Analysis Report

FCC ID: 2AA7KDORADOBT

RF Exposure Info

Download: PDF
FCCID_2181389

                     INTERTEK TESTING SERVICES
                               Analysis Report

   The equipment under test (EUT) is a RFID data collector. The EUT was
powered by a 3.7 VDC fully charged Li-ion rechargeable battery which is
charged by USB power adapter with AC 120V, 60Hz input during the test. For
more detail information pls. refer to the user manual.

For BT(4.0) function and operating frequency is 2402-2480MHz:
Modulation Type: GFSK.
Antenna Type: Integral antenna
Antenna Gain: 2.0dBi
The nominal radiated output power (e.i.r.p) specified: 0dBm (Tolerance: +/-
3dB)
The nominal conducted output power specified: -2dBm (Tolerance: +/- 3dB)

According to the KDB 447498:
    The maximum radiated emission for the EUT is 96.8dBμV/m at 3m in the
    frequency 2.440GHz
    = [(FS*D) ^2 / 30] mW
    = 1.57dBm which is within the production variation.

     The minimum radiated emission for the EUT is 95.3dBμV/m at 3m in the
     frequency 2.480GHz
     = [(FS*D) ^2 / 30] mW
     = 0.07dBm which is within the production variation.

     The maximun conducted output power specified is 1dBm = 1.26mW
     The source- based time-averaging conducted output power
     = 1.26 * Duty cycle mW= 1.26 mW

     The SAR Exclusion Threshold Level:
     = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz)
     = 3.0 * 5 / sqrt (2.480) mW
     = 9.5 mW

     Since the source-based time-averaging conducted output power is well
     below the SAR low threshold level, so the EUT is considered to comply
     with SAR requirement without testing.

Transmitter Duty Cycle Calculation
     The EUT transmit continuously during the test, the duty cycle is 1.
     This requirement is according to KDB 865664 D02

FCC ID: 2AA7KDORADOBT


For RF ID function and operating frequency is 902.75-927.25MHz
Modulation Type: DSB-ASK
Antenna Type: Integral antenna
Antenna Gain: 1.2dBi
The Peak nominal radiated emission power (e.r.p) specified: -17.0dBm (Tolerance:
+/- 3dB)

The Peak nominal conducted output power specified: -16.05dBm (Tolerance: +/- 3dB)

According to the KDB 447498:
    The maximum radiated emission for the EUT is 78.8dBμV/m at 3m in the
    frequency 914.75MHz
    = [(FS*D) ^2 / 30] mW-2.15dB
    = -18.58dBm which is within the production variation.

     The minimum radiated emission for the EUT is 77.6dBμV/m at 3m in the
     frequency 902.75Hz
     = [(FS*D) ^2 / 30] mW-2.15dB
     = -19.78dBm which is within the production variation.

     The maximun conducted output power specified is -13.05dBm = 0.05mW
     The source- based time-averaging conducted output power
     = 0.05 * Duty cycle mW= 0.05 mW

     The SAR Exclusion Threshold Level:
     = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz)
     = 3.0 * 5 / sqrt (0.92725) mW
     = 15.58 mW

     Since the source-based time-averaging conducted output power is well
     below the SAR low threshold level, so the EUT is considered to comply
     with SAR requirement without testing.

Transmitter Duty Cycle Calculation
     The EUT transmit continuously during the test, the duty cycle is 1.
     This requirement is according to KDB 865664 D02




FCC ID: 2AA7KDORADOBT


   For both BT(4.0) and RFID are simultaneous transmissions estimated

   According to the KDB 447498:

   When both BT(4.0) and RFID are simultaneous transmissions, the
   maximun conducted output power for BT(4.0) is 1dBm.

   In the simultaneous transmissions, BT(4.0)’s estimated SAR values:
    = (max. power of channel, including tune-up tolerance, mW) / (min. test
      separation distance, mm) * [sqrt(freq. in GHz)/7.5] W/kg
    = 1.26 / 5*[sqrt (2.480) / 7.5] W/kg
   = 0.053 W/kg

   When both BT(4.0) and RFID are simultaneous transmissions, the
   maximun conducted output power for RFID is -13.05dBm

   In the simultaneous transmissions, RFID’s estimated SAR values:
    = (max. power of channel, including tune-up tolerance, mW) / (min. test
      separation distance, mm) * [sqrt(freq. in GHz)/7.5] W/kg
    = 0.05 / 5*[sqrt (0.92725) / 7.5]
   = 0.001 W/kg

   Sum of 1-g SAR of all simultaneously transmitting antennas in an
   operating mode:
   BT(4.0)’s estimated SAR values + RFID’s estimated SAR values
   = 0.053 + 0.001 W/kg
   = 0.054W/kg

   The simultaneous transmissions SAR Evaluation: ≤ 0.4 W/kg

   This requirement is according to KDB 865664 D02




FCC ID: 2AA7KDORADOBT



Document Created: 2014-01-29 15:57:22
Document Modified: 2014-01-29 15:57:22

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC