Users Manual

FCC ID: 2AA7KPYXIS-HRD23000

Users Manual

Download: PDF
FCCID_4477585

Pyxis User Guide FCC ID:2AA7KPYXIS-HRD23000 Version 0.3.3

Contents User Guide ................................................................................................................................. 2 1. Introduction ........................................................................................................................ 4 1.1 Intro........................................................................................................................................................... 4 1.2 CAUTION READ THIS BEFORE USING BATTERY ........................................................................................... 5 1.3 Charger ...................................................................................................................................................... 5 1.4 Notes ......................................................................................................................................................... 6 2. Components and Features ................................................................................................... 7 2.1 Components and Buttons .......................................................................................................................... 7 2.2 Device Specifications ................................................................................................................................. 8 2.3 Micro SD, SIM card....................................................................................................................................10 2.4 Battery Charging .......................................................................................................................................10 3. UHF RFID........................................................................................................................... 11 4. Other Features .................................................................................................................. 12 4.1 PING tool ..................................................................................................................................................12 4.2 Bluetooth ..................................................................................................................................................13 4.3 GPS ...........................................................................................................................................................14 4.4 Volume setup............................................................................................................................................15 4.5 Sensor .......................................................................................................................................................16 4.6 Keyboard ..................................................................................................................................................17 4.7 Network....................................................................................................................................................18 4.8 Keyboard emulator (optional)...................................................................................................................19 4.9 Call function ..............................................................................................................................................20 Calling numbers ....................................................................................................................................................... 20 Contacts ................................................................................................................................................................... 20 SMS and MMS.......................................................................................................................................................... 20 5. Optional Features ............................................................................................................. 21 5.1 Barcode Scanner (Optional) ......................................................................................................................21 Restrictions: ............................................................................................................................. 23 SAR Information ....................................................................................................................... 24 Simplified EU declaration of conformity ................................................................................... 24 Warranty ................................................................................................................................. 25 WARRANTY ..........................................................................................................................................................25 EXCLUSIONS .........................................................................................................................................................25 RMA PROCEDURE .................................................................................................................................................25 DISCLAIMER OF WARRANTIES ..............................................................................................................................25 LIMITATION OF LIABILITY .....................................................................................................................................25 Pyxis User Guide - Version 0.3.3 1

User Guide Version 0.3.3 07th August 2019 Star Systems International and the Star Systems International logo are trademarks of Star Systems International Ltd. in Hong Kong and other countries. Specifications are subjected to changes without prior notice. Disclaimer and limitation of liability Star Systems International Ltd. shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages about the furnishing, performance, or use of this material. The information in this document is provided “as is” without warranty of any kind - including but not limited to, the implied warranties of merchantability and fitness for a purpose and is subjected to change without notice. The warranties for Star Systems International products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Star Systems International Ltd. This product is not designed, intended, authorized or warranted to be suitable for life support applications or any other life critical applications which could involve potential risk of death, personal injury, property damage, or environmental damage. Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating RFID equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions. A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data. Note: Notes either provide extra information about a topic or contain special instructions for handling a condition or set of circumstances. Pyxis User Guide - Version 0.3.3 2

FCC Compliance This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. .Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .Consult the dealer or an experienced radio/TV technician for help. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. FCC Radiation Exposure Statement . This device was tested for typical body.worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10 mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. RF Exposure Information(SAR) The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device Types HRD23001F (FCC ID: 2AA7KPYXIS-HRD23000) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is1.168 W/kg and for head is 0.24 W/kg Pyxis User Guide - Version 0.3.3 3

1. Introduction 1.1 Intro PYXIS device is a smart mobile PDA that integrated with various features such as wireless communication, data acquisition, wireless transmission, data processing and UHF scanning etc. It is configured with Android OS and it possesses high reliability and expansibility. With a set of advanced data acquisition options, PYXIS can be operated in various industries to acquire precise and abundant datum automatically. Meanwhile, the device can match the options with staffs accordingly. The corporation which deployed PYXIS will realize the deployment work is simple and maintenance work will be remarkably decreased. PYXIS is highly rugged, compact and durable. With IP65 water and dustproof capability, the device has met IEC sealing standard. Therefore, it can be operated by staff such as Vehicle Administration, Inventory Management, Asset Management, Fleet Management etc. Wherever your staff locations are, PYXIS can remain its connectivity with the system to make sure business in high-effective operating. PYXIS mobile data terminal adopted 4G LTE technology to realize multipath communication and calling function for fieldwork, data exchange efficiency has been enhanced simultaneously (Optional). Therefore, PYXIS will bring the largest investment return for enterprises. Pyxis User Guide - Version 0.3.3 4

1.2 CAUTION READ THIS BEFORE USING BATTERY • Do not leave the battery unused for an extended period of time, whether it is in the device or not. If the battery has been used for over 6 months, it should be checked to assure the charging function is working properly or it should be disposed of correctly. • The lifespan of a Li-ion battery is around 2 to 3 years, it can be recharged for approximately 300 to 500 times. (One full battery charge period means completely charged and completely discharged.) • Even when a Li-ion battery is not in use, it will continue to discharge slowly. Therefore, the battery charging status should be checked frequently per recommended practices. • Observe and record the information of any new unused and non-fully charged battery. Based on operating time of new battery and compare with a battery that has been used for long time. According to product configuration and application program, the operating time of battery would be different. • Check battery charging status at regular intervals. • When the battery capacity drops below about 80%, charging time may be increased. • If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery. • Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F). 1.3 Charger The charger model is GME10D-050200FGu, output voltage/current is 5V DC/2A. Pyxis User Guide - Version 0.3.3 5

1.4 Notes 1. Using the incorrect type battery is dangerous and may cause fire or an explosion. Please dispose the used battery according to instructions. 2. The Reader Device and its battery should only be connected to a USB Interface, version 2.0 or higher. Using other types of USB power is not recommended and will void your warranty. 3. The suitable temperature range for this product and accessories is 0-10°C to 50°C. 4. Caution risk of explosion if battery is replaced by an incorrect type. Dispose of any used batteries according to the instructions. Pyxis User Guide - Version 0.3.3 6

2. Components and Features 2.1 Components and Buttons Pyxis has 4 side buttons, 4 main buttons and a trigger on handle, UHF scanning area, 2D scanning module (OPTIONAL), HD camera and flashlight locate on the top. 11 9 10 2 12 3 13 14 4 9 6 7 8 Function Description 1. RGB LED Monitor Display Device 2. Light Sensor, Distance Sensor Light and distance detection 3. Front Camera Photos and Videos record 4. UHF Scanning Module Scanning RFID Tags 5. Menu Display main menu 6. Home Back to main screen 7. Back Return to last step 8. Trigger Start scanning or take photos Two Scanning buttons located on each 9. Scan button side of the Pyxis 10. SIM/SD Card Slot Install SIM card or SD card 11. Barcode Scanner Scan 1D/2D barcode (OPTIONAL) 12. Top Camera, Flashlight Photos and Videos record 13. Power button Press to turn on/off device Custom function which can be defined 14. Setup button by software Pyxis User Guide - Version 0.3.3 7

2.2 Device Specifications Physical characteristics Size 164.2mm*78.8mm*17mm Weight <654g (battery included) Display 5.2 inch, IPS FHD 1920*1080P 4 main keyboards, 1 power button, 2 scan Touch panel buttons, 1 multi-function button Battery Li-ion, rechargeable, 8000mAh Expansion Micro SD card, up to 32 GB Expansion Slot 1 SIM, 1 SIM/Micro SD Audio speaker, 2 microphones, voice call Camera 13MP autofocus camera with flashlight Performance CPU Cortex-A53 1.45GHz Quadcore OS Android RAM 2GB RAM Communication USB2.0, Type-C, OTG Interface ROM 16GB Max. expansion Supports up to 32 GB Micro SD card User environment Operating temp. -10℃ to 50℃ Storage Temp. -40℃ to 70℃ Humidity 5%RH – 95%RH non-condensing Sealing IP65, IEC sealing standard Drop Multiple 1.8m/4.0ft drops to the concrete specification Pyxis User Guide - Version 0.3.3 8

Communication WAN EU（Option）: 2G: 850/900/1800/1900MHz 3G: 850/900/1900/2100MHz 4G: B1, B3, B5, B7, B8, B20, B40 US（Option）: 2G: 850/900/1800/1900MHz 3G: 850/900/1700/1900MHz 4G: B2, B4, B7, B12, B17 CN（Option）: 2G: 900/1800MHz 3G: 900/1900/2000/2100MHz 4G: B1, B3, B5, B38, B39, B40, B41 WLAN IEEE802.11a/b/g/n, embedded antenna, 5 Gigabit WiFi (5G wifi isn’t support hotspot) WiFi 2.4G; max. power 14.69 dBm WiFi 5G - Band1: max. power 14.69 dBm WiFi 5G - Band2: max. power 12.82 dBm WiFi 5G - Band3: max. power 13.08 dBm SRD5.8G; max. power 12.29 dBm WPAN Bluetooth 4.0; max. power 6.16 dBm Data collection Barcode 2D CMOS scanning engine scanning (Honeywell N6603/Zebra SE4710) (Optional) RFID NFC 13.56Mhz 62.57 dBμV/m (3m) -14.23dBμA/m (10m) Developing Environment SDK STAR Systems software develop kit Language Java Develop Eclipse/Android Studio Pyxis User Guide - Version 0.3.3 9

2.3 Micro SD, SIM card 1. Take out the card slot using specified SIM card ejector. 2. Install SIM card/Micro SD in correct direction. 2.4 Battery Charging By using a USB Type-C connector. Please, it is recommended to only use the original adaptor for charging the device. Charging the battery with a power supply adapter not provided/approved by Star Systems may damage your device and/or void your warranty. Pyxis User Guide - Version 0.3.3 10

3. UHF RFID Open App Center in the Applications. Open “UHF” to read and write, kill and lock a UHF transponder/tag. Pyxis User Guide - Version 0.3.3 11

4. Other Features 4.1 PING tool 1. Open “PING” in App Center. 2. Setup PING parameters and select external/internal addresses. Pyxis User Guide - Version 0.3.3 12

4.2 Bluetooth 1. Open “BT Printer” in App Center. 2. In the list of detected devices, click the device that you want to pair with. 3. Select printer and click “Print” to start printing contents. Pyxis User Guide - Version 0.3.3 13

4.3 GPS 1. Click “GPS” in App Center to open GPS test. 2. Setup GPS parameters to access GPS information. Pyxis User Guide - Version 0.3.3 14

4.4 Volume setup 1. Click “Volume” in App Center. 2. Setup volume per user requirements. Pyxis User Guide - Version 0.3.3 15

4.5 Sensor 1. Click “Sensor” in App Center. 2. Setup the sensor per user requirements. Pyxis User Guide - Version 0.3.3 16

4.6 Keyboard 1. Click “Keyboard” in App Center. 2. Setup and test the main value of the device. Pyxis User Guide - Version 0.3.3 17

4.7 Network 1. Click “Network” in App Center. 2. Test WIFI/Mobile signal. Pyxis User Guide - Version 0.3.3 18

4.8 Keyboard emulator (optional) The keyboard emulator can be used in multiple operating background and output formats directly. And it includes Prefix/Suffix/Enter/TAB. Please check the Keyboard emulator manual for more details. Pyxis User Guide - Version 0.3.3 19

4.9 Call function Calling numbers 1. Click icon . 2. Click desired number keys to input phone numbers. 3. Click icon to call. 4. Click icon to end the call. Contacts 1. Click icon to open contacts list. 2. Click icon to add new contacts. SMS and MMS 1. Click to open message window. 2. Click to input message recipient and contents. 3. Click to send out messages. 4. Click to add attachments, pictures or videos. Pyxis User Guide - Version 0.3.3 20

5. Optional Features 5.1 Barcode Scanner (Optional) 1. In App Center, open 2D barcode scan test. (This function will show if your device has the appropriate Barcode Scan Engine.) 2. Press the “SCAN” button or click the scan key to start scanning. “Auto interval” can be adjusted by the user as desired. Caution: Please scan codes in correct orientation otherwise the scanning may failed. 1D barcode: 2D code: Pyxis User Guide - Version 0.3.3 21

Max. radiant power: 0.6mW Wavelength: 655nM IEC 60825-1 (Ed.2.0). 21CFR 1040.10 and 1040.11 standard. Pyxis User Guide - Version 0.3.3 22

Restrictions: AT BE BG HR CY CZ DK EE FI FR DE GR HU IE IT LV LT LU MT NL PL PT RO SK SI ES SE UK This device is restricted to indoor use where operated in the European Community using frequency in 5150MHz-5350MHz to reduce the potential for interference. Pyxis User Guide - Version 0.3.3 23

SAR Information The SAR limit of Europe is 2.0 W/kg. Device types Pyxis has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.219W/kg and when properly worn on the body is 1.216 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0.5cm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 0.5cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements and should be avoided. Simplified EU declaration of conformity Hereby, STAR Systems International Ltd. declares that the radio equipment type Pyxis is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:www.star-int.net Pyxis User Guide - Version 0.3.3 24

Warranty WARRANTY All Hardware Products sold by Star Systems International Limited (SSI) are warranted against defects in material and workmanship under normal use and service for one (1) year from the original date of purchase (the “Warranty”). Any Extended Warranties must be documented on the original invoice as a separate line item. For defects covered by this Warranty, SSI will repair the defect or replace the product, at its sole option and return the product to you. EXCLUSIONS If the defect was caused by any of the following, the Warranty shall not apply and an estimate for repair or replacement will be submitted for your approval prior to work being performed: abuse, mishandling, natural disaster, vandalism, accident, electrostatic discharge damage, failure to follow installation or operating instructions, failure to provide a suitable environment, unauthorized modification of the product modification of the printed circuit board by parties other than SSI, and damage that is caused during shipping for warranty service and any product that is returned with the security seal broken. RMA PROCEDURE For Warranty service, the Customer must comply with Star Systems International Return Materials Authorization (“RMA”) policy, which is published on the Star Systems International website at www.star- int.net and may be updated from time to time. Prior to shipping a product to Star Systems International for warranty inspection, replacement or repair, an RMA number must be obtained from Star Systems International’s RMA department at +852 3691 9925 or by email at support@star-int.net. RMA forms can be downloaded from the Star Systems International website or the Customer can receive the form by email by contacting the RMA department. One RMA form must be used for each RMA submission and the product should be shipped to the address below. For products covered by this Warranty, the Customers are responsible for payment of shipping costs to the Star Systems International repair center and Star Systems International will be responsible for the cost of returning the item. The standard return shipment is “Speed Post”. Any other desired “expedited” or overnight shipping costs for warranty repairs will be the customer’s responsibility. DISCLAIMER OF WARRANTIES Other than set forth above, SSI hereby disclaims all warranties, expressed or implied, including without limitation, the warranties of equipment warranty (rev 2-2017) merchantability, fitness for a particular purpose and noninfringement. LIMITATION OF LIABILITY In no event will SSI be liable for any consequential, indirect, exemplary, special, or punitive damages, whether arising out of contract, tort, negligence, strict liability or otherwise. In no event will Star Systems International’s total cumulative, aggregate liability, whether arising out of contract, tort, negligence, strict liability, or otherwise, exceed the price actually paid by the customer for the product from which the claim arises. This warranty gives the Customer specific legal rights, and the Customer may also have other rights that may vary from local jurisdiction. If the Customer has questions concerning the product or warranty, contact the dealer from which it was purchased. The Customer may also contact Star Systems International at the following address and ask for warranty assistance. Pyxis User Guide - Version 0.3.3 25

About Us STAR Systems International is a market leader providing solutions including RFID transponders, readers and professional consulting services for Auto ID & Vehicle Identification Applications. STAR Systems leverages technical implementation expertise, training and support to ensure customer success. “Your Success Is Our Vision”. STAR Systems International’s focus is providing best-in-class technologies for Smart City Initiatives including; Electronic Tolling (ETC), Electronic Vehicle Registration (EVR), Fleet Management, Parking and Secure Access Control applications. STAR Systems International’s mission is to enable our partners and users to experience high- performance and reliable integrated solutions which are key elements of any modern Smart City initiatives. For more information on STAR Systems International, please visit our website www.star-int.net Pyxis User Guide Version 0.3.3 Copyright © 2019 SSI reserves the right to change specifications without prior notice


Document Created: 2019-10-12 09:34:01
Document Modified: 2019-10-12 09:34:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC