Test Report

FCC ID: 2AABK-TM800W630L

Test Report

Download: PDF
FCCID_3366889

REPORT No.：SZ16120122E01 FCC TEST REPORT APPLICANT : Shenzhen Chuangwei Electronic Appliance Tech Co., Ltd. PRODUCT NAME : Tablet PC MODEL NAME : TM800W630L, CT811, H811 TRADE NAME : Nuvision, Tmax BRAND NAME : Nuvision FCC ID : 2AABK-TM800W630L STANDARD(S) : 47 CFR Part 15 Subpart B TEST DATE : 2017-03-20 to 2017-03-29 ISSUE DATE : 2017-03-30 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn

REPORT No.：SZ16120122E01 DIRECTORY 1. TECHNICAL INFORMATION∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙5 1.1. APPLICANT INFORMATION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙5 1.2. EQUIPMENT UNDER TEST (EUT) DESCRIPTION∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙5 2. TEST RESULTS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙7 2.1. APPLIED REFERENCE DOCUMENTS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙7 3. TEST CONDITIONS SETTING ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙8 3.1. TEST MODE ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙8 3.2. TEST SETUP AND EQUIPMENTS LIST∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙9 3.2.1. CONDUCTED EMISSION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙9 3.2.2. RADIATED EMISSION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 10 4. 47 CFR PART 15B REQUIREMENTS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12 4.1. CONDUCTED EMISSION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12 4.1.1. REQUIREMENT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12 4.1.2. TEST DESCRIPTION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12 4.1.3. TEST RESULT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12 4.2. RADIATED EMISSION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15 4.2.1. REQUIREMENT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15 4.2.2. TEST DESCRIPTION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15 4.2.3. FREQUENCY RANGE OF MEASUREMENT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15 4.2.4. TEST RESULT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 16 ANNEX A TEST SETUP PHOTOS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 19 ANNEX B TEST UNCERTAINTY ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 21 ANNEX C TESTING LABORATORY INFORMATION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 22 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page2 0f 22

REPORT No.：SZ16120122E01 1. IDENTIFICATION OF THE RESPONSIBLE TESTING LABORATORY ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 22 2. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙22 3. ACCREDITATION CERTIFICATE ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 22 4. TEST ENVIRONMENT CONDITIONS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 22 Change History Issue Date Reason for change 1.0 2017-03-30 First edition MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page3 0f 22

REPORT No.：SZ16120122E01 Test Report Declaration Applicant Shenzhen Chuangwei Electronic Appliance Tech Co., Ltd. 4/F,6/F South, Skyworth Industrial Park, Shiyan Bao'an Applicant Address District, Shenzhen, Guangdong Manufacturer Shenzhen Chuangwei Electronic Appliance Tech Co., Ltd. 4/F,6/F South, Skyworth Industrial Park, Shiyan Bao'an Manufacturer Address District, Shenzhen, Guangdong Product Name Tablet PC Model Name TM800W630L, CT811, H811 Brand Name Nuvision HW Version V1.0 SW Version Windows 10 Test Standards 47 CFR Part 15 Subpart B Test Result PASS Reviewed by : Xiao Xiong Approved by : Andy Yeh MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page4 0f 22

REPORT No.：SZ16120122E01 1. Technical Information Note： Provided by applicant 1.1. Applicant Information Company： Shenzhen Chuangwei Electronic Appliance Tech Co., Ltd. Address： 4/F,6/F South, Skyworth Industrial Park, Shiyan Bao'an District, Shenzhen, Guangdong 1.2. Equipment under Test (EUT) Description EUT Type: Tablet PC Serial No: (N/A, marked #1 by test site) Hardware Version: V1.0 Software Version: Windows 10 Power supply: Battery Brand Name: N/A Model No.: EL-24110110PV Serial No.: (N/A, marked #1 by test site) Capacity: 3700mAh Rated Voltage: 3.8V Charge Limit: 4.35V Ancillary Equipment: AC Adapter (Charger for Battery) Brand Name: N/A Model No.: A68-502000 Serial No.: (N/A, marked #1 by test site) Rated Input: 100-240V, 50/60Hz, 350mA Rated Output: 5V, 2.0A NOTE: 1. The EUT is a Tablet PC which supports ISM 2.4GHz Bluetooth band and WIFI (802.11b/g/n) band. 2. It is equipped with a Micro-B USB port and a HDMI port which can be connected to the ancillary equipments. MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page5 0f 22

REPORT No.：SZ16120122E01 3. For a more detailed description, please refer to specification or user’s manual supplied by the applicant and/or manufacturer. MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page6 0f 22

REPORT No.：SZ16120122E01 2. Test Results 2.1. Applied Reference Documents The objective of the report is to perform testing according to 47 CFR Part 15 Subpart B: No. Identity Document Title 1 47 CFR Part 15 Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Test Date Result 1 15.107 Conducted Emission 2017.03.23 PASS 2 15.109 Radiated Emission 2016.03.26 PASS NOTE: The tests were performed according to the method of measurements prescribed in ANSI C63.4-2014. MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page7 0f 22

REPORT No.：SZ16120122E01 3. Test Conditions Setting 3.1. Test Mode 1 The first test mode (Data Transmitting) The EUT configuration of the emission tests is EUT + Battery + AC adapter + PC. In this test mode, the EUT with a T-Flash Card embedded was connected to a PC via the Micro-B USB port. During the measurement, the data is transmitting between the PC and the T-Flash Card of the EUT. 2 The second test mode (HDMI) The EUT configuration of the emission tests is EUT + Battery + AC adapter + Television . During the measurement, the EUT was connected to the AC adapter and the Television, the Television was connected with the EUT via the HDMI port, meanwhile, the EUT was working normally as an intentional device. Note: All test modes are performed, only the worse case (HDMI) is recorded in this report. MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page8 0f 22

REPORT No o.：SZ1612 20122E01 3.2. Te est Setu up and Equipm ments Liist 3.2.1. Conducte ed Emission A. Test Setup: S The EUT iss placed on a 0.8m high h insulating g table, whicch stands onn the grounded conduc cting floor, and keeps 0.4m awayy from the grounded conducting c wall. The EUT E is con nnected to the t power mains throough a LIS SN which provides p 0Ω/50µH off coupling impedance 50 e for the measuring m instrument.. A Pulse Liimiter is use ed to protecct the meas suring instru ument. The e factors of the whole test system m are calibraated to corre ect the read ding. The power strip or extension cord d has been investigated d to make sure s that the e LISN integgrity inma intained witth respect to the impeddance chara acteristics as a prescribeed in ANSI C C63.4-2014 4 at Clause 4.3. B. Equip pments Lis st: Descrip ption M Manufactur rer Model Serial No o. Cal. D Date Du ue. Date Receivver Narda PMM M 9010 595WX110 007 2016.0 06.02 2017.06.01 LISN N S Schwarzbec ck NSL LK 8127 812744 2016.0 06.02 2017.06.01 Pulse Lim miter VTSD 95 561D 9537 2016.0 07.05 2017.07.04 (20dB B) MORLAB M B GROU UP FL1-3, Bu uilding A, FeiYang Sccience Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax:: 86-755-36698525 Block67, BaoAn District, She enZhen , GuangDon ng Province, P. R. China C Http://www w.morlab.cn E-mail: service@morlab..cn Page9 0f 22

REPORT No.：SZ16120122E01 3.2.2. Radiated Emission A. Test Setup: 1. For radiated emissions from 30MHz to1GHz 2. For radiated emissions above 1GHz MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page10 0f 22

REPORT No.：SZ16120122E01 The test is performed in a 3m Semi-Anechoic Chamber; the antenna factor, cable loss and so on of the site (factors) is calculated to correct the reading.The EUT is placed on a 0.8m high insulating Turn Table, and keeps 3m away from theTest Antenna, which is mounted onavariable-height antenna master tower. For the test Antenna: In the frequency range above 30MHz, Bi-Log Test Antenna (30MHz to 1GHz) and Horn TestAntenna (above 1GHz) are used. Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. The emission levels at both horizontal and vertical polarizations should be tested. B. Equipments List: Description Manufacturer Model Serial No. Cal. Date Due. Date MXE EMI Receiver Agilent N9038A MY54130016 2016.06.03 2017.06.02 Semi-Anechoic Changning 9m*6m*6m N/A 2017.01.11 2018.01.10 Chamber Test Antenna - Schwarzbeck VULB 9163 9163-274 2016.12.09 2017.12.08 Bi-Log Test Antenna - Schwarzbeck BBHA9120C 9120C-384 2016.07.05 2017.07.04 Horn MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page11 0f 22

REPORT No.：SZ16120122E01 4. 47 CFR Part 15B Requirements 4.1. Conducted Emission 4.1.1. Requirement According to FCC section 15.107, the radio frequency voltage that is conducted back onto the ACpower line on any frequency within the band 150kHz to 30MHz shall not exceed the limits in thefollowing table, as measured using a 50µH/50Ω line impedance stabilization network (LISN). Frequency range Conducted Limit (dBµV) (MHz) Quasi-peak Average 0.15 - 0.50 66 to 56 56 to 46 0.50 - 5 56 46 5 - 30 60 50 NOTE: a) The limit subjects to the Class B digital device. b) The lower limit shall apply at the band edges. c) The limit decreases linearly with the logarithm of the frequency in the range 0.15 - 0.50MHz. 4.1.2. Test Description See section 3.2.1 of this report. 4.1.3. Test Result The maximum conducted interference is searched using Peak (PK), Quasi-peak (QP) and Average (AV) detectors; the emission levels more than the AV and QP limits, and that have narrow margins from the AV and QP limits will be re-measured with AV and QP detectors.Tests for both L phase and N phase lines of the power mains connected to the EUT are performed. All test modes are considered, refer to recorded points and plots below. A. Test Plot and Suspicious Points: MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page12 0f 22

REPORT No.：SZ16120122E01 (Plot A: L Phase) Fre. Emission Level (dBµV) Limit (dBµV) No. Power-line Verdict (MHz) Quai-peak Average Quai-peak Average 1 0.15 52.46 22.38 66.00 56.00 PASS 2 0.805 47.16 29.89 56.00 46.00 PASS 3 0.88 48.84 32.41 56.00 46.00 PASS Line 4 3.19 46.07 32.54 56.00 46.00 PASS 5 3.32 50.68 38.98 56.00 46.00 PASS 6 4.02 52.70 39.37 56.00 46.00 PASS MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page13 0f 22

REPORT No.：SZ16120122E01 (Plot B: N Phase) Fre. Emission Level (dBµV) Limit (dBµV) No. Power-line Verdict (MHz) Quai-peak Average Quai-peak Average 1 0.15 56.35 17.34 66.00 56.00 PASS 2 0.795 48.12 29.22 56.00 46.00 PASS 3 0.875 48.69 30.74 56.00 46.00 PASS Neutral 4 1.035 46.30 32.44 56.00 46.00 PASS 5 3.32 49.72 35.68 56.00 46.00 PASS 6 4.355 51.38 31.08 56.00 46.00 PASS Result: Pass MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page14 0f 22

REPORT No.：SZ16120122E01 4.2. Radiated Emission 4.2.1. Requirement According to FCC section 15.109 (a), the field strength of radiated emissions from unintentionalradiators at a distance of 3 meters shall not exceed the following values: Frequency Field Strength Limitation at 3m Measurement Dist range (MHz) (µV/m) (dBµV/m) 30.0 - 88.0 100 20log 100 88.0 - 216.0 150 20log 150 216.0 - 960.0 200 20log 200 Above 960.0 500 20log 500 As shown in FCCsection 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector. When average radiated emission measurements are specified in this part, including emission measurements below 1000MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20dB above the maximum permitted average limit for the frequency being investigated unless a different peak emission limit is otherwise specified in the rules. Note: 1) The tighter limit shall apply at the boundary between two frequency range. 2) Limitation expressed in dBµV/m is calculated by 20log Emission Level(µV/m). 4.2.2. Test Description See section 3.2.2 of this report. 4.2.3. Frequency range of measurement According to 15.33(b)(1), the frequency range of radiated measurement for the EUT is listed in the following table: MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page15 0f 22

REPORT No.：SZ16120122E01 4.2.4. Test Result The maximum radiated emission is searched using PK, QP and AV detectors; the emission levels more than the limits, and that have narrow margins from the limits will be re-measured with AV and QP detectors. Both the vertical and the horizontal polarizations of the Test Antenna are considered to perform the tests. All test modes are considered, refer to recorded points and plots below. The amplitude of spurious emissions (6GHz-12.5GHz) which are attenuated more than 20 dB below the permissible value need not be reported. Note: All radiated emission tests were performed in X, Y, Z axis direction, and only the worst axis test condition was recorded in this test report. MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page16 0f 22

REPORT No.：SZ16120122E01 A. Test Plots and Suspicious Points: (Plot A: 30MHz – 6GHz, Test Antenna Vertical) No. Fre. Pk QP AV Limit-PK Limit-QP Limit-AV ANT Verdict MHz dBµV/m dBµV/m dBµV/m dBµV/m dBµV/m dBµV/m 1 59.100 N.A. 35.25 N.A. N.A. 40.00 N.A. V PASS 2 148.340 N.A. 29.21 N.A. N.A. 43.50 N.A. V PASS 3 445.160 N.A. 39.59 N.A. N.A. 46.00 N.A. V PASS 4 593.570 N.A. 39.40 N.A. N.A. 46.00 N.A. V PASS 5 1739.733 50.41 N.A. 44.09 74.00 N.A. 54.00 V PASS 6 4450.880 49.18 N.A. 43.45 74.00 N.A. 54.00 V PASS MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page17 0f 22

REPORT No.：SZ16120122E01 (Plot B: 30MHz – 6GHz, Test Antenna Horizontal) No. Fre. Pk QP AV Limit-PK Limit-QP Limit-AV ANT Verdict MHz dBµV/m dBµV/m dBµV/m dBµV/m dBµV/m dBµV/m 1 51.340 N.A. 25.82 N.A. N.A. 40.00 N.A. H PASS 2 148.340 N.A. 29.66 N.A. N.A. 43.50 N.A. H PASS 3 445.160 N.A. 38.22 N.A. N.A. 46.00 N.A. H PASS 4 741.980 N.A. 38.27 N.A. N.A. 46.00 N.A. H PASS 5 890.390 N.A. 37.97 N.A. N.A. 46.00 N.A. H PASS 6 1559.467 47.06 N.A. 41.57 74.00 N.A. 54.00 H PASS Result: Pass MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page18 0f 22

REPORT No.：SZ16120122E01 Annex A Test Setup Photos 1. Conducted emission main’s port front view 2. Conducted emission main’s port side view MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page19 0f 22

REPORT No.：SZ16120122E01 3. Radiated emission (30MHz-1GHz) 4. Radiated emission (above 1GHz) MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page20 0f 22

REPORT No.：SZ16120122E01 Annex B Test Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. Uncertainty of Conducted Emission: ±1.8dB Uncertainty of Radiated Emission: ±3.1dB MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page21 0f 22

REPORT No.：SZ16120122E01 Annex C Testing Laboratory Information 1. Identification of the Responsible Testing Laboratory Company Name: Shenzhen Morlab Communications Technology Co., Ltd. Department: Morlab Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Responsible Test Lab Manager: Mr. Su Feng Telephone: +86 755 36698555 Facsimile: +86 755 36698525 2. Identification of the Responsible Testing Location Name: Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China 3. Accreditation Certificate Accredited Testing Laboratory: The FCC registration number is 695796. (Shenzhen Morlab Communications Technology Co., Ltd.) 4. Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 35 Relative Humidity (%): 30 - 60 Atmospheric Pressure (kPa): 86 - 106 ***** END OF REPORT ***** MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page22 0f 22


Document Created: 2017-04-20 09:31:42
Document Modified: 2017-04-20 09:31:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC