SER180718405001E-Wireless Charging

FCC ID: 2AA7Y-MOSHIQI002

Test Report

Download: PDF
FCCID_4055601

Report No.: SER180718405001E FCC Test Report FCC ID: 2AA7Y-MOSHIQI002 Product: Symbus Q Trade Name: Moshi Model Number: 99MO084218 99MO084215, 99MO084216, Serial Model: 99MO084217 Report No.: SER180718405001E Prepared for Aevoe Inc. 27F,No.68,Zhong Xiao E.Rd,Sec.5,Xin Yi Dist,Taipei 110,Taiwan Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China Tel.: +86-0755-61156588 Fax.: +86-0755-61156599 Website: www.ntek.org.cn Version.1.1 Page 1 of 26

Report No.: SER180718405001E TEST RESULT CERTIFICATION Applicant’s name ................. : Aevoe Inc. Address ................................. : 27F,No.68,Zhong Xiao E.Rd,Sec.5,Xin Yi Dist,Taipei 110,Taiwan Manufacturer's Name .......... : Aevoe Inc. Address ................................. : 27F,No.68,Zhong Xiao E.Rd,Sec.5,Xin Yi Dist,Taipei 110,Taiwan Product description Product name............................ : Symbus Q Model and/or type reference : 99MO084218, 99MO084215, 99MO084216, 99MO084217 FCC part 15C:2018 Standards ............................. : ANSI C63.10:2013 This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. The test results of this report relate only to the tested sample identified in this report. Date of Test ........................................... : Date (s) of performance of tests ............. : 19 Jul. 2018 ~ 27 Sep. 2018 Date of Issue .......................................... : 27 Sep. 2018 Test Result.............................................. : Pass Testing Engineer : (Eileen Liu) Technical Manager : (Jason Chen) Authorized Signatory : (Sam Chen) Version.1.1 Page 2 of 26

Report No.: SER180718405001E Table of Contents Page 1 . TEST SUMMARY 4 1.1 FACILITIES AND ACCREDITATIONS 5 1.2 LABORATORY ACCREDITATIONS AND LISTINGS 5 1.3 MEASUREMENT UNCERTAINTY 5 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST SETUP 9 2.3 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL 10 2.4 MEASUREMENT INSTRUMENTS LIST 11 3 . EMC EMISSION TEST 12 3.1 CONDUCTED EMISSION MEASUREMENT 12 3.1.1 POWER LINE CONDUCTED EMISSION 12 3.1.2 TEST PROCEDURE 13 3.1.3 TEST SETUP 13 3.1.4 EUT OPERATING CONDITIONS 13 3.1.5 TEST RESULTS 14 3.2 RADIATED EMISSION MEASUREMENT 18 3.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT 18 3.2.2 TEST PROCEDURE 19 3.2.3 TEST SETUP 20 3.2.4 TEST RESULTS 21 4. ANTENNA APPLICATION 26 4.1 Antenna Requirement 26 4.2 Result 26 Version.1.1 Page 3 of 26

Report No.: SER180718405001E 1. TEST SUMMARY Test procedures according to the technical standards: EMC Emission Standard Test Item FCC Rules Limit Judgment Remark Conducted §15.207 Class B PASS Emission FCC part 15C:2018 Radiated §15.209 Class B PASS ANSI C63.10:2013 Emission ANTENNA §15.203 / PASS APPLICATION NOTE: (1) ’N/A’ denotes test is not applicable in this Test Report (2) For client’s request and manual description, the test will not be executed. Version.1.1 Page 4 of 26

Report No.: SER180718405001E 1.1 FACILITIES AND ACCREDITATIONS All measurement facilities used to collect the measurement data are located at 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen 518126 P.R. China. The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 and CISPR Publication 22. 1.2 LABORATORY ACCREDITATIONS AND LISTINGS Site Description CNAS-Lab. : The Laboratory has been assessed and proved to be in compliance with CNAS-CL01:2006 (identical to ISO/IEC 17025:2005) The Certificate Registration Number is L5516. IC-Registration : The Certificate Registration Number is 9270A-1. FCC- Accredited : Test Firm Registration Number: 463705. Designation Number: CN1184 A2LA-Lab. : The Certificate Registration Number is 4298.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Name of Firm : Shenzhen NTEK Testing Technology Co., Ltd. Site Location : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen 518126 P.R. China. 1.3 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. A. Conducted Measurement : Test Site Method Measurement Frequency Range U,(dB) NOTE NTEKC01 ANSI 150 KHz ~ 30MHz 3.2 B. Radiated Measurement : Test Site Method Measurement Frequency Range U,(dB) NOTE NTEKA01 ANSI 30MHz ~ 1000MHz 4.7 1GHz ~12.4GHz 5.0 Version.1.1 Page 5 of 26

Report No.: SER180718405001E Revision History Report No. Version Description Issued Date SER180718405001E Rev.01 Initial issue of report 27 Sep.2018 Version.1.1 Page 6 of 26

Report No.: SER180718405001E 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Feature and Specification Equipment Symbus Q Trade Name Moshi FCC ID 2AA7Y-MOSHIQI002 Model No. 99MO084218 Serial Model 99MO084215, 99MO084216, 99MO084217 All models are the same circuit and RF module, Model Difference except the model No.. Operating 110kHz~140kHz Frequency Modulation Induction Technique Antenna Type Induction coil AC supply: Power supply Adapter supply: Model:FSP090-DIECN2 Input: 100-240V~1.5A, 50-60Hz Output: 19.0V 4.74A MAX(90W MAX) Output 5W*2 HW Version 1.2.4 SW Version 1.2.4 Version.1.1 Page 7 of 26

Report No.: SER180718405001E 2.1.1 DESCRIPTION OF TEST MODES EUT Configuration The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner which intends to maximize its emission characteristics in a continuous normal application. EUT Exercise The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. The following summary table is showing all test modes to demonstrate in compliance with the standard. Test Cases Test Item Data Rate/ Modulation AC Conducted Mode 1: Max load* Emission Radiated Test Mode 1: Max load Cases (*)EUT can only access the specified load, can not adjust the size of the load Carrier Frequency and Channel list: Channel Frequency(MHz) 1 0.110 2 0.131 3 0.140 The EUT supports one voltage input and output. The EUT performs one voltage mode pretests. Version.1.1 Page 8 of 26

Report No.: SER180718405001E 2.2 DESCRIPTION OF TEST SETUP For AC Conducted Emission Mode C-1 AC PLUG E-1 E-2 EUT Adapter E-3 Load For Radiated Test Cases C-1 AC PLUG E-1 E-2 EUT Adapter E-3 Load Version.1.1 Page 9 of 26

Report No.: SER180718405001E 2.3 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item Equipment Brand Model/Type No. Series No. Note E-1 Symbus Q Moshi 99MO084218 N/A EUT E-2 Adapter N/A FSP090-DIECN2 N/A Peripherals E-3 Load N/A N/A N/A Peripherals Item Cable Type Shielded Type Ferrite Core Length Note C-1 DC Cable NO YES 1.45m Note: (1) The support equipment was authorized by Declaration of Confirmation. (2) For detachable type I/O cable should be specified the length in cm in『Length』column. (3) “YES” means “shielded” “with core”; “NO” means “unshielded” “without core”. Version.1.1 Page 10 of 26

Report No.: SER180718405001E 2.4 MEASUREMENT INSTRUMENTS LIST Radiation Test equipment I Calibrati tKind of Last Calibrated Manufacturer Type No. Serial No. on Equipment e calibration until period m Spectrum 1 Aglient E4407B MY45108040 2018.05.19 2019.05.18 1 year Analyzer Spectrum 2 Agilent N9020A MY49100060 2017.10.26 2018.10.25 1 year Analyzer 4 Test Receiver R&S ESPI 101318 2018.05.19 2019.05.18 1 year 5 Bilog Antenna TESEQ CBL6111D 31216 2018.04.08 2019.04.07 1 year 50Ω Coaxial 6 Anritsu MP59B 6200983705 2018.05.19 2019.05.18 1 year Switch EMC051835 7 Amplifier EMC 980246 2017.12.06 2018.12.06 1 year SE TTA1840-35- 8 Amplifier MITEQ 177156 2018.08.05 2019.08.04 1 year HG 9 Loop Antenna ARA PLA-1030/B 1029 2018.05.19 2019.05.18 1 year Test Cable 10 N/A R-01 N/A 2017.04.21 2020.04.20 3 year (9KHz-30MHz) Test Cable 11 N/A R-02 N/A 2017.04.21 2020.04.20 3 year (30MHz-1GHz) Conduction Test equipment Kind of Last Calibrated Calibration Item Manufacturer Type No. Serial No. Equipment calibration until period 1 Test Receiver R&S ESCI 101160 2018.05.19 2019.05.18 1 year 2 LISN R&S ENV216 101313 2018.04.18 2019.04.17 1 year SCHWARZBE 3 LISN NNLK 8129 8129245 2018.05.19 2019.05.18 1 year CK 50Ω Coaxial ANRITSU 4 MP59B 6200983704 2018.05.19 2019.05.18 1 year Switch CORP Test Cable 5 (9KHz-30MH N/A C01 N/A 2017.04.21 2020.04.20 3 year z) Test Cable 6 (9KHz-30MH N/A C02 N/A 2017.04.21 2020.04.20 3 year z) Test Cable 7 (9KHz-30MH N/A C03 N/A 2017.04.21 2020.04.20 3 year z) Version.1.1 Page 11 of 26

Report No.: SER180718405001E 3. EMC EMISSION TEST 3.1 CONDUCTED EMISSION MEASUREMENT 3.1.1 POWER LINE CONDUCTED EMISSION (Frequency Range 150KHz-30MHz) limit FREQUENCY (MHz) Quasi-peak Average 0.15 -0.5 66 - 56 * 56 - 46 * 0.50 -5.0 56.00 46.00 5.0 -30.0 60.00 50.00 Note: (1) The tighter limit applies at the band edges. (2) The limit of " * " marked band means the limitation decreases linearly with the logarithm of the frequency in the range. The following table is the setting of the receiver Receiver Parameters Setting Attenuation 10 dB Start Frequency 0.15 MHz Stop Frequency 30 MHz IF Bandwidth 9 kHz Version.1.1 Page 12 of 26

Report No.: SER180718405001E 3.1.2 TEST PROCEDURE a. The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. c. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. d. LISN at least 80 cm from nearest part of EUT chassis. e. For the actual test configuration, please refer to the related Item –EUT Test Photos. 3.1.3 TEST SETUP 3.1.4 EUT OPERATING CONDITIONS The EUT tested system was configured as the statements of 2.3 Unless otherwise a special operating condition is specified in the follows during the testing. Version.1.1 Page 13 of 26

Report No.: SER180718405001E 3.1.5 TEST RESULTS EUT: Symbus Q Model Name. : 99MO084218 Temperature: 26 ℃ Relative Humidity: 54% Pressure: 1010hPa Test Date: 2018-09-20 Test Mode: Mode 1(Normal link) Phase : L Test Voltage: DC 19V from adapter AC 120V/60Hz Frequency Reading Level Correct Factor Measure-ment Limits Margin Remark (MHz) (dBμV) (dB) (dBμV) (dBμV) (dB) 0.1580 35.96 9.75 45.71 65.56 -19.85 QP 0.1580 8.89 9.75 18.64 55.56 -36.92 AVG 0.4020 22.03 9.74 31.77 57.81 -26.04 QP 0.4020 18.89 9.74 28.63 47.81 -19.18 AVG 0.7580 16.09 9.74 25.83 56.00 -30.17 QP 0.7580 6.89 9.74 16.63 46.00 -29.37 AVG 1.2740 19.38 9.74 29.12 56.00 -26.88 QP 1.2740 4.10 9.74 13.84 46.00 -32.16 AVG 1.9380 14.74 9.78 24.52 56.00 -31.48 QP 1.9380 10.02 9.78 19.80 46.00 -26.20 AVG Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Version.1.1 Page 14 of 26

Report No.: SER180718405001E EUT: Symbus Q Model Name. : 99MO084218 Temperature: 26 ℃ Relative Humidity: 54% Pressure: 1010hPa Test Date: 2018-09-20 Test Mode: Mode 1(Normal link) Phase : N Test Voltage: DC 19V from adapter AC 120V/60Hz Frequency Reading Level Correct Factor Measure-ment Limits Margin Remark (MHz) (dBμV) (dB) (dBμV) (dBμV) (dB) 0.1580 37.18 9.74 46.92 65.56 -18.64 QP 0.1580 10.79 9.74 20.53 55.56 -35.03 AVG 0.3980 20.92 9.75 30.67 57.89 -27.22 QP 0.3980 18.85 9.75 28.60 47.89 -19.29 AVG 0.7460 14.05 9.75 23.80 56.00 -32.20 QP 0.7460 7.66 9.75 17.41 46.00 -28.59 AVG 0.8780 34.09 9.75 43.84 56.00 -12.16 QP 0.8780 2.81 9.75 12.56 46.00 -33.44 AVG 1.1420 11.29 9.75 21.04 56.00 -34.96 QP 1.1420 7.78 9.75 17.53 46.00 -28.47 AVG Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Version.1.1 Page 15 of 26

Report No.: SER180718405001E EUT: Symbus Q Model Name. : 99MO084218 Temperature: 26 ℃ Relative Humidity: 54% Pressure: 1010hPa Test Date: 2018-09-20 Test Mode: Mode 1(Normal link) Phase : L Test Voltage: DC 19V from adapter AC 240V/60Hz Frequency Reading Level Correct Factor Measure-ment Limits Margin Remark (MHz) (dBμV) (dB) (dBμV) (dBμV) (dB) 0.2100 33.13 9.76 42.89 63.20 -20.31 QP 0.2100 11.38 9.76 21.14 53.20 -32.06 AVG 0.4220 21.08 9.74 30.82 57.41 -26.59 QP 0.4220 15.34 9.74 25.08 47.41 -22.33 AVG 0.6460 31.13 9.74 40.87 56.00 -15.13 QP 0.6460 4.15 9.74 13.89 46.00 -32.11 AVG 0.7580 28.12 9.74 37.86 56.00 -18.14 QP 0.7580 12.55 9.74 22.29 46.00 -23.71 AVG 1.8900 15.58 9.78 25.36 56.00 -30.64 QP 1.8900 10.53 9.78 20.31 46.00 -25.69 AVG Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Version.1.1 Page 16 of 26

Report No.: SER180718405001E EUT: Symbus Q Model Name. : 99MO084218 Temperature: 26 ℃ Relative Humidity: 54% Pressure: 1010hPa Test Date: 2018-09-20 Test Mode: Mode 1(Normal link) Phase : N Test Voltage: DC 19V from adapter AC 240V/60Hz Frequency Reading Level Correct Factor Measure-ment Limits Margin Remark (MHz) (dBμV) (dB) (dBμV) (dBμV) (dB) 0.1500 30.64 9.74 40.38 65.99 -25.61 QP 0.1500 10.41 9.74 20.15 55.99 -35.84 AVG 0.2779 24.25 9.74 33.99 60.88 -26.89 QP 0.2779 5.70 9.74 15.44 50.88 -35.44 AVG 0.4220 17.91 9.75 27.66 57.41 -29.75 QP 0.4220 14.84 9.75 24.59 47.41 -22.82 AVG 0.7580 19.59 9.75 29.34 56.00 -26.66 QP 0.7580 11.13 9.75 20.88 46.00 -25.12 AVG 0.9660 34.55 9.75 44.30 56.00 -11.70 QP 0.9660 7.86 9.75 17.61 46.00 -28.39 AVG Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Version.1.1 Page 17 of 26

Report No.: SER180718405001E 3.2 RADIATED EMISSION MEASUREMENT 3.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT The emissions from an intentional radiator shall not exceed the field strength levels specified in the following table 15.209(a): 15.205 Restricted bands of operation Notes: (1) Measurement was performed at an antenna to the closed point of EUT distance of meters. (2) Emission level (dBuV/m)=20log Emission level (uV/m). (3) Only spurious frequency is permitted to locate within the Restricted Bands specified in provision of 15.205, and the emissions located in restricted bands also comply with 15.209 limit. (4) The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector Version.1.1 Page 18 of 26

Report No.: SER180718405001E 3.2.2 TEST PROCEDURE Test Arrangement for Radiated Emissions up to 1 GHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited test facility. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna(Blow 30M, use loop antenna), and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. Note: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for quasi-peak detection (QP) at frequency below 1GHz. Test Arrangement for Radiated Emissions above 1 GHz. a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna can be varied from one meter to four meters, the height of adjustment depends on the EUT height and the antenna 3dB beamwidth both, to detect the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. During the radiated emission test, the Spectrum Analyzer was set with the following configurations: Use the following receiver/spectrum analyzer settings: Span = wide enough to fully capture the emission being measured RBW=200Hz for 9KHz to 150KHz, RBW=9kHz for 150KHz to 30MHz, RBW=120KHz for 30MHz to 1GHz VBW ≥ 3*RBW Sweep = auto Detector function = QP Trace = max hold Version.1.1 Page 19 of 26

Report No.: SER180718405001E 3.2.3 TEST SETUP For Radiated Emission Test Set-Up, Frequency Below 30MHz For Radiated Emission 30~1000MHz Version.1.1 Page 20 of 26

Report No.: SER180718405001E 3.2.4 TEST RESULTS TEST RESULTS (9KHz~30MHz) EUT: Symbus Q Model Name. : 99MO084218 Temperature: 24 ℃ Relative Humidity: 54% Pressure: 1010 hPa Test Date : 2018-09-20 Test Mode : Low frequency/Max Load Polarization : X Test Power : DC 19V from adapter AC 120V/60Hz Frequency Ant.Pol. Emissio Limits Margin Remark n Level (MHz) (dBuV/m) (dBuV/m) (dB) 0.084 X 46.11 109.119 -63.01 Avg Avg(fundamenta 0.110 X 70.46 106.776 -36.32 l frequency) 0.684 X 45.17 70.903 -25.73 QP 1.241 X 40.98 65.729 -24.75 QP 5.509 X 40.21 69.542 -29.33 QP Note: Below 30MHz, Pre-test the X, Y, Z axis to find X axis is worst case, so only record X axis test data. X: Field strength which this device generates since the position of the charging coil and loop antenna differ by 0 degrees. Y: Field strength which this device generates since the position of the charging coil and loop antenna differ by 90 degrees. Z: Field strength which this device generates since the position of the charging coil and loop antenna differ by 180 degrees. Version.1.1 Page 21 of 26

Report No.: SER180718405001E EUT: Symbus Q Model Name. : 99MO084218 Temperature: 24 ℃ Relative Humidity: 54% Pressure: 1010 hPa Test Date : 2018-09-20 Test Mode : Mid frequency/Max Load Polarization : X Test Power : DC 19V from adapter AC 120V/60Hz Frequency Ant.Pol. Emission Limits Margin Remark Level (MHz) (dBuV/m) (dBuV/m) (dB) Avg(fundamental 0.131 X 69.85 105.2590 -35.41 frequency) 0.427 X 46.63 94.9960 -48.37 Avg 2.658 X 41.14 69.542 -28.40 QP 8.630 X 38.57 69.542 -30.97 QP 22.197 X 40.75 69.542 -28.79 QP Note: Below 30MHz, Pre-test the X, Y, Z axis to find X axis is worst case, so only record X axis test data. X: Field strength which this device generates since the position of the charging coil and loop antenna differ by 0 degrees. Y: Field strength which this device generates since the position of the charging coil and loop antenna differ by 90 degrees. Z: Field strength which this device generates since the position of the charging coil and loop antenna differ by 180 degrees. Version.1.1 Page 22 of 26

Report No.: SER180718405001E EUT: Symbus Q Model Name. : 99MO084218 Temperature: 24 ℃ Relative Humidity: 54% Pressure: 1010 hPa Test Date : 2018-09-20 Test Mode : High frequency/Max Load Polarization : X Test Power : DC 19V from adapter AC 120V/60Hz Frequency Ant.Pol. Emission Limits Margin Remark Level (MHz) (dBuV/m) (dBuV/m) (dB) 0.096 X 48.41 107.959 -59.55 Avg Avg(fundamental 0.140 X 69.92 104.682 -34.76 frequency) 4.512 X 44.25 69.542 -25.29 QP 10.239 X 40.62 69.542 -28.92 QP 19.987 X 42.39 69.542 -27.15 QP Note: Below 30MHz, Pre-test the X, Y, Z axis to find X axis is worst case, so only record X axis test data. X: Field strength which this device generates since the position of the charging coil and loop antenna differ by 0 degrees. Y: Field strength which this device generates since the position of the charging coil and loop antenna differ by 90 degrees. Z: Field strength which this device generates since the position of the charging coil and loop antenna differ by 180 degrees. Version.1.1 Page 23 of 26

Report No.: SER180718405001E TEST RESULTS (30MHz ~1000MHz) Note: The High/ Middle/ Low frequency mode has been tested. But the Low frequency mode is the worst mode, just reported the worst data. EUT: Symbus Q Model Name. : 99MO084218 Temperature: 24 ℃ Relative Humidity: 54% Pressure: 1010 hPa Test Date : 2018-09-20 Test Mode : High frequency/Max Load Polarization : Horizontal Test Power : DC 19V from adapter AC 120V/60Hz Meter Emission Polar Frequency Factor Limits Margin Reading Level (H/V) Remark (MHz) (dBuV) (dB) (dBuV/m) (dBuV/m) (dB) H 31.8427 6.53 18.25 24.78 40.00 -15.22 QP H 123.6985 8.96 13.28 22.24 43.50 -21.26 QP H 281.9945 8.48 16.63 25.11 46.00 -20.89 QP H 394.8545 15.10 19.30 34.40 46.00 -11.60 QP H 562.6624 8.97 24.15 33.12 46.00 -12.88 QP H 724.2611 6.66 26.85 33.51 46.00 -12.49 QP Remark: Factor = Antenna Factor + Cable Loss - Amplifier. Version.1.1 Page 24 of 26

Report No.: SER180718405001E EUT: Symbus Q Model Name. : 99MO084218 Temperature: 24 ℃ Relative Humidity: 54% Pressure: 1010 hPa Test Date : 2018-09-20 Test Mode : High frequency/Max Load Polarization : Vertical Test Power : DC 19V from adapter AC 120V/60Hz Meter Emission Polar Frequency Factor Limits Margin Reading Level (H/V) Remark (MHz) (dBuV) (dB) (dBuV/m) (dBuV/m) (dB) V 30.6379 9.71 18.67 28.38 40.00 -11.62 QP V 39.1615 11.31 14.78 26.09 40.00 -13.91 QP V 102.7192 10.37 11.97 22.34 43.50 -21.16 QP V 178.7583 11.14 10.83 21.97 43.50 -21.53 QP V 375.9384 9.68 18.42 28.10 46.00 -17.90 QP V 552.8832 7.77 24.51 32.28 46.00 -13.72 QP Remark: Factor = Antenna Factor + Cable Loss - Amplifier. Version.1.1 Page 25 of 26

Report No.: SER180718405001E 4. ANTENNA APPLICATION 4.1 Antenna Requirement 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible partyshall be used with the device. 4.2 Result The EUT antenna is permanent attached antenna. It comply with the standard requirement. END REPORT Version.1.1 Page 26 of 26


Document Created: 2018-10-31 18:10:52
Document Modified: 2018-10-31 18:10:52
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC