User manual

FCC ID: 2AA2U-BS616

Users Manual

Download: PDF
FCCID_3121393

正面 1 Warnings & Cautions 2 Getting Started Inside the box Inside the bag WARNING! • Do not use if you have a pacemaker or any other internal medical device. Power In • If you are pregnant, please activate “Pregnancy Mode” or “Weight LED Only Mode” from the HiMirror before using the Smart Body Scale. • Not intended for use by children under the age of 10. • Smart Body Scale should not be used to diagnose or treat any Foot Pads medical condition. Always consult your physician to determine what Conductive Mat is ideal for you. Smart Body Scale Caution • Do not use the Smart Body Scale on a wet floor or with wet feet; you risk slipping and falling. • Do not jump on the Smart Body Scale; you risk slipping and falling. • Do not put Conductive Mat on the Smart Body Scale while charging. • Do not charge the Smart Body Scale in the humid environment. User Manual • Always use the Smart Body Scale on a hard flat surface. Adapter User manual Warranty card Mat Pad HDBS6160X05 3 Getting Started 4 Getting Started 5 Using Your Smart Body Scale Before starting, you need: Charge your Smart Body Scale Assembling your Smart Body Scale Start your Smart Body Scale to measure Plug in the adapter, and charge your Smart 1.Put the Smart Body Scale near your 2. Put Conductive Mat on the Smart 1. Choose the Body & Fitness mode on your HiMirror. Body Scale for 6.5 hours before use. HiMirror. Then depress the button on Body Scale. 2. Stand barefoot in the middle of Conductive Mat and follow the instructions on your HiMirror. the back of your Smart Body Scale 3. The light will turn on while starting to measure. The light will turn off when the measurement for three seconds to pair with your is completed. 6.5 HiMirror. hours 3. Get started. Smart Phone HiMirror *You MUST charge your Smart Body Scale to power up or it can not be used. Place your feet on the marked section of the mat. Each charge should last around 180 days for a family of four. As with any scale; in order to ensure safety, as well as to ensure measurement accuracy, Please store the adapter carefully. you should always make sure that your feet and the scale surface are completely dry. Note: Conductive Mat should be flat after putting Conductive Mat on the Smart Body Scale. 6 Using Your Smart Body Scale 7 Care & Maintenance 8 Smart Body Scale Specification Power Status • Don’t submerge the scale or use high-pressure water jets (e.g. shower head) to clean the Intended Service Life Measurement When the battery is at or below 15% the Smart Bydy Scale light will blink 3 times. There will also surface. 3 years 10~150kg ( 22~330lbs ) be a warning on your HiMirror. • Don’t use antiseptic wipes, chlorine, or highly concentrated glass cleaner on the surface of the Measurement System Weight Accuracy Battery level at or near zero — no light. There will also be a warning on your HiMirror. scale. Multi-layered Tactile Electrode System 5~50kg ( 11~110lbs ): ±0.4kg ( 0.66lbs ) Battery charging and charged — the Smart Bydy Scale light will blink continually during charging. • Don’t wash the device with water or immerse it in water. 50~100kg ( 110~220lbs ): ±0.5kg ( 0.88lbs ) When the charge is completed, the Smart Body Scale will display a constant light. • Don’t use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or Electrode Method 100~150kg ( 220~330lbs ): ±0.6kg ( 1.1 lbs ) malfunction. 4-points tactile electrode system Note: Please refer to the video when you turn on the HiMirror product for the first time. It will show • Don’t disassemble this device. If you have any problems, please contact email us at Measurement Method Size and Weight you the Smart Body Scale power status and is also available on the HiMirror website www.himirror.com/support Harris Benedict Equation (HBE) • Smart Body Scale (www.himirror.com/video). • Do use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use adry soft Wireless Length 34cm 13.4in cloth to dry up the device. Bluetooth BLE4.0 32cm 12.6in Reset Smart Body Scale Width Plug in the adaptor to reset your Smart Body Scale. During the reseting progress, the Smart • Wipe down the surface with a damp cloth using water only. Adapter Depth 1.8cm 0.7in Body Scale will blink twice three times. • The cover may be washed. Please follow the instructions on the label. 100~240V / 50~60Hz / 1.2A DC Jack Weight 2kg 4.4lbs i.For model EM1005AHUS-050: AC input: 100-240V AC, 0.6-0.3A, 50-60Hz Degree of protection Type BF applied part Environmental Conditions DC output: 5V DC, 1.2A Software Version A0 Temperature Relative Humidity Atmospheric pressure ii.For model WAG010: Protection Against AC input: 100-240V AC, 0.2A, 50/60Hz IP21 Operating Environment +41~95ºF(+5~+35ºC) 30~85%RH 88kPa~106kPa Ingress of Water DC output: 5V DC, 1.2A Storage Environment -4~140ºF(-20~+60ºC) 10~95%RH 50kPa~106kPa Protected against access to hazardous parts with a Battery Capacity finger and against vertically falling water drops. 3000 mAh 背面 9 Batteries & Power 10 Batteries & Power 11 Troubleshooting • 6.5 hours for regular charge. • Battery Disposal Error Prompt • The typical charge time or number refer to No.3 “Charge your Smart Body Scale” Recycle or dispose of the lithium battery in accordance with all federal, state and local laws. To Error Message • The plug (or appliance separable) is used as disconnect to the mains supply, do not to position avoid fire and explosion hazard, do not burn or incinerate the battery. the ME EQUIPMENT so that it is difficult to operate the disconnection device. • Recycling the batteries Err1 1. The soles of your feet are not in firm contact with the electrodes. Please make sure • The device contains no user repairable or serviceable parts. When the battery no longer holds a charge, it should be replaced. The batteries are recyclable. your feet are bare. • The user must check that the equipment functions safely and see that it is in proper working Remove the old battery from the body scale and follow your local recycling guidelines. 2. Your posture is wrong or the soles of your feet are not in firm contact with the condition before being used. electrodes. • The manufacturer does not require preventive inspections by other persons. 3. The soles of your feet may be too dry. Please try moistening your soles with a wet • No modification of this equipment is allowed. towel, and then repeat the measurement. • The device is not suitable for use in the presence of flammable anesthetic mixtures with air or Err2 Please unplug and then re-plug in the adapter to reset the Smart Body Scale. with oxygen or nitrous oxide. • The operator shall not touch DC connector of adapter and the patient simultaneously. Err3 We apologize. The Smart Scale is not capable of measuring body weights of 330lbs • Manufacturer will provide circuit diagrams, component part lists, descriptions, calibration (150kg) and over. This unit is not suitable for your needs. instructions to assist to SERVICE PERSONNEL in parts repair. • When the body scale is in use, there should not be any great power appliances such as high Err4 Weak Signal. Please move the carpet closer to the mirror. voltage cables, X-ray machine, ultrasound equipment and electrizer nearby. • Do not use other adapter except the one provided with product. • Long power cable and air hose. To avoid strangulation and entanglement, keep cable out of reach of young children. 12 Measurement Indicators 13 Regulatory & Safety Notices 14 Regulatory & Safety Notices • Weight: The weight of a person’s body. Declaration of Conformity with Regard to the EU Directive 1999/5/EC The warning signs and symbols are essential to ensure your correct and safe use of this product and XYZ Inc. is authorized to apply the CE Mark on Smart Body Scale, Model BS616, thereby declaring protect you and others from injury. Please kindly find the meanings of the warning signs and symbols, conformity to the essential requirements and other relevant provisions of Directive 1999/5/EC. which you may encounter in the label and user manual, as follows: • Body Fat Percentage: Body Fat Percentage refers to the total amount of fat contained in a body. This device complies with FCC part 15 FCC Rules. Operation is subject to the following two conditions: Model : BS616 • Skeletal Muscle Mass: Skeletal Muscle Mass refers to the total weight of muscles that supports a 1. This device may not cause harmful interference. body’s movement and heartbeat. 2. This device must accept any interference, including interference that may cause undesired operation Symbol for “THE OPERATION GUIDE Symbol for “MANUFACTURER” • Total Body Water: Total Body Water (TBW) refers to the amount of water contained in a body. of the device. MUST BE READ” The Bluetooth Combination Mark Symbol for “DIRECT CURRENT” • BMR: Basal Metabolic Rate (BMR) refers to the minimum level of energy required to support a REACH IP21 FCC ID : 2AA2U-BS616 body’s basic function while at rest. Symbol for “TYPE BF APPLIED PARTS” Symbol for “ENVIRONMENT PROTECTION – Waste electrical • Bone Mass: Bone Mass refers to the weight of minerals contained in a body. products should not be disposed of Symbol for “SERIAL NUMBER” with household waste. Please • BMI: Body Mass Index (BMI) is calculated as (weight / height²). Since the BMI cannot determine recycle where facilities exist. Check the amount of body fat contained in a body, the Fat Free Mass Index (FFMI) is usually used to Symbol for “MANUFACTURE DATE” with your local authority or retailer determine the fat-free mass. The Fat Free Mass Index (FFMI) refers to the amount of non-body fat for recycling advice” weight in a body by taking your muscle mass into account and is calculated as [weight (kg)* (100% – body fat rate)] / height² (m). Note: You will see the most consistent and reliable readings when placing your Smart Body Scale scale on a hard, flat surface. 15 Regulatory & Safety Notices 16 Smart Body Scale Information 17 Smart Body Scale Information FCC User Guide Information What is Smart Body Scale ? Limitations Radio Frequency Interface Requirements - FCC Smart Body Scale is an innovative new Internet-of-things connected device with up to date health-management • The Smart Body Scale will not accurately measure the weight of children and adults under 10kg (22 lbs). Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant technology. It offers highly accurate body composition analysis, such as physique rating(9 body–types), weight, body fat percentage, body mass index, total body water, skeletal muscle mass, bone mass & basal metabolic Any Questions ? to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful rate. Smart Body Scale can be work with HiMirror or individual APP. More advice regarding the installation and use of the Smart Body Scale is available online at: interference in a residential installation. This equipment generates, uses and can radiate radio frequency http://himirror.com/support/ energy and, if not installed and used in accordance with the instructions, may cause harmful interference to Innovations radio communications. However there is no guarantee that interference will not occur in a particular installation. • Auto Weight Measurement: If this equipment does cause harmful interference to radio or television reception, which can be determined by While users stand on a comfortable mat, the Smart Body Scale measures the user’s body indicators; turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the automatically connects with the Hi Mirror or your smart phone, and updates the data accordingly. following measures: • Not Just Weight : Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; We have developed a full body type analysis. It doesn‘t just rely on the numbers, but also focuses on different Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; body types to assess the user’s body issues precisely. Consult the dealer or an experienced radio / TV technician for help. Radio Transmitters (Part 15) • High tech analysis: The Smart Body Scale provides precise analysis with a multi-layered structure all while standing on a This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Conductive Mat. this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s Service Address: 20191 Windrow Dr., Lake Forest CA 92630 ,USA authority to operate the equipment. FCC RF Exposure Guidelines Safety Information Reducing RF Exposure - Toll-free number: +1-855-999-3348 Use Properly Only operate the device in accordance with the instructions supplied. This device complies with Website: www.himirror.com FCC radiation exposure limits set forth for an uncontrolled environment. Support Site: www.himirror.com/support Imported by XYZprinting, Inc. FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the Zhongshan Transtek Electronics Co.,Ltd Jin´an Road, Minzhong, Zhongshan user’s authority to operate the equipment. 528441 China


Document Created: 2016-07-29 11:43:16
Document Modified: 2016-07-29 11:43:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC