2AAAS-CM01 FCC MPE Report

FCC ID: 2AAAS-CM01

RF Exposure Info

Download: PDF
FCCID_2925225

Compliance Certification Services Inc. FCC ID: 2AAAS-CM01 Report No.：T160216S01-RP1-1 IEEE C95.1 KDB 447498 D03 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For Indoor IP Camera Model: CM01 Trade Name: Vivint Issued for Vivint, Inc. 4931 N. 300 W. Provo, Utah 84604 United States Issued by Compliance Certification Services Inc. Hsinchu Lab. NO. 989-1, Wenshan Rd., Shangshan Village, Qionglin Township, Hsinchu County 30741, Taiwan (R.O.C.) http://www.ccsrf.com service@ccsrf.com Issued Date: March 01, 2016 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF or any government agencies. The test results of this report relate only to the tested sample identified in this report. Page 1 of 6 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Compliance Certification Services Inc. FCC ID: 2AAAS-CM01 Report No.：T160216S01-RP1-1 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 03/01/2016 Initial Issue All Page Gloria Chang Page 2 of 6 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Compliance Certification Services Inc. FCC ID: 2AAAS-CM01 Report No.：T160216S01-RP1-1 TABLE OF CONTENTS 1. LIMIT .............................................................................................................................. 4 2. EUT SPECIFICATION.................................................................................................... 4 3. TEST RESULTS ............................................................................................................ 5 4. MAXIMUM PERMISSIBLE EXPOSURE ........................................................................ 6 Page 3 of 6 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Compliance Certification Services Inc. FCC ID: 2AAAS-CM01 Report No.：T160216S01-RP1-1 1. Limit According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. 2. EUT Specification Product Name Indoor IP Camera Model Number CM01 Identify Number T160216S01 Received Date January 29, 2016 Frequency band 802.11b/g/n HT20 Mode: 2412MHz ~ 2462MHz (Operating) 802.11n HT40 Mode: 2422MHz ~ 2452MHz Device category Mobile (>20cm separation) Occupational/Controlled exposure (S = 5mW/cm2) Exposure General Population/Uncontrolled exposure classification (S=1mW/cm2) Antenna FPC Antenna, Antenna Gain :2.61 dBi (Numeric gain: 1.82) Specification PIFA Antenna, Antenna Gain :2.46 dBi (Numeric gain: 1.76) IEEE 802.11b Mode: 24.12 dBm (258.226 mW) Maximum Peak IEEE 802.11g Mode: 27.30 dBm (537.032 mW) output power IEEE 802.11n HT 20 Mode: 26.89 dBm (488.652 mW) IEEE 802.11n HT 40 Mode: 26.61 dBm (458.142 mW) Evaluation applied MPE Evaluation* Remark: 1. For more details, please refer to the User’s manual of the EUT. 2. This submittal(s) (test report) is intended for FCC ID: 2AAAS-CM01 filing to comply with Section 15.207, 15.209 and 15.247 of the FCC Part 15, Subpart C Rules. Page 4 of 6 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Compliance Certification Services Inc. FCC ID: 2AAAS-CM01 Report No.：T160216S01-RP1-1 3. Test Results No non-compliance noted. Calculation 30  P  G E2 Given E  & S d 377 Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in watts / meter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30  P  G S 377 d 2 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields 30  P / 1000  G PG S  0.0796  2 Equation 1 377  d / 100 2 d Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Page 5 of 6 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.

Compliance Certification Services Inc. FCC ID: 2AAAS-CM01 Report No.：T160216S01-RP1-1 4. Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: S  0.000199  P  G Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 IEEE 802.11b Mode: Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 2462 258.226 1.82 20 0.0935 1 IEEE 802.11g Mode: Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 2437 537.032 1.82 20 0.1945 1 IEEE 802.11n HT20 Mode: Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 2437 488.652 1.82 20 0.1770 1 IEEE 802.11n HT40 Mode: Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 2437 458.142 1.82 20 0.1659 1 Page 6 of 6 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.


Document Created: 2019-09-13 01:55:30
Document Modified: 2019-09-13 01:55:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC