Test report 01

FCC ID: 2AAAS-CE04

Test Report

Download: PDF
FCCID_4065083

SELECTED PORTIONS OF CFR 47 PART 15 SUBPART C §15.255 TEST REPORT FOR 60 GHz OUTDOOR POINT-TO-MULTIPOINT TDD RADIO MESH MODEL NUMBER: CE04 FCC ID: 2AAAS-CE04 REPORT NUMBER: 12393320-E1V2 ISSUE DATE: NOVEMBER 6, 2018 PREPARED FOR National Technical Systems 41039 Boyce Road Fremont, CA 94538, USA ON BEHALF OF VIVINT, INC. 4931 N. 300 West, Provo, UT 84604, USA Prepared by UL VERIFICATION SERVICES INC 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 NVLAP LAB CODE 200065-0

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 Revision History Issue Rev. Date Revisions Revised By V1 8/9/2018 Initial Issue Michael Heckrotte Changed typo “Mash” to “Mesh” V2 11/6/2018 Removed Test Setup Photos Michael Heckrotte Updated wordings on Section 6.1 Page 2 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. CALIBRATION AND UNCERTAINTY ................................................................................ 5 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 5 4.2. MEASUREMENT UNCERTAINTY ............................................................................... 5 5. SCOPE OF TESTS PERFORMED ..................................................................................... 6 6. EQUIPMENT UNDER TEST ............................................................................................... 6 6.1. MANUFACTURER’S DESCRIPTION OF EUT ............................................................. 6 6.2. OUTPUT POWER........................................................................................................ 6 6.3. DESCRIPTION OF TEST SETUP ................................................................................ 7 7. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 9 8. APPLICABLE LIMITS AND TEST RESULTS ...................................................................10 8.1. DUTY CYCLE .............................................................................................................10 8.2. 6 dB BANDWIDTH ......................................................................................................11 8.3. 99% and 26 dB BANDWIDTHS...................................................................................14 8.4. PEAK AND AVERAGE RADIATED POWER ..............................................................16 8.5. PEAK CONDUCTED OUTPUT POWER.....................................................................18 8.6. TX SPURIOUS EMISSIONS, 40 – 200 GHz ...............................................................19 9. SETUP PHOTOS ...............................................................................................................20 Page 3 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 1. ATTESTATION OF TEST RESULTS COMPANY NAME: VIVINT, INC 4931 N. 300 WEST, PROVO, UT 84604, USA. EUT DESCRIPTION: 60 GHz OUTDOOR POINT-TO-MULTIPOINT TDD RADIO MESH MODEL: CE04 SERIAL NUMBER: 0191803100040C DATE TESTED: JULY 5th & 6TH, 2018 APPLICABLE STANDARDS STANDARD TEST RESULTS Selected portions of CFR 47 Part 15 Subpart C §15.255 Complies UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Prepared By: MICHAEL HECKROTTE GIA-PIAO CHIN PRINCIPAL ENGINEER TEST ENGINEER UL Verification Services Inc. UL Verification Services Inc. Page 4 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.10-2013 and FCC CFR 47 Part 15. 3. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47266 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm. 4. CALIBRATION AND UNCERTAINTY 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations, and is traceable to recognized national standards. 4.2. MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus: PARAMETER UNCERTAINTY Conducted Disturbance, 0.15 to 30 MHz ±3.52 dB Radiated Disturbance, 30 to 1000 MHz ±4.94 dB Radiated Disturbance, 1 to 6 GHz ±3.86 dB Radiated Disturbance, 6 to 18 GHz ±4.23 dB Radiated Disturbance, 18 to 26 GHz ±5.30 dB Radiated Disturbance, 26 to 40 GHz ±3.23 dB Radiated Disturbance, 40 GHz above ±3.50dB Uncertainty figures are valid to a confidence level of 95%. Page 5 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 5. SCOPE OF TESTS PERFORMED This report contains measurement data listed below: 1. Duty Cycle 2. Bandwidths (6dB Bandwidth, 99% & 26dB Bandwidths) 3. Peak Radiated EIRP & Average Radiated EIRP 4. Peak Conducted Power 5. Tx Spurious Emissions, 40 – 200 GHz 6. EQUIPMENT UNDER TEST 6.1. MANUFACTURER’S DESCRIPTION OF EUT The Vivint Inc model CE04 is an outdoor 802.11ad (Multi)Point-to-Multipoint TDD transceiver, operating within the 57 – 64 GHz band, that is designed to provide fast network services to homes in rural environment. It is powered by PoE or direct 48 VDC adapter. It also contains a 2.4 GHz 11bgn Wi-Fi transceiver for management purposes, which is not covered under this report. The antenna system consists of two integral phased array antenna elements provided in each of the four directions. Each phased array antenna element has 30 antennas (4 faces of 60 (2x30) antennas = 240 total antennas). The antenna gain is 23 dBi. 6.2. OUTPUT POWER The phase-array antenna pair is integral thus radiated measurements are made. The EIRP was measured at the worst-case condition, thus the EIRP measurement conditions correspond to the maximum EUT antenna gain. Therefore the maximum antenna gain of 23 dBi is used to calculate the Peak Output Power. The peak conducted output power for Channel 1 is 8.7 dBm (7.41 mW). The peak conducted output power for Channel 2 is 17.5 dBm (56.23 mW). The peak conducted output power for Channel 3 is 17.6 dBm (57.54 mW). Page 6 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 6.3. DESCRIPTION OF TEST SETUP SUPPORT EQUIPMENT PERIPHERAL SUPPORT EQUIPMENT LIST Description Manufacturer Model Serial Number PoE Injector Phihong POE50U-560DG P71304366A1 Ethernet Switch TP-Link TL-SG105E 2173509004882 Switch Power Supply TP-Link T090060-2C1 - Laptop HP Probook 5cg5284dsw Laptop Power Supply HP 756413-003 WECJQ0CAR19CMW I/O CABLES I/O Cable List Cable Port # of Connector Cable Cable No Identical Type Type Length Remarks Ports (m) 1 DC 1 2 Wire Shielded 2 PoE - Main 2 Ethernet 1 RJ45 Shielded 2 PoE - EUT 3 Ethernet 1 Cat 6 Shielded 10 PoE - Switch 4 Ethernet 1 Cat 6 Shielded 10 Laptop - Switch 5 DC 1 2 Wire Unshielded 2 Laptop - Main 6 DC 1 3 Wire Unshielded 2 Switch - Main TEST SETUP A support Laptop was connected to the EUT via an ethernet switch and PoE for programming the test mode. Page 7 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 SETUP DIAGRAM FOR TESTS During testing, one radio, from one quadrant, was transmitting at maximum power on the individual V-band channel. The 2.4 GHz 11bgn Wi-Fi transceiver was turned off. Page 8 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 7. TEST AND MEASUREMENT EQUIPMENT The following test and measurement equipment was utilized for the tests documented in this report: Test Equipment List Description Manufacturer Model S/N Local ID Cal (T No.) Due PXA Signal Analyzer Agilent N9030A MY52350427 313 8/7/2018 Horn antenna, 33-50 GHz CMI HO22R -- -- CNR LNA, 40-50 GHz Spacek Labs SL4510-33-4W 14J05 1099 8/14/2018 Horn Antenna, 50-75 GHz CMI HO15R -- -- CNR LNA, 50-75 GHz Vivatech VTLNA-15-6018-FB 2013051 -- 8/29/2018 Harmonic Mixer, 50-80 GHz Keysight M1970V MY51390830 994 8/16/2018 Horn Antenna, 75-110 GHz CMI HO10R -- -- CNR LNA, 75-110 GHz Spacek SLW-22-5 15J04 1600079 8/30/2018 Harmonic Mixer, 75-110 GHz Keysight M1970W MY51430784 993 8/16/2018 Horn Antenna, 110-170 GHz CMI HO6R -- -- CNR LNA, 110-170 GHz Vivatech VTLNA-06S01 2015085 -- 8/31/2018 Harmonic Mixer, 110-170 GHz OML M06HWDXA F90519-2 150918-1 8/14/2018 Horn Antenna, 170-260 GHz CMI HO4R -- -- CNR Harmonic Mixer, 170-260 GHz OML M04HWDXA 150918-1 -- 8/14/2018 Digital Signal Analyzer, 8 GHz Agilent DSA90804A MY51420139 215 9/18/2018 Low Pass Filter, 10 MHz Solar Electric Co. 6623-10 136101 417 7/30/2018 P-Series Power Meter Keysight N1913A MY53100006 412 3/5/2019 Power Sensor, 50-75 GHz Agilent V8486-H02 MY52300008 433 8/25/2018 RF Detector, 50-75 GHz Spacek Labs DV-2P 17A27 -- CNR Analog Signal Generator, 40 GHz Agilent E8257D MY48050681 181 8/3/2018 All horn antennas at and above the 33-50 GHz band are standard gain horns. In accordance with C63.10 clause 4.4.3 (a) these antennas do not need to be calibrated. UL measures the critical dimensions on an annual basis and checks for damage and deterioration before each test. Page 9 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 8. APPLICABLE LIMITS AND TEST RESULTS 8.1. DUTY CYCLE LIMIT None; for reporting purposes only. TEST PROCEDURE An antenna, located approximately 3m from the EUT, was connected to the input of an 50-75 GHz RF detector, and the output of the detector was connected to an oscilloscope. The internal duty cycle function of the oscilloscope is utilized to measure the duty cycle. RESULT Duty Cycle Correction Factor = 10 * Log (0.999) = 0.004 dB DUTY CYCLE Page 10 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 8.2. 6 dB BANDWIDTH APPLICABLE RULE §15.255 (e) (1) For the purposes of this paragraph, emission bandwidth is defined as the instantaneous frequency range occupied by a steady state radiated signal with modulation, outside which the radiated power spectral density never exceeds 6 dB below the maximum radiated power spectral density in the band, as measured with a 100 kHz resolution bandwidth spectrum analyzer. The center frequency must be stationary during the measurement interval, even if not stationary during normal operation (e.g. for frequency hopping devices). LIMIT None; for reporting purposes only. TEST PROCEDURE ANSI C63.10 Clause 9.3 RESULTS Channel Frequency 6 dB Bandwidth (GHz) (GHz) 1 58.32 1.290 2 60.48 1.360 3 62.64 1.165 Page 11 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 6 dB BANDWIDTH CHANNEL 1 CHANNEL 2 Page 12 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 6 dB BANDWIDTH CHANNEL 3 Page 13 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 8.3. 99% and 26 dB BANDWIDTHS LIMIT None; for reporting purposes only. TEST PROCEDURE The spectrum analyzer and external mixer are set up to measure the radiated output of the transmitter. RESULTS Channel Frequency 99% Bandwidth 26 dB Bandwidth (GHz) (GHz) (GHz) 1 58.32 1.8823 3.5250 2 60.48 1.9395 3.4550 3 62.64 1.9345 3.5270 CHANNEL 1 Page 14 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 99% and 26 dB BANDWIDTH CHANNEL 2 CHANNEL 3 Page 15 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 8.4. PEAK AND AVERAGE RADIATED POWER LIMIT § 15.255 (c) Within the 57-71 GHz band, emission levels shall not exceed the following equivalent isotropically radiated power (EIRP): § 15.255 (c) (1) (ii) For fixed point-to-point transmitters located outdoors, the average power of any emission shall not exceed 82 dBm, and shall be reduced by 2 dB for every dB that the antenna gain is less than 51 dBi. The peak power of any emission shall not exceed 85 dBm, and shall be reduced by 2 dB for every dB that the antenna gain is less than 51 dBi. § 15.255 (c) (1) (ii) (A) The provisions in this paragraph (c) for reducing transmit power based on antenna gain shall not require that the power levels be reduced below the limits specified in paragraph (c) (1) (i) of this section. § 15.255 (c) (1) (i) The average power of any emission shall not exceed 40 dBm and the peak power of any emission shall not exceed 43 dBm TEST PROCEDURE ANSI C63.10 Clause 9.11 Measurements are made at a distance greater than or equal to the far field boundary distance. The measured power level is converted to EIRP using the Friis equation: EIRP = PT * GT = (PR / GR) * (4 * Pi * D / )^2 where, PR is the received power GR is the gain of the receive measurement antenna D is the measurement distance  is the wavelength Notes: For average power measurements, PR is corrected for duty cycle. Calculations are made in the log form equivalent to the linear form listed above. Page 16 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 FAR FIELD BOUNDARY CALCULATIONS The far-field boundary is given as: Rfar field = (2 * L^2) /  where, L = Largest Antenna Dimension, including the reflector, in meters  = wavelength in meters The dimension of integral patch-array antenna is 24mm x 24mm. Channel Frequency L Lambda R (Far Field) (GHz) (m) (m) (m) 1 58.32 0.034 0.0051 0.45 2 60.48 0.034 0.0050 0.46 3 62.64 0.034 0.0048 0.48 Radiated power measurements are performed at a 3 meter test distance. RESULTS PEAK EIRP Center CH Meas. Measured Measured Waveguide Received Rx Ant. EIRP EIRP Margin Pass Frequency Dist. Peak Voltage Power Loss Power Gain Limit Or (GHz) (m) (mV) (dBm) (dB) (dBm) (dBi) (dBm) (dBm) (dB) Fail 58.32 1 3 24.82 -23.2 0.6 -22.6 23 31.7 43 -11.3 Pass 60.48 2 3 110.3 -14.7 0.6 -14.1 23 40.5 43 -2.5 Pass 62.64 3 3 98.3 -14.9 0.6 -14.3 23 40.6 43 -2.4 Pass AVERAGE EIRP Center CH Meas. Duty Measured Measured Waveguide Received Rx Ant. Duty Cycle EIRP EIRP Margin Pass Frequency Dist. Cycle Avg Voltage Power Loss Power Gain Corr Fac Limit Or (GHz) (m) % (mV) (dBm) (dB) (dBm) (dBi) (dB) (dBm) (dBm) (dB) Fail 58.32 1 3 99.9 19.93 -24.5 0.6 -23.9 23 0.004 30.4 40 -9.6 Pass 60.48 2 3 99.9 95.34 -15.8 0.6 -15.2 23 0.004 39.4 40 -0.6 Pass 62.64 3 3 99.9 86.33 -15.8 0.6 -15.2 23 0.004 39.7 40 -0.3 Pass Page 17 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 8.5. PEAK CONDUCTED OUTPUT POWER LIMIT §15.255 (e) Except as specified paragraph (e) (1) of this section, the peak transmitter conducted output power shall not exceed 500 mW. Depending on the gain of the antenna, it may be necessary to operate the intentional radiator using a lower peak transmitter output power in order to comply with the EIRP limits specified in paragraph (b) of this section. §15.255 (e) (1) Transmitters with an emission bandwidth of less than 100 MHz must limit their peak transmitter conducted output power to the product of 500 mW times their emission bandwidth divided by 100 MHz. For the purposes of this paragraph, emission bandwidth is defined as the instantaneous frequency range occupied by a steady state radiated signal with modulation, outside which the radiated power spectral density never exceeds 6 dB below the maximum radiated power spectral density in the band, as measured with a 100 kHz resolution bandwidth spectrum analyzer. The center frequency must be stationary during the measurement interval, even if not stationary during normal operation (e.g., for frequency hopping devices). PROCEDURE ANSI C63.10 Clause 9.7 RESULTS PEAK OUTPUT POWER Frequency CH Peak EUT Output Output Limit Margin Pass EIRP Ant. Gain Power Power Or (GHz) (dBm) (dBi) (dBm) (mW) (mW) (mW) Fail 58.32 1 31.7 23.0 8.70 7.41 500 -493 Pass 60.48 2 40.5 23.0 17.50 56.23 500 -444 Pass 62.64 3 40.6 23.0 17.60 57.54 500 -442 Pass Page 18 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 12393320-E1V2 DATE: NOVEMBER 6, 2018 60 GHz Outdoor Point-to-Multipoint TDD Radio Mesh FCC ID: 2AAAS-CE04 8.6. TX SPURIOUS EMISSIONS, 40 – 200 GHz LIMITS §15.255 (d) (1) The power density of any emissions outside the 57-71 GHz band shall consist solely of spurious emissions. §15.255 (d) (3) Between 40 GHz and 200 GHz, the level of these emissions shall not exceed 90 pW/cm2 at a distance of 3 meters. §15.255 (d) (4) The levels of the spurious emissions shall not exceed the level of the fundamental emission. TEST PROCEDURE ANSI C63.10 Clause 9.12 RESULTS Channel 1 Average EIRP Frequency Measurement Measured Total Receiving Distance Power Gain (GHz) (m) (dBm) (dBi) 56.56 3 -67.54 21.24 Duty Cycle EIRP EIRP Specification Factor Corr. Factor Distance (dB) (dBm) (W) (m) 0.004 -11.75 0.00006690 3 Power Density Power Density Limit Margin Pass or Fail (W/m^2) (pW/cm^2) (pW/cm^2) (pW/cm&^2) 0.0000005918 59.18 90.00 -30.82 Pass No other emissions detected in the following bands: 40 - 57 GHz No emissions detected in the following bands: 71 - 200 GHz Channel 2 & Channel 3 No emissions detected in the following bands: 40 - 57 GHz 71 - 200 GHz Page 19 of 21 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.


Document Created: 2019-08-29 05:35:11
Document Modified: 2019-08-29 05:35:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC