Users Manual


Users Manual

Download: PDF


Safety & Cautions                             3
[Part I] Product Outlook                      7
       1.1 X2000
       1.2 Joystick Console                   9
[Part II] Main key function                  11
       2.1 Main UI
       2.2 Live view Screen Overlays         12
       2.2 Full Screen
       2.3 Zoom in / Out
       2.4 Brightness Control
       2.5 Snapshot
       2.6 Video Recording                   13
       2.7 Album
       2.8 Album-Photo annotation function   14
       2.9 Album-Compare function            15
[Part III] Touch-screen key functions        17
        3.1 Function list
        3.2 Wireless function                18

[Part IV] Main MENU settings   20
        4.1 Main UI
        4.2 Info               21
        4.3 SD card status
        4.4 Language           22
        4.5 Time setting
        4.6 Auto power off     23
        4.7 Watermark
        4.8 OSD                24
        4.9 Resolution
        4.10 USB               25
Specifications                 26

    Safety & Cautions

►    Safety Conformances

     The Videoscope System is in conformance with the following standards:
           •   2014/30/EU Electromagnetic Compatibility Directive

     The X2000 Videoscope System is in conformance with the requirements of the European
     law on the Restriction of Hazardous Substances (RoHS) directive. This means that our
     product is both lead-free and without the hazardous substances either in the
     manufacturing process or in the final product

     This equipment has been tested and found to comply with the limits for a Class B
     digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
     provide reasonable protection against harmful interference in a residential installation.
     This equipment generates, uses and can radiate radio frequency energy and, if not
     installed and used in accordance with the instructions, may cause harmful interference
     to radio communications. However, there is no guarantee that interference will not
     occur in a particular installation. If this equipment does cause harmful interference to
     radio or television reception, which can be determined by turning the equipment off
     and on, the user is encouraged to try to correct the interference by one or more of the
     following measures:
     -Reorient or relocate the receiving antenna.
     -Increase the separation between the equipment and receiver.
     -Connect the equipment into an outlet on a circuit different from that to which the
     receiver is connected.
     -Consult the dealer or an experienced radio/ TV technician for help.
     Any changes or modifications not expressly approved by the grantee of this device
     could void the user's authority to operate the equipment.

     RF exposure warning
     This equipment must be installed and operated in accordance with provided
     instructions and the antenna(s) used for this transmitter must be installed to provide
     a separation distance of at least 20 cm from all persons and must not be co-located
     or operating in conjunction with any other antenna or transmitter. End-users and
     installers must be provide with antenna installation instructions and transmitter
     operating conditions for satisfying RF exposure compliance.



We suggest you read the following statements carefully before using the system.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.

                        •   Risk of explosion if battery is replaced by an incorrect type.
                        •   Dispose of used batteries according to the instructions.
                        •   Never replace the battery by yourself.

    WARNING       If this product is used without observing the information given under
                  this symbol, it might cause injuries or loss of life.

     CAUTION      If this product is used without observing the information given under
                  this symbol, it might cause damage to this product.

                        •   Do not use this system in explosive environments such as
                            gasoline or alcohol storage tank.
                        •   Do not use this system near flammable gases.

                        •    Avoid looking at the probe head while LED is on.

                        •   Please refer to Chemical resistance below. Contact the store
                            you purchased for unsure chemical solutions for further
                  Chemical Resistance
                        •   Water
                        •   Brake fluid
                        •   Gasoline
                        •   Diesel fuel
                        •   Transmission fluid


CAUTION- Camera High Temperature warning

- Prevent using the camera head in over 100oC environment.
- The base unit shows 3 levels (60oC/80oC/100oC) camera temperature
warning signals. Take out the tube when the 100oC warnings signal pop up.


[Part I] Product Outlook
• 1.1      X2000 Base unit





                             POWER INDICATION

               SUN VISOR





           AV OUT

       DC IN



                     THREADED HOLE FOR    RECHARGEABLE
                     TRIPOD MOUNT         LI BATTERY INSIDE


• 1.2   Joystick Console

         SHAFT LOCK

         2 ROTATE
         3 PARTICLE FREE

                                 SNAP / FREEZE


Frequent operations

Generally, use your thumb to control the joystick, and use other fingers to
grip the handle.

The joystick operations

      Lock mode: The articulation angle can be fixed by every joystick movement.

      Capture images
             •  Press        to capture desired image.
             •  Hold         to keep freezing the frame.
      Adjust brightness
             •  Press        increase brightness.
             •  Press        decrease brightness.

                                               - 10 -

[Part II] Main key function
• 2.1   Main UI

                        SNAP           Take pictures

                        RECORD         Video record

                        UP             Zoom in

                        RIGHT          Increase brightness

                        HOME           Switch to full screen / back to live view

                        LEFT           Decrease brightness

                        DOWN           Zoom out

                        POWER          Turn on / off the system

                        ALBUM          Quick enter album mode

                        SETUP          Change language, date, and other system settings

                              - 11 -

Live View screen UI
• 2.2   Live view Screen Overlays

• 2.2  Full Screen
  Press the <Home> button.
• 2.3 Zoom in/Out
  Press the <up> / <down> button. Digital zoom 3x adjustment.
• 2.4 Brightness Control
  Press the <right> / <left> button. 10 levels adjustment.
• 2.5 Snapshot
  Press the <Snap> button.

                                    - 12 -

• 2.6   Video Recording

Press the <Record> button to start/stop recording video.
During recording, press the <Snap> button can take and save the real
time screenshot image photo.

• 2.7   Album
• 2.7.1 Photo Gallery: touch [video] button to view video gallery.

• 2.7.2 Video Gallery: touch [photo] button to view video gallery

                                   - 13 -

• 2.7.3 Single photo view:

touch [video] button to view single video file.
The [Add Note] and [compare] instruction is in next section.

• 2.7.4 Single video view:

touch [photo] button to view single photo file. Touch any position of
the screen to play / pause.

                                    - 14 -

• 2.8   Album --Photo annotation function
 The X2000 system allows user add maximum 10 notes on a photo.
 Each note can key in maximum 24 characters. The edit steps as follow:

• 2.8.1 Add one note:

                [Add Note] -> [key in]-> [Done]. Then a note can be done.

• 2.8.2 Add more note:

                [Keypad] -> [key in]-> [Done].

                                       - 15 -

• 2.8.3 Move note position.
  Touch any note been made on screen then it shows a green frame. The note frame
  can be dragged to any position you want to mark on the photo.
• 2.8.4 Erase note
    Touch any note been made on screen then it shows a green frame. Touch the [Erase]
  to delete the note frame.
  During keying any note, use the [Erase] function to erase all characters.
• 2.8.5 Save
    [Save] Please make sure saving the photo with notes you made. The system creates
  a new file in the album. The original photo will not be covered.

• 2.9   Album –Compare function
 Touch the “Compare” key to compare the live view with any stored image file.

          To move the compared photo to target position.

          To switch the left / right side viewing window.

          To replace another compared photo.

 Push the [Home] key to go back to live view.
 Concerning the necessarily usage of accessing stored images files, the
 [wireless] and [compare] functions will be disable when there is no SD card
 installed in console.

                                        - 16 -

[Part III ] Touch-screen key functions

• 3.1      Function list

 Function                  Button   Description

 Boost                              Light enhanced Mode
 Light Off                          LED off
 Mirror                             Mirror image
                                    The screen will display both front view and side view
 Dual View
                                    ( when using dual view mirror )
 Compare                            Compare stored image with live view
 Compare Move                       Moving the stored pic
 Compare Switch                     Switching compared windows position
                                    Replace the photo in the comparison window from SD
 Compare Replace
 Rotate                             Rotate image
 Anti Glare                         Anti reflection
 Particle Free                      Dust elimination ( when using side view mirror )
 Grid                               To measure the size of object
 Clarity                            Sharpening image edge
 Negative                           Image contrast
 White Balance                      Hue adjustment

                                              - 17 -

• 3.2    Wireless function
• 3.2.1 Enable wireless

 Touch           →

 In a few seconds, the       indicator shows up, then the system is ready to

 be searched and connected by mobile devices.

• 3.2.2 Wi-Fi connection with mobile devices

 Open your mobile Wi-Fi setting and search the system SSID. The SSID and
 password can be found in the <MENU> / <info.>.
 Connect the system with your mobile device.
  - Typically, the Wi-Fi system will be added to your favorite Wi-Fi
    network list after first time connecting. The favorite Wi-Fi network
    will remember the SSID/password.
  - The main system allows 1 console to 1 mobile connection
   When use a new mobile device to connect the system, please check
   there is not any existing mobile device enabling Wi-Fi and connect to
   the system. It may cause the connecting step being rejected then fail.

• 3.2.3 Live share and access the image of the system.

 Launch the “VideoscopeNow” APP.
 When the system start streaming image to mobile APP, the wireless
 indicator change will to blue color .


                                      - 18 -

    -   MITCOPR provide the “VideoscopeNow” APP for X2000 wireless
        ‘VideoscopeNOW’ is a tool specifically designed industrial videoscopes
        that can share the live view from the main portable console system
        through Wi-Fi connection. It can also act as a remote controller to
        make the console taking photos or recording clips. In the APP, user can
        link to the system to access the album and download the photos/clips
        on the local mobile devices.
    -   Learn detail instruction by the <VideoscopeNow user guide>
    -   In APP preview / album mode, the main system will shut down the
        console’s live view image and main key functions to avoid control
        operation conflicts and keep data download performance. The monitor
        show a data transfer status.

                                    - 19 -

• 4.2   Info.

 Include firmware information.
   - Current version
   - Wi-Fi SSID
   - Wi-Fi password
   - Insert tube type

• 4.3   SD card status

                                 - 21 -

• 4.4   Language

• 4.5   Time setting

                       - 22 -

• 4.6   Auto power off

• 4.7   Watermark
  - On/off switch for timestamp and watermark on snap shot photos.
  - Timestamp and Watermark position are adjustable to 4 corners of the photos.
  - The Watermark logo can be replaced. (*Put the logo file in SD card. *File
    format: 160*160, .JPG)

                                    - 23 -

• 4.8   OSD

   - AUTO HIDE of the OSD (On-Screen Display) function bars on 2 sides.
   - The transparency of the function bars are 4 levels adjustable.

• 4.9   Resolution

   - Snap shot photo resolution options:
     (1)FINE mode: 2560*1440 ; (2)STANDARD mode:1280*720

                                   - 24 -

• 4.10   Auto power off

  - When the USB port is connected to PCs, choose output to be:
    (1)SD card reader ; (2) Camera.

                                 - 25 -


Display                           7" LCD, Resolution 1024x600
                    AC adapter:   100V~240V, 12V 2.5A. 50~60Hz

Power Supply                      Rechargeable Li Battery 3.6V 9800mAH, approximately
                    BATTERY       operation time: 4hrs, charging time: 2.5hrs.
                                  Quick charge: 12V, 2A approximately 2hrs (80% capacity)
                                  TYPE D; HDMI 1.4 transmitter with 3D format and CEC
Video Output                      USB TYPE C, supporting USB full-speed and high-speed data
                    Wi-Fi         IEEE802.11B/G/N
                                  in air 0~45°C
Operating temperature             with AC power adapter: 0~40°C
                                  charging temp: 0~45°C
Drop resistance                   1m
Relative humidity                 Max 95% non-condensing
                                  in air 0~45°C
Operating temperature             with AC power adapter: 0~40°C
                                  charging temp: 0~45°C
Relative humidity                 Max 95% non-condensing
Dust proofing and water proofing IP57
Insert Tubes interchangeability   6.0mm HD series; MX3.9mm series

                                             - 26 -

                                     Software Features

Image features                    Digital zoom 3X, 10 steps brightness control
Sharpness control                 Clarity - on/off
Annotation                        10 text annotation (24 characters)
Timestamp / watermark             For snapshot / video recording (on/off)
Image management                  User define pic / video folder available
                                  Light boost, light off, mirror, grid, compare, wireless, particle
Image display functions
                                  free, dual view, light direction, negative, auto whie balance
                                  - Manual adjustable (default, warm, cold, custom)
White balance
                                  - Auto calibration

                                  Recording Management

Storage media                     SDHC up to 32G
Overlay                           YY/MM/DD h:m, battery capacity
Thumbnail image display           9 grids album mode
                    Resolution    2560x1440 (S-HD); 1280x720 (HD)
Still image         Recording
                    Resolution    1920x1080
Video                             .mov/H2.264
                    Audio input   Built-in microphone (on/off)
Frame rate                        30FPS

                                            - 27 -

                                6.0mm 360 Articulation Probe

Joystick console Dimensions (WxDxH)       139.4x193x84.2mm (w/o SR and insert tubes)
Net weight                                2m:770g/ 3m:866g (approximately)
Joystick console buttons                  Brightness +, Brightness -, snapshot / record
Lock and move                             Lock / unlock switch on console
Probe head diameter                       6.0mm
Probe length                              2m / 3m
Probe head material                       Stainless Steel
Probe material                            Tungsten braid
Prove head length                         19.3mm
Direction of View                         Front view
Field of View (FOV)                       90°
Depth of Field (DOF)                      10mm~100mm
Illumination                              Front / Side LEDs
Articulation angle (up/down/right/left)   2m, 3m full ways ≥120°
                                          In air: -10~100°C
Operating temperature
                                          In water: 10~30°C
                                          Joystick console: IP 54
Dust proofing and water proofing
                                          Insert Tube: under water 1m for 30 minutes
Relative humidity                         Max 95% non-condensing
                                          Operable when exposed to machine oil, light oil or 5%
Liquid resistance
                                          salinne solution

                                                - 28 -



HDMI cable (AV-out)       1.8m, HDMI 1.4a, D TYPE
USB cable (data transfer) 1m, type C to standard type A
trolley case              HDPE EVA with storage reel
SD card                   16G
DC power adapter          100V~2401V, 12V 2.5A 50~60 Hz
DC-in cable               1m, USB-DC jack
                          Grip material: Rubber/ Aluminum/ Plastic
                          Tube material: Stainless steel
                                  for 6.0mm probe:                   for 3.9mm probe:
Rigid sleeve
                          OD: 8mm / ID: 7mm                OD: 6mm / ID: 5mm
                          Protection ring: OD: 10mm        Protection ring: OD: 8mm
                          extension joint ringL OD: 11.2mm extension joint ringL OD: 10mm
Side-view mirror          6.0mm
Shoulder strap            Polyester
Hand strap                Polyester
Sun visor                 Steel / Plastic

                                               - 29 -


2F., No.75, Wenhua 1st Rd., Guishan, Taoyuan 333, Taiwan
        T +886-3-328-7177 F +886-3-328-7176

                                           @   website:

Document Created: 2019-08-08 09:49:29
Document Modified: 2019-08-08 09:49:29

© 2019
This site is not affiliated with or endorsed by the FCC