antenna and/or radiating element of the device is less than or equal to 20 cm, except when the device operates at or below the applicable output power level (adjusted for tune-up tolerance) for the specified separation distance defined in Table 1. 4.2.2 Limits Remakr: If the operating frequency of the device is between two frequencies located in Table 1, linear interpolation shall be applied for the applicable separation distance. For test separation distance less than 5 mm, the exemption limits for a separation distance of 5 mm can be applied to determine if a routine evaluation is required. Page:7 of 8

Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQAS20190700608E-02 4.2.3 EUT RF Exposure Measurement Data The worst case (refer to report CQASZ20190700608E-01) is below: Antenna polarization: Horizontal Max. tunp-up Frequency (MHz) Level (dBμV/m) Cal. (dBm) Value power (dBm) 2408 86.20 -9.03 Peak -5 For 2408MHz SAR Test Exclustion Thresholds is 4mW (6dBm) So the SAR test is not required. Page:8 of 8


Document Created: 2019-08-05 14:43:36
Document Modified: 2019-08-05 14:43:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC