RF Exposure

FCC ID: 2AAAS-AP02

RF Exposure Info

Download: PDF
FCCID_2453007

EMC Test Data Client: Vivint Wireless Job Number: J96375 T-Log Number: T96435 Model: SR1430 (4x4 5GHz 802.11 master) Project Manager: Christine Krebill Contact: Venkat Kalkunte Project Coordinator: - Standard: FCC 15.B / 15.407 / 15.247 (Old Rules) Class: N/A Maximum Permissible Exposure Test Specific Details The objective of this test session is to perform final qualification testing of the EUT with respect to the Objective: specification listed above. Date of Test: 10/31/2014 Test Engineer: Mark Hill General Test Configuration Calculation uses the free space transmission formula: S = (PG)/(4 πd2) Where: S is power density (W/m2), P is output power (W), G is antenna gain relative to isotropic, d is separation distance from the transmitting antenna (m). Summary of Results Device complies with Power Density requirements at 20cm Yes ti separation: Use: General Antenna: Effective gain varies with frequency, as shown below EUT Cable Loss Ant Power Power Density (S) MPE Limit Freq. Power Loss Gain at Ant EIRP at 20 cm at 20 cm MHz dBm mW* dB dBi dBm mW mW/cm^2 mW/cm^2 5310 19.3 85.1 0 7.5 19.3 478.63 0.095 1.000 5510 17.9 61.7 0 8.0 17.9 389.05 0.077 1.000 5550 21.9 154.9 0 8.0 21.9 977.24 0.194 1.000 5670 21.7 147.9 0 8.0 21.7 933.25 0.186 1.000 5710 22.4 172.9 0 8.0 22.4 1090.93 0.217 1.000 5755 21.8 151.4 0 8.5 21.8 1071.52 0.213 1.000 5795 26.8 478.6 0 8.5 26.8 3388.44 0.674 1.000 T96435 (1430)_Old Rules MPE Page 1 of 1


Document Created: 2014-11-13 09:19:03
Document Modified: 2014-11-13 09:19:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC