2AA7C-REDLIGHTV4

FCC ID

Equipment: Wi-Fi & Bluetooth Module

Buzz Products PTY LTD -REDLIGHTV4

18 Studley Street, Abbotsford Victoria, N/A 3067 Australia

Application
Frequency Range
Final Action Date
Granted
ttP6/kspF7Xmi4IMMeAlsg==
2402.0-2480.0
2018-12-26
APPROVED
ttP6/kspF7Xmi4IMMeAlsg==
2412.0-2462.0
2018-12-26
APPROVED
7v+57xUh1KpOf04xiUnv9A==
2402.0-2480.0
2018-12-26
APPROVED
File NameDocument TypeDateDirect
FCC ID LabelID Label/Location Info 2018-12-26 00:00:00 pdf
Ext PhotosExternal Photos 2018-12-26 00:00:00 pdf
Module Approval LetterCover Letter(s) 2018-12-26 00:00:00 pdf
Authorization Letter from Original GranteeCover Letter(s) 2018-12-26 00:00:00 pdf
Change in ID Request LetterCover Letter(s) 2018-12-26 00:00:00 pdf
POACover Letter(s) 2018-12-26 00:00:00 pdf

Application Details:

EquipmentWi-Fi & Bluetooth Module
FRN0023048960
Grantee Code2AA7C
Product Code-REDLIGHTV4
Applicant BusinessBuzz Products PTY LTD
Business Address18 Studley Street , Abbotsford Victoria,N/A Australia 3067
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantSimon Farrell – Director- Product Development & Production
Applicant Phone
Applicant Fax61384129001
Applicant Email[email protected]
Applicant MailStop
Test FirmBay Area Compliance Laboratories Corp. (Kunshan)
Test Firm ContactMr. John Chan
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified BySimon Farrell –
Comment [7v+57xUh1KpOf04xiUnv9A==]: Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.
Comment [ttP6/kspF7Xmi4IMMeAlsg==]: Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. The device supports 20 MHz and 40 MHz bandwidth modes.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC