WLAN 5GHz DTS-UNII Declaration letter

FCC ID: 2AAED-R9861500D01

Cover Letter(s)

Download: PDF
FCCID_4468757

Date: September 10 2019 DTS-UNII Device Declaration Letter To whom it may concern, we declare below featured for equipment authorization regarding FCC ID: 2AAED-R9861500D01 IC Certification number: 9393B-R9861500D01 (1) DFS Device -- D Master , D Client with Radar detection capability, [gl Client without radar detection capability, D N/A (2) Active/ Passive Scanning Frequency Band Active Scanning passive scanning (MHz) (the device can (where the Ad Hoc Mode or Access point transmit a probe device is can WIFI Direct capability (beacon)) listen only with capability no probes) 2412 - 2462MHz [gl Yes, D No [gl Yes, D No D Yes, [gl No D Yes, [gl No 5150 - 5250MHz [gl Yes, D No [gl Yes, D No D Yes, [gl No D Yes, [gl No 5250 - 5350MHz [gl Yes, D No [gl Yes, D No D Yes, [gl No D Yes, [gl No 5470 - 5725MHz [gl Yes, D No [gl Yes, D No D Yes, [gl No D Yes, [gl No 5725 - 5850MHz [gl Yes, D No [gl Yes, D No D Yes, [gi No D Yes, [gl No (3) Country code selection ability - D Yes, [gl No If yes, pis explain how it was implemented : (pis also help to provide detail of options for each country selection) (4) Meet 15.202 requirement - [gl Yes, D No , pis check below : DA master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. ln this mode it is able to select a channel and initiate a network by sending enabling signals to other devices [giA client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network ... (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. [giApply, "Yes, please see SW security Description". D No Apply, (If apply, pis help to provide explanation on it was implement , and how software was controlled) (6) The justification of how device was restricted to operate in 5600-5650MHz. This device operates as a client without radar detection capability and will be programmed at the factory to passively scan on the following dynamic frequency selection (DFS) channels and will only listen for a master device and cannot sent a probe request to initiate communication on these DFS channels. Barco nv I Beneluxpark 21 I B-8500 Kortrijk I Belgium ENABLING BRIGHT OUTCOMES BARC-& Registered office: President Kennedypark 35 I B-8500 Kortrijk I Belgium IBAN BE49 3850 5234 2071 BBRUBEBB I VAT BE 0473.191.041 I RPR Gent, Section Kortrijk www.barco.com

Signature: Name (Printed): i e Bruyne 1 Title: VP Meeting xperience On behalf of Company: Barco NV Telephone: +32 56 23 3283 Address: President Kennedypark 35 Kortrijk 8500 Belgium Barco nv I Beneluxpark 21 I B-8500 Kortrijk I Belgium ENABLING BRIGHT OUTCOMES BARC-0- Registered office: President Kennedypark 35 I B-8500 Kortrijk I Belgium IBAN BE49 3850 5234 2071 BBRUBEBB I VAT BE 0473.191.041 I RPR Gent. Section Kortrijk www.barco.com


Document Created: 2019-09-17 17:40:02
Document Modified: 2019-09-17 17:40:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC