Test Report

FCC ID: 2AA6ZCR1

Test Report

Download: PDF
FCCID_2100193

Shenzhen CTL Electromagnetic Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-89486194-805 MPE TEST REPORT Report Reference No......................: CTL1308301369-WM Compiled by ( position+printed name+signature)..: File administrators Jennifer NI Name of the organization performing the tests Test Engineer Tracy Qi ( position+printed name+signature)..: Approved by ( position+printed name+signature)..: Manager Tracy Qi Date of issue.....................................: Sept 07, 2013 Representative Laboratory Name .: Shenzhen CTL Electromagnetic Technology Co., Ltd. Address.............................................: Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 Test Firm..........................................: Bontek Compliance Testing Laboratory Ltd Address.............................................: 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen, China Applicant’s name............................: CaptionCall, LLC Address.............................................: 4215 South Riverboat Road, Salt Lake City, UTAH 84020. USA. Test specification: Standard ...........................................: FCC Per 47 CFR 2.1091(b) TRF Originator..................................: Shenzhen CTL Electromagnetic Technology Co., Ltd. Master TRF.......................................: Dated 2011-01 Shenzhen CTL Electromagnetic Technology Co., Ltd. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Electromagnetic Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Electromagnetic Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader’s interpretation of the reproduced material due to its placement and context. Test item description .................... : Router FCC ID…………………………….…..: 2AA6ZCR1 Trade Mark .......................................: N/A Model/Type reference.......................: CR1 Power Supply…………………………: DC 5V from adapter from AC120V/60Hz Work frequency ................................: 802.11b/g/n(20MHz): 2412~2462MHz 802.11n(40MHz):2422~2452 Type of modulation ...........................: 802.11b DSSS, 802.11g/n: OFDM Data Rate..........................................: 802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n: up to 135 Mbps Antenna Gain ...................................: 2dBi Antenna type ....................................: Undetachable Result................................................: Positive

V1.0 Page 2 of 7 Report No.: CTL1308301369-WM Test Report Sept. 07, 2013 Test Report No. : CTL1308301369-WM ______________________________________________________________________________________________ Date of issue Equipment under Test : Router Model /Type : CR1 Applicant : CaptionCall, LLC Address : 4215 South Riverboat Road, Salt Lake City, UTAH 84020. USA. Manufacturer : SHENZHEN MTN ELECTRONICS CO.,LTD. Address : MTN Industrial Park, NO.3 Fuhua Road, Pingxi Neighborhood, Longgang District, Shenzhen, China Test Result according to the Positive standards on page 4: The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory.

V1.0 Page 3 of 7 Report No.: CTL1308301369-WM Content 1. SUMMARY ............................................................................. 4 1.1. EUT configuration 4 1.2. Equipment Under Test 4 1.3. Description of the test mode 4 1.4. NOTE 4 2. TEST ENVIRONMENT ............................................................... 5 2.1. Address of the test laboratory 5 2.2. Environmental conditions 5 2.3. Statement of the measurement uncertainty 5 3. METHOD OF MEASUREMENT ..................................................... 6

V1.0 Page 4 of 7 Report No.: CTL1308301369-WM 1. SUMMARY 1.1. EUT configuration The following peripheral devices and interface cables were connected during the measurement: ● - supplied by the manufacturer o - supplied by the lab 1.2. Equipment Under Test Power supply system utilised Power supply voltage : „ 120V / 60 Hz o 115V / 60Hz o 12 V DC o 24 V DC „ Other (specified in blank below) DC 5V from adapter 1.3. Description of the test mode IEEE 802.11b/g/n: Thirteen channels are provided to the EUT,but only eleventh channels used for USA. Channel Frequency(MHz) Channel Frequency(MHz) 1 2412 8 2447 2 2417 9 2452 3 2422 10 2457 4 2427 11 2462 5 2432 6 2437 7 2442 1.4. NOTE The EUT is an 802.11b/g/n Router. The functions of the EUT listed as below: Test Standards Reference Report WLAN 802.11b/g, 802.11n FCC Part 15 Subpart C CTL1308301369-WF (Section15.247) WLAN 802.11b/g, 802.11n FCC Per 47 CFR 2.1091(b) CTL1308301369-WM The frequency bands used in this EUT are listed as follows Frequency Band(MHz) 2400-2483.5 5150-5350 5470-5725 5725-5850 802.11b √ - - - 802.11g √ - - - 802.11n(20MHz) √ - - - 802.11n(40MHz) √ - - - Modulation Mode TX Function 802.11b 1 TX 802.11g 1 TX 802.11n(20MHz) 1 TX 802.11n(40MHz) 1 TX

V1.0 Page 5 of 7 Report No.: CTL1308301369-WM 2. TEST ENVIRONMENT 2.1. Address of the test laboratory Bontek Compliance Testing Laboratory Ltd 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen, China There is one 3m semi-anechoic chamber and two line conducted labs for final test. The Test Sites meet the requirements in documents ANSI C63.4 and CISPR 22/EN 55022 requirements 2.2. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Temperature: 15-35 ° C Humidity: 30-60 % Atmospheric pressure: 950-1050mbar 2.3. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 „Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements“ and is documented in the Bontek Compliance Testing Laboratory Ltd quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for Bontek laboratory is reported: Test Range Measurement Notes Uncertainty Radiated Emission 30~1000MHz 4.10dB (1) Radiated Emission 1~12.75GHz 4.32dB (1) Conducted Disturbance 0.15~30MHz 3.22dB (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2.

V1.0 Page 6 of 7 Report No.: CTL1308301369-WM 3. Method of measurement 3.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. 3.2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure F=frequency in MHz *=Plane-wave equivalent power density 3.3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna is 2.0 dBi, the RF power density can be obtained.

V1.0 Page 7 of 7 Report No.: CTL1308301369-WM TEST RESULTS For 802.11 b Test Minimum Output Output Antenna Power Power Test Frequency Separation Power Power Gain Density Density Results (MHz) Distance (dBm) (mW) (Nemeric) Limit At 20 cm (cm) (mW/cm2) (mW/cm2) 2412 20.00 11.54 14.2561 1.5849 1.000 0.0045 Pass 2437 20.00 11.01 12.6183 1.5849 1.000 0.0040 Pass 2462 20.00 11.34 13.6144 1.5849 1.000 0.0043 Pass For 802.11 g Test Minimum Output Output Antenna Power Power Test Frequency Separation Power Power Gain Density Density Results (MHz) Distance (dBm) (mW) (Nemeric) Limit At 20 cm (cm) (mW/cm2) (mW/cm2) 2412 20.00 10.44 11.0662 1.5849 1.000 0.0035 Pass 2437 20.00 9.95 9.8855 1.5849 1.000 0.0032 Pass 2462 20.00 10.16 10.3753 1.5849 1.000 0.0033 Pass For 802.11 n (20MHz) Test Minimum Output Output Antenna Power Power Test Frequency Separation Power Power Gain Density Density Results (MHz) Distance (dBm) (mW) (Nemeric) Limit At 20 cm (cm) (mW/cm2) (mW/cm2) 2412 20.00 9.87 9.7051 1.5849 1.000 0.0031 Pass 2437 20.00 10.41 10.9901 1.5849 1.000 0.0035 Pass 2462 20.00 9.98 9.9541 1.5849 1.000 0.0032 Pass For 802.11 n (40MHz) Test Minimum Output Output Antenna Power Power Test Frequency Separation Power Power Gain Density Density Results (MHz) Distance (dBm) (mW) (Nemeric) Limit At 20 cm (cm) (mW/cm2) (mW/cm2) 2422 20.00 13.36 21.6770 1.5849 1.000 0.0069 Pass 2437 20.00 13.06 20.2302 1.5849 1.000 0.0065 Pass 2452 20.00 13.09 20.3704 1.5849 1.000 0.0065 Pass 4.Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 (b) for the controlled RF Exposure. .....................End of Report.......................


Document Created: 2013-10-22 18:58:38
Document Modified: 2013-10-22 18:58:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC