Modular Approval Request_revised1019

FCC ID: 2AA53-LCM3

Cover Letter(s)

Download: PDF
FCCID_3610709

Request for Modular Approval FCC ID: 2AA53-LCM3 Item Requirements EUT 1 Have its own RF shielding Device is equipped with metal shielding to cover RF section. Refer to external photos. 2 Have buffered modulation/data All inputs to the modules are buffered through logic and microprocessor inputs (if such inputs are provided) inputs. 3 Have its own power supply regulation Module chipset incorporates voltage regulation to transceiver circuitry 4 Meet the antenna requirements of the device has a PCB/trance antenna of non-replaceable section 15.203 5 Demonstrate compliance in a Device is tested in a test fixture in a standalone configuration stand-alone configuration 6 The licensed module must have a FCC FCC ID label format will be included in the filling. Host ID label will be ID label on the module itself. That FCC displayed on the host system. ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains “FCC ID: 2AA53-LCM3” 7 The module must comply with all Please refer to “User Manual” Exhibit specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements. 8 The module must comply with RF RF exposure evaluation is exempted exposure requirements. See FCC because of maintain a distance of 20cm Rules. Spread Spectrum transmitters must comply with RF exposure limits in 15.247. Thank you for your attention to this matter. Yours Sincerely, Ivy Zhu, Certification Manager


Document Created: 2017-10-19 11:08:41
Document Modified: 2017-10-19 11:08:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC