Test Report

FCC ID: 2AAATFG-1001

Test Report

Download: PDF

FCCID_2172487

FCC ID: 2AAATFG-1001

TABLE OF CONTENTS

1. GENERAL INFORMATION ....................................................................................................3
1.1. Report information............................................................................................................3
1.2. Measurement Uncertainty.................................................................................................3
2. PRODUCT DESCRIPTION ......................................................................................................4
2.1. EUT Description ...............................................................................................................4
2.2. Block Diagram of EUT Configuration..............................................................................6
2.3. Support Equipment List ....................................................................................................6
2.4. Test Conditions .................................................................................................................6
3. TEST RESULTS SUMMARY ...................................................................................................7
Modifications ................................................................................................................................7
4. TEST EQUIPMENT USED .......................................................................................................8
5. ANTENNA REQUIREMENT ...................................................................................................9
5.1. Standard Applicable..........................................................................................................9
5.2. Antenna Connected Construction .....................................................................................9
5.3. Result ................................................................................................................................9
6. CONDUCTED POWER LINE TEST .....................................................................................10
6.1. Test Equipment ...............................................................................................................10
6.2. Test Procedure ................................................................................................................10
6.3. Test Setup........................................................................................................................10
6.4. Conducted Power line Emission Limits..........................................................................10
6.5. Conducted Power Line Test Result.................................................................................11
7. RADIATED EMISSION TEST ...............................................................................................13
7.1. Test Equipment ...............................................................................................................13
7.2. Test Procedure ................................................................................................................13
7.3. Radiated Test Setup ........................................................................................................13
7.4. Radiated Emission Limit.................................................................................................15
7.5. Radiated Emission Test Result .......................................................................................16
8. BAND EDGE .............................................................................................................................21
8.1. Test Equipment ...............................................................................................................21
8.2. Test Procedure ................................................................................................................21
8.3. Band Edge FCC 15.249(d) Limit....................................................................................21
8.4. Band Edge Test Result....................................................................................................22
9. 20-DB BANDWIDTH ...............................................................................................................23
9.1. Test Equipment ...............................................................................................................23
9.2. Test Procedure ................................................................................................................23
9.3. Limit................................................................................................................................23
9.4. Test Result /Plots ............................................................................................................23

BSL13071015Y-1ER-66 Page 2/26

FCC ID: 2AAATFG-1001

Channel List
Frequency Frequency Frequency
Channel Channel Channel
(MHz) (MHz) (MHz)
00 2402 27 2429 54 2456
01 2403 28 2430 55 2457
02 2404 29 2431 56 2458
03 2405 30 2432 57 2459
04 2406 31 2433 58 2460
05 2407 32 2434 59 2461
06 2408 33 2435 60 2462
07 2409 34 2436 61 2463
08 2410 35 2437 62 2464
09 2411 36 2438 63 2465
10 2412 37 2439 64 2466
11 2413 38 2440 65 2467
12 2414 39 2441 66 2468
13 2415 40 2442 67 2469
14 2416 41 2443 68 2470
15 2417 42 2444 69 2471
16 2418 43 2445 70 2472
17 2419 44 2446 71 2473
18 2420 45 2447 72 2474
19 2421 46 2448 73 2475
20 2422 47 2449 74 2476
21 2423 48 2450 75 2477
22 2424 49 2451 76 2478
23 2425 50 2452 77 2479
24 2426 51 2453 78 2480
25 2427 52 2454
26 2428 53 2455

BSL13071015Y-1ER-66 Page 5/26

FCC ID: 2AAATFG-1001

3. TEST RESULTS SUMMARY
FCC 15 Subpart C, Paragraph 15.249:2012
FCC Rules Description of Test Result
Section 15.207 Conducted Emission Compliant
Section 15.249(a) The fundamental field strength Compliant
and the harmonics
Section 15.209 Radiated Emission Compliant
Section 15.249(d)
Section 15.249(d) Band Edge Compliant
Section 15.203 Antenna Requirement Compliant
Section 15.249 20dB Bandwidth Compliant

Remark: “N/A” means “Not applicable”.

Statement: All testing was performed using the test procedures found in ANSI C63.4-2003.

Modifications

No modification was made.

BSL13071015Y-1ER-66 Page 7/26

FCC ID: 2AAATFG-1001

5. ANTENNA REQUIREMENT

5.1. Standard Applicable
For intentional device, according to FCC 47 CFR Section 15.203, an intentional
radiator shall be designed to ensure that no antenna other than that furnished by
the responsible party shall be used with the device.
5.2. Antenna Connected Construction
According to § 15.203, An intentional radiator shall be designed to ensure that no antenna other
than that furnished by the responsible party shall be used with the device. The use of a permanently
attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be
considered sufficient to comply with the provisions of this section. The manufacturer may design
the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack
or electrical connector is prohibited.

The antenna used in this product is PCB antenna. The antenna is permanently attached. Refer to the
product photo.

5.3. Result
Compliance

BSL13071015Y-1ER-66 Page 9/26

FCC ID: 2AAATFG-1001

7.4. Radiated Emission Limit
All emission from a digital device,including any network of conductors and apparatus connected
thereto,shall not exceed the level of field strength specified below :

A. Fundamental and Harmonics Radiated Emissions 15.249(a) Limit

Fundamental
Field as trength of Fundamental(3m) Field as trength of Harmonics(3m)
Frequency
(MHZ) mV/m dBuV/m uV/m dBuV/m
902-928 50 94(AV) 114(Peak) 500 54(AV) 74(Peak)

2400-2483.5 50 94(AV) 114(Peak) 500 54(AV) 74(Peak)
Note: (1) RF Voltage (dBuV)=20 log Voltage(uV)
(2) Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or
system.
(3) The emission limit in this paragraph os based on measurement instrumentation employing an average detector.Measurement using
instrumentation with a peak detector function,corresponding to 20dB above the maximum permitted average limit.

B. Spurious Radiated Emissions.
Limit
Frequency Field Strength of Field Strength of The final
Measurement
(MHz) Quasi-peak Value Quasi-peak Value measurement in band
distance (m)
(microvolts/m) (dBµV/m) 9-90kHz,
110-490kHz and
0.009 - 0.490 2400/F(kHz) / 300
above 1000MHz is
0.490 - 1.705 24000/F(kHz) / 30 performed with
Average detector.
1.705-30 30 29.5 30 Except those
frequency bands
30 - 88 100 40 3
mention above, the
88 - 216 150 43.5 3 final measurement
for frequencies
216 - 960 200 46 3 below 1000MHz is
performed with
Above 960 500 54 3 Quasi Peak detector.
Note: (1) RF Voltage (dBuV)=20 log Voltage(uV)
(2) In the Above Table,the tighter limit applies at the band edges.
(3) Distaqnce refers to the distance in meters between the measuring instrument antenna
and the closed point of any part of the device or system.

BSL13071015Y-1ER-66 Page 15/26

FCC ID: 2AAATFG-1001

7.5. Radiated Emission Test Result
Pass

A. Fundamental Radiated Emissions Data

CH Low

Freq. Read Antenna Cable Preamp Emission HORIZ/ Limits Margin
(MHz) Level Factor Factor (dBuV/m) VERT (dBuV/m) (dB)
Loss
(dBuV) (dB/m) (dB) AV/PK AV/PK
AV/PK (dB)
2402 62.03/85.47 27.47 5.42 30.17 64.75/88.19 VERT 94/114 -29.25/-23.1
2402 68.18/90.95 27.47 5.42 30.17 70.9/93.67 HORIZ 94/114 -25.81/-20.33

CH Middle

Freq. Read Antenna Cable Preamp Emission HORIZ/ Limits Margin
(MHz) Level Factor Factor (dBuV/m) VERT (dBuV/m) (dB)
Loss
(dBuV) (dB/m) (dB) AV/PK AV/PK
AV/PK (dB)
2441 61.93/85.67 27.40 5.40 30.15 64.58/88.32 VERT 94/114 -29.42/-25.68
2441 68.76/91.98 27.40 5.40 30.15 71.41/94.63 HORIZ 94/114 -22.59/-19.37

CH High

Freq. Read Antenna Cable Preamp Emission HORIZ/ Limits Margin
(MHz) Level Factor Factor (dBuV/m) VERT (dBuV/m) (dB)
Loss
(dBuV) (dB/m) (dB) AV/PK AV/PK
AV/PK (dB)
2480 60.62/85.39 27.50 5.46 29.98 63.6/88.37 VERT 94/114 -30.4/-25.63
2480 66.77/90.2 27.50 5.46 29.98 69.75/93.18 HORIZ 94/114 -24.25/-20.82

Remark:
Final Emission =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor

BSL13071015Y-1ER-66 Page 16/26

FCC ID: 2AAATFG-1001

B. General Radiated Emissions Data

For below 9kHz-30MHz Spurious

Freq. Emission(dBuV/m) Limits(dBuV/m) Margin
(MHz) PK / AV PK / AV (dB)

- - - -
- - - -
Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported.

BSL13071015Y-1ER-66 Page 17/26

FCC ID: 2AAATFG-1001

For 1000MHz-25000MHz Spurious

CH Low
Freq. Emission(dBuV/m) HORIZ/ Limits(dBuV/m) Margin
(MHz) AV/PK VERT AV/PK (dB)

4804 38.61/54.33 54.0/74.0 -15.39/-19.67
7206 38.9/52.87 VERT 54.0/74.0 -15.1/-21.13
9608 38.06/52.34 54.0/74.0 -15.94/-21.66
4804 40/55.39 54.0/74.0 -14/-18.61
7206 39.16/54.44 HORIZ 54.0/74.0 -14.84/-19.56
9608 39.03/54.29 54.0/74.0 -14.97/-19.71

CH Middle
Freq. Emission(dBuV/m) HORIZ/ Limits(dBuV/m) Margin
(MHz) AV/PK VERT AV/PK (dB)

4882 41.01/53.44 54.0/74.0 -12.99/-20.56
7323 39.5/53.28 VERT 54.0/74.0 -14.5/-20.72
9764 39.9/54.31 54.0/74.0 -14.1/-19.69
4882 41.31/55.5 54.0/74.0 -12.69/-18.5
7323 40.63/54.37 HORIZ 54.0/74.0 -13.37/-19.63
9764 40.01/53.95 54.0/74.0 -13.99/-20.05

CH High
Freq. Emission(dBuV/m) HORIZ/ Limits(dBuV/m) Margin
(MHz) AV/PK VERT AV/PK (dB)

4960 39.51/55.17 54.0/74.0 -14.49/-18.83
7440 39.06/54.51 VERT 54.0/74.0 -14.94/-19.49
9920 39.34/53.86 54.0/74.0 -14.66/-20.14
4960 42.52/55.65 54.0/74.0 -11.48/-18.35
7440 41.33/54.97 HORIZ 54.0/74.0 -12.67/-19.03
9920 40.67/54.28 54.0/74.0 -13.33/-19.72

Note:
1. The average measurement was not performed when the peak measured data under the limit of average detection.
2. Emissions attenuated more than 20 dB below the permissible value are not reported.

BSL13071015Y-1ER-66 Page 20/26

FCC ID: 2AAATFG-1001

8. BAND EDGE

8.1. Test Equipment
Please refer to Section 4 this report.

8.2. Test Procedure
The EUT and its simulators are placed on a turn table which is 0.8 meter above ground. The turn table can rotate 360 degrees to
determine the position of the maximum emission level. The EUT was positioned such that the distance from antenna to the EUT was 3
meters. The antenna can move up and down between 1 meter and 4 meters to find out the maximum emission level. Both horizontal and
vertical polarization of the antenna are set on measurement. In order to find the maximum emission, all of the interface cables must be
manipulated according to ANSI C63.4: 2003 on radiated measurement. The bandwidth setting below 1GHz and above 1GHz on the
field strength meter is 120 kHz and 1MHz respectively.

8.3. Band Edge FCC 15.249(d) Limit
Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level
of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation.

BSL13071015Y-1ER-66 Page 21/26

FCC ID: 2AAATFG-1001

8.4. Band Edge Test Result
Pass
ALL of the restriction bands were tested,and only the data of worst case was exhibited.

CH Low

Freq. Emission(dBuV/m) HORIZ/ Limits(dBuV/m) Margin
(MHz) AV/PK VERT AV/PK (dB)

2390 36.66/46.38 54.0/74.0 -17.34/-27.62
2400 46.95/62.92 VERT 54.0/74.0 -7.05/-11.08
2390 35.05/43.44 54.0/74.0 -18.95/-30.56
2400 46.21/62.49 HORIZ 54.0/74.0 -7.79/-11.51

CH High
Freq. Emission(dBuV/m) HORIZ/ Limits(dBuV/m) Margin
(MHz) AV/PK VERT AV/PK (dB)

2483.5 41.56/50.22 54.0/74.0 -12.44/-23.78
2500.00 37.11/49.56 VERT 54.0/74.0 -16.89/-24.44
2483.5 40.57/49.7 54.0/74.0 -13.43/-24.3
2500.00 36.38/48.02 HORIZ 54.0/74.0 -17.62/-25.98

Remark:
1. Factor = Antenna Factor + Cable Loss – Pre-amplifier.

BSL13071015Y-1ER-66 Page 22/26

FCC ID: 2AAATFG-1001

9. 20-DB BANDWIDTH

9.1. Test Equipment
Please refer to Section 4 this report.

9.2. Test Procedure
1. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer.
2. Set center frequency of spectrum analyzer = operating frequency.
3. The spectrum analyzer as RBW=30 KHz, VBW=100 KHz, Sweep=auto
4. Mark the peak frequency and –20dB (upper and lower) frequency.

9.3. Limit
Please refer section15.249

9.4. Test Result /Plots

Channel 20dB
Limit Frequency Bandwidth
(MHz) (MHz)
/ 2402 0.99
/ 2441 1.01
/ 2480 0.96

BSL13071015Y-1ER-66 Page 23/26

Document Created: 2014-01-20 17:17:09
Document Modified: 2014-01-20 17:17:09

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC