User Manual

FCC ID: 2AA2X-15000223

Users Manual

Download: PDF
FCCID_4384472

CONTENTS CX FLEX™ SINGLE-POWER PRODUCT MANUAL Product Manual for CX FLEX™ Single-Power Contents 1. Materials in Box 2 2. Installation 2 3. Key Whitelist 3 4. Merchandising 3 5. Managing Alarms 4 6. Cable Removal 4 7. Remerchandising 4 8. Adding New User Keys 5 9. Deleting Whitelist 5 10. LED Status Indicators 6 11. Dimensions 8 12. FCC and ISED Statement 9 DO NOT REMOVE FROM STORE For additional support, please reach out to our Contact Center at 800-426-6844 www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 1

MATERIALS IN BOX CX FLEX™ SINGLE-POWER PRODUCT MANUAL Optional Power Supply CX FLEX™ (400-00054) Single-Power Barrel Barrel Male End Female End INSTALLATION 1 Clean the desired surface with an alcohol pad allow it to 2 Feed power cable through hole in fixture (if needed), completely dry. Peel the red film from the VHB adhesive. and press down on the base plate for 10 seconds for full VHB contact. Allow 24 hours for full VHB adhesion. 3a Use the individual power supply and plug it into 3b Alternately, use the Power Supply provided with the nearest outlet. Use an outlet installed near the the product you are intending to secure, with the equipment that is easily accessible. appropriate adapter. Use only certified AC main power supply adapters compliant with Limited Power Source (LPS); use of other power supply may cause malfunctions and electrical hazard. www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 2

KEY WHITELIST CX FLEX™ SINGLE-POWER PRODUCT MANUAL 1 Place Authorization Card over the 2 Place the User Key over the RFID 3 To close the whitelist mode, place RFID icon to register to system. icon you want to add. the Authorization Card over the LED will be solid blue. RFID icon. Whitelist mode will end If successful  unit beeps 2 times automatically after 3 minutes of no If unsuccessful  unit beeps 4 use. LED will be flashing white. times (retry) Repeat process for all User Keys until they are successfully added. System must be disarmed to perform this operation. MERCHANDISING 1 Plug the USB-C end of the sensor into the CX Flex until it 2a USB-C Sensor: Insert the other end of the cable into clicks. the device. click 2b Flexi-Disc Sensor: Peel the red film from the VHB 3 System will auto-arm after 1 minute, or arm adhesive and press firmly onto the product for 1 immediately by holding a whitelisted User Card over minute if the product surface is curved, or 30 seconds the RFID Icon. if it is flat. www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 3

MANAGING ALARMS CX FLEX™ SINGLE-POWER PRODUCT MANUAL 1 To silence an alarm, hold the user card over the RFID icon. To disarm after silencing an alarm, hold the user card over the RFID icon for 5 seconds. CABLE REMOVAL 1 Insert a corner of the RFID card into the slot and press 2 Remove the cable. down until the cable ddetaches. REMERCHANDISING 1 From an armed state, place the 2 Insert new cable until it clicks. 3 Re-arm by holding user card over user key over the RFID icon to RFID icon or system will auto-arm disarm the system. LED will be after 1 minute. flashing white. Then remove the cable. click www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 4

ADDING NEW USER KEYS CX FLEX™ SINGLE-POWER PRODUCT MANUAL 1 From an armed state, place the user key over the RFID 2 Place Authorization Card over the RFID icon. Follow Key icon to disarm the system. LED will be flashing white. Whitelist process starting on page 3. DELETING WHITELIST (This will delete all User Keys from the system.) 1 From an Armed state, place the 2 Hold down the Authorization Card 3 Place the Authorization Card over User Key over the RFID icon to for 5 seconds, LED will be solid the RFID icon AGAIN while LED is disarm the system. LED will be yellow. yellow. flashing white. If successful  unit beeps 2 times and the LED will turn solid green If unsuccessful  unit beeps 4 times (retry) www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 5

LED STATUS INDICATORS CX FLEX™ SINGLE-POWER PRODUCT MANUAL Visual Reference System Status Condition Solution LED is solid white. Armed System is armed. LED is flashing white. Disarmed System is disarmed and is ready to merchandise or re-arm. LED is flashing red and white. Alarm System is alarming and requires immediate attention. System has no whitelist or Authorization Card. Follow key LED is flashing green. Factory Reset whitelist process. System has an Authorization Card, but does not have any LED is solid green. Ready to Whitelist User Keys added. Follow key whitelist process. www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 6

LED STATUS INDICATORS CX FLEX™ SINGLE-POWER PRODUCT MANUAL Visual Reference System Status Condition Solution System has gone into overcurrent protection. Unplug any LED is solid blue. Overcurrent when armed product which may be drawing too much power. System has gone into overcurrent protection and user has LED is flashing blue. Overcurrent when disarmed disarmed the system. Unplug any product which may be drawing too much power. The system will self-heal. Delete Whitelist Mode (If using LED is solid yellow. System is deleting whitelist. Wait until complete. Authorization Card) WARNINGS 1. For indoor use only, shall not be exposed to dripping or splashing. 2. Do not expose to excessive heat sources, sunshine, fire or the like. 3. The socket-outlet shall be installed near the equipment and shall be easily accessible. 4. No user replaceable parts inside, refer servicing to manufacturer specified agency or qualified service personnel. 5. Only use accessories/battery specified by the manufacturer. Disposal: All electrical and electronic products including batteries should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 7

DIMENSIONS CX FLEX™ SINGLE-POWER PRODUCT MANUAL 2.36” 1.09” 1.87” 18” www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 8

FCC AND ISED STATEMENT CX FLEX™ SINGLE-POWER PRODUCT MANUAL FCC ID: 2AA2X-15000223 Model: CX Flex Single-Power FCC Statement This device complies with Part 15 of the FCC Rules. Caution: If any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. The RF Exposure Compliance distance is 20 millimeters. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. ISED Certification Number: 24439-15000223 Model: CX Flex Single-Power ISED Statement This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif. CAN ICES-3(B)/NMB-3(B) The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 millimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 millimètres entre le radiateur et votre corps. Technical Data Operating Frequency: 125kHz Operating Temperature: 0° C to 40° C Max Power: 125kHz: <42dBuA/m at 10m Mobile Technologies Inc. - 1050 NE 67th Ave, Hillsboro, OR 97124 www.mtigs.com | T:800.426.6844 MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved 9


Document Created: 2019-08-01 21:54:46
Document Modified: 2019-08-01 21:54:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC