Narrative Update

0398-EX-PL-2016 Images

Tyvak Nano-Satellite Systems, Inc.

2016-08-10ELS_180558

Before the FEDERAL COMMUNICATIONS COMMISSION Washington, DC 20554 In the Matter of ) ) Tyvak Nano-Satellite Systems LLC ) ) Application for Authority for Ground ) Testing, Launch, and Operation of an ) File No. ____-EX-PL-2016 Experimental Non-Geostationary ) Low Earth Orbit Satellite ) NARRATIVE EXHIBIT

Table of Contents I. NARRATIVE INFORMATION REQUIRED BY FCC FORM 442 ................. 1 Question 6A. Description of the nature of the research project being conducted ............................................................... 1 Question 6B. Showing that the communications facilities requested are necessary for the research project .............. 2 Question 6C. Showing that existing communications facilities are inadequate ........................................................................ 4 Question 10. Transmitting equipment to be installed, including manufacturer, model number and whether the equipment is experimental in nature ................................ 4 Question 11A. Is the equipment listed in Item 10 capable of station identification pursuant to Section 5.115 .......................... 5 Question 4. Antenna Registration Form. Operation of Directional Antenna ......................................................... 5 II. RELEVANT INFORMATION ADDRESSED IN SECTION 25.114 OF THE COMMISSION’S RULES .......................................................................... 6 A. Radio Frequency Plan ......................................................................... 6 B. Orbital Locations............................................................................... 11 C. Physical Characteristics of Satellite .................................................. 11 D. Schedule…………… ........................................................................ 13 E. General Description of Overall System Facilities, Operations and Services ................................................................... 13 F. Predicted Spacecraft Antenna Gain Contours ................................... 14 G. Orbital Debris Mitigation.................................................................. 15 1. Limiting the amount of debris released and the probability of the satellite becoming a source of debris by collisions with small debris ............................................................ 15 2. Limiting the probability of accidental explosions during and after completion of the mission operations .................... 16 3. Limiting the probability of the satellite becoming a source of debris by collisions with large debris or other operational space stations .............................................. 16 4. Post-mission disposal plans for the space station at end of life ......... 17 III. CONCLUSION.................................................................................................. 18

Before the FEDERAL COMMUNICATIONS COMMISSION Washington, DC 20554 In the Matter of ) ) Tyvak Nano-Satellite Systems LLC ) ) File No. ____-EX-PL-2016 Application for Authority for Ground ) Testing, Launch, and Operation of an ) Experimental Non-Geostationary ) Low Earth Orbit Satellite ) NARRATIVE EXHIBIT Tyvak Nano-Satellite Systems LLC (“Tyvak”) uses nano-satellite and CubeSat space vehicle to conduct tests of satellite components and for other scientific missions. With this Application, Tyvak requests two-year authority for ground testing, launch, and operation of a single experimental non-geostationary (“NGSO”) low earth orbit (“LEO”) CubeSat satellite. Telemetry monitoring, tracking, and command (“TT&C”) transmissions and payload data downlink will be carried out in the 400 MHz UHF range.1 I. NARRATIVE INFORMATION REQUIRED BY FCC FORM 442 Question 6A. Description of the Nature of the Research Project Being Conducted Tyvak is internally funding a small nanosatellite attitude control experiment. This mission validates technologies needed to support precise near- and far-field optical imaging, precise 1 Tyvak will also file an application for experimental authority to operate an associated UHF Earth station. Authority for additional associated UHF Earth stations may be sought by Tyvak affiliates in separate applications, as explained below.

propulsive maneuvering and bulk data transfer while leveraging the inherent relative low costs of their vehicle manufacture and launch capabilities. The proposed satellite will adhere to a design specification co-developed by Stanford University (“Stanford”) and California State University, San Luis Obispo (“Cal Poly”) referred to as the CubeSat Standard. Additional information regarding the CubeSat Standard can be found at the CubeSat Community website, http://www.CubeSat.org/. The spacecraft will be fabricated, tested, launched, and operated by Tyvak using its Mission Operations Center (“MOC”) in Irvine, California, and using affiliated Earth Stations in other locations, the authorizations for which will be secured under a separate application. 2 TT&C and payload data downlink for the satellite will be carried out by Tyvak via a two-way link in the UHF band between 399.9-400.05 MHz. Prior to launch, Tyvak will conduct developmental testing of satellite components, including its transmitters and receivers, at its Irvine, California facilities. Post launch, the satellite on-orbit operations are expected to take 9 to 12 months, which will permit adequate time to demonstrate the optics, maneuvering, and attitude control systems under investigation. Question 6B. Showing that the Communications Facilities Requested are Necessary for the Research Project The primary purpose of this mission is to perform a technology demonstration of the optical system, propulsion system, and attitude control platform. On-orbit operation is the only effective way of collecting functional and performance data in the relevant operational environment, and cannot be adequately substituted by ground testing or computer simulation. 2 References to Earth stations in this application are included to provide a comprehensive system overview, but are solely advisory. 2

With the proliferation of the CubeSat Standard and the availability of low-cost space access for those adhering to that standard, the cost to test miniature components on-orbit has become relatively inexpensive compared to equivalent ground testing and simulation. This is largely due to the availability of low-cost secondary payload launch options and cost sharing among multiple CubeSat developers. In addition, on-orbit data provides confidence that future systems will operate successfully on-orbit through maneuvers. The evaluation of hardware and software in an environment similar to that found in space is not easily replicated on Earth. On-orbit component failures are often attributed to unforeseen conditions or coupling of effects that cannot be tested adequately until on- orbit. Consequently, the use of an on-orbit test bed provides significant direct and indirect financial benefits, as well as risk reduction for future satellite programs. Question 6C. Showing that Existing Communications Facilities are Inadequate Currently, there are no comparable communications facilities to support the operation of the CubeSat system for any of the three required operations. For the TT&C and payload downlink in the 399.9-400.05 MHz UHF band, as discussed in a later section of this Application, Tyvak is unaware of any currently authorized use of the UHF band between 399.9-400.05 MHz in the United States or other countries. Thus, there are no suitable existing facilities. Question 10. Transmitting Equipment to be Installed, Including Manufacturer, Model Number and Whether the Equipment is Experimental in Nature The satellite has one transmitting element for which authority is being sought from the Commission: a TT&C and payload data transceiver that operates in the UHF band between 399.9- 400.05 MHz. The following graphic provides an overview of the transmitting and receiving 3

components. The specific model numbers are subject to change based on product availability and system upgrades. On-board Processor CubeSat UHF Radio Type: UHF Radio Manufacturer: Tyvak Model: Endeavour UHF Custom Type: UHF Dipole antenna Manufacturer: Model: Custom Custom / Experimental Type: Yagi antenna array (4) Manufacturer: M2 Systems Model: 400CP30 Commercially Available Type: Power Amp Manufacturer: TE Systems Model: 4452RAS Power Amp Commercially Available UHF Radio Mission Operations Type: UHF Radio Manufacturer: ICOM Center Model: IC-9100 Commercially Available Mission Operations Figure 1: CubeSat System Communications Components The transmitting components aboard the CubeSat are controlled by a dedicated on-board processor, which processes data for transmission, sends and receives data from the modem, and 4

activates the appropriate radio systems depending on the state of operations. The satellite possesses a UHF system for vehicle command and telemetry retrieval and payload data download. The TT&C UHF system uses a Tyvak-developed UHF radio derived from commercially- available UHF communications systems. The radio operates at 9,600 baud to 19,200 baud using GMSK. The UHF system will use a custom designed half-wave dipole antenna. The TT&C ground segment will address the satellite through the use of specific message destination address, authentication counts and/or encryption keys using the same frequency allocation. The transmitting component located at the Irvine Earth station is controlled by dedicated Microsoft Windows workstations. The workstations are used for antenna pointing control, Doppler frequency shift corrections, and data processing for transmission. The antenna (manufacturer/model: M2 Antenna Systems, Inc./400CP30) and radio (manufacturer/model: ICOM/IC-9100) are commercially available, off-the-shelf units, which will be modified with additional hardware to function at the requested frequencies. Question 11A. Is the Equipment Listed in Item 10 Capable of Station Identification Pursuant to Section 5.115 Each transmitting component of the system is capable of station identification, and the satellite will transmit its call sign in every packet transmitted as part of its frame header. The frame header is not encoded or encrypted. Question 4: Antenna Registration Form; Operation of Directional Antenna The satellite will be a low earth orbit (“LEO”) satellite in a sun-synchronous orbital with an orbit period of approximately 1.6 hours. The satellite will pass over the Earth station roughly one to twelve times per day depending on its location with an average access time of five to seven 5

minutes for each Earth station location. The UHF Earth station will use a computer-controlled tracking antenna to point the Earth station’s antenna in the direction of the moving satellite. The antenna has a maximum gain of +16.2dBi along the bore-sight of the antenna and a half-power beam-width (i.e., -3dB) of approximately 30 degrees. The antenna array uses four off-the-shelf, yagi-type antenna developed by M2 Antenna Systems, Inc. The spacecraft is an NGSO satellite, thus the range of antenna azimuth and elevation will vary based on the relative motion of the satellite with respect to the ground station. It will also differ for each satellite pass. The Earth station will only transmit above a 5 degree elevation angle. Consequently, the range of antenna elevation angles for all satellite passes will be between 5 and 175 degrees. The azimuth can vary between 0 degrees and 360 degrees. Earth station software will be used to control the antenna azimuth and elevation rotors for antenna pointing and limit the range of permissible elevation angles. In addition, the software will be used to predict satellite contact times and antenna pointing angles to support Earth station planning and operations. In addition to on-orbit operations, the satellite components will undergo occasional ground test up until launch. Testing for the UHF TT&C link will be conducted in carrier current (i.e., closed-loop) configuration and will not produce any measurable emissions. II. RELEVANT INFORMATION ADDRESSED IN SECTION 25.114 OF THE COMMISSION’S RULES A. Radio Frequency Plan UHF Communications System The satellite’s UHF communications system will operate using half-duplex communications within the 399.9-400.05 MHz frequency band for telecommand (i.e., earth-to- space) and telemetry (i.e., space-to-earth). Although the satellite requires only 16.5 kHz of 6

spectrum bandwidth, Tyvak requests herein authority to operate within the entire 399.9-400.05 MHz frequency band for the mission to facilitate design flexibility. The following diagram shows the proposed spectrum use of the CubeSats and ground stations and also shows authorized spectrum uses in adjacent bands, such as the use by the Orbcomm Little LEO MSS network of the 400.075-400.125 MHz band as a beacon frequency. As explained below, the 399.9-400.05 MHz frequency band does not appear to be used by any authorized government or non-government operator in the United States. Tyvak acknowledges that the Commission has proposed to authorize operation of a federal Mobile Satellite System in the 399.99-400.05 MHz portion of this fallow band, however, any Tyvak transmissions related to this mission will be completed well before any Federal operations in the band commence. 3 Therefore, Tyvak’s proposed operation of its experimental satellite in 50 kHz of the 399.9-400.05 MHz frequency band will not cause harmful interference to any authorized spectrum user. 400.01 400.05 400.075 400.125 399.9 Tyvak Cubesats PRIMARY Orbcomm RADIONAVIGATION SATELLITE PRIMARY PRIMARY Non-Voice, Non-Geostationary (NVNG) STANDARD FREQUENCY AND TIME SIGNAL SATELLITE Mobile Satellite Service (MSS) 399.075 400 400.025 400.05 400.075 400.1 400.125 400.15 MHz Figure 2: CubeSat Spectrum Diagram (UHF) 3 See Federal Space Station Use of the 399.0-400.05 MHz Band, ET Docket No. 13-115, Notice of Proposed Rulemaking, FCC 13-65, ¶ 63 (2013). 7

The 399.9-400.05 MHz frequency band is allocated internationally on a primary basis to the Mobile Satellite Service (“MSS”) (earth-to-space). The 399.9-400.05 MHz frequency band is also allocated internationally on a primary basis to the Radionavigation Satellite Service (“RNSS”) until January 1, 2015.4 In the United States, the 399.9-400.05 MHz frequency band is allocated to the MSS and RNSS services for both government and non-government use. During the 1995 World Radiocommunication Conference (“WRC-95”), the International Telecommunication Union (“ITU”) allocated the 399.9-400.05 MHz band for the Little LEO MSS service. The Commission subsequently designated the 399.9-400.05 MHz band as available for use by Little LEO MSS networks.5 None of the applicants for Little LEO MSS licenses in the United States, however, requested authority to operate in the 399.9-400.05 MHz band.6 Therefore, the Commission refrained from adopting service rules for Little LEO MSS networks operating in the 399.9-400.05 MHz band and did not issue any licenses to Little LEO MSS networks authorizing them to operate in the band. 7 Tyvak is unaware of any Little LEO MSS network 4 See 47 C.F.R. § 2.106 n.5.224B. 5 See Amendment of Section 2.106 of the Commission’s Rules to Allocate Spectrum to the Fixed- Satellite Service and the Mobile-Satellite Service for Low-Earth Orbit Satellites, Report and Order, 8 FCC Rcd 1812 (1993); 47 C.F.R. §§ 2.106 n.US320 & 25.202(a)(3). Although the Commission originally included the 399.9-400.05 MHz band in footnote US320, reference to the 399.9-400.05 MHz band was inadvertently deleted from US320 during a Commission effort to consolidate footnotes. The Commission corrected the error, reincorporating the reference to the 399.9-400.05 MHz band in footnote US320. See Amendment of Parts 2, 25, and 73 of the Commission’s Rules to Implement Decisions from the World Radiocommunication Conference (Geneva, 2003) (WRC- 03) Concerning Frequency Bands Between 5900 kHz and 27.5 GHz and to Otherwise Update the Rules in this Frequency Range, Report and Order, 20 FCC Rcd 6570, 6625 (2005). 6 See Amendment of Part 25 of the Commission’s Rules to Establish Rules and Policies Pertaining to the Second Processing Round of the Non-Voice, Non-Geostationary Mobile Satellite Service, Report and Order, 13 FCC Rcd 9111, 9120-21 (1997). 7 See id. at 9121. 8

operating anywhere in the world (and particularly not in the United States) that uses the 399.9- 400.05 MHz band. The 399.9-400.05 MHz frequency band is also allocated internationally on a primary basis to RNSS until January 1, 2015. The 399.9-400.05 MHz frequency band was previously used by the U.S. Department of Defense for its TRANSIT-SAT RNSS system, which was a polar orbiting satellite network that was primarily used for commercial and government maritime navigation. The TRANSIT-SAT network, however, was decommissioned in December 1996.8 It does not appear that the United States government or commercial operators are using the 399.9-400.05 MHz frequency band for any other RNSS service. As a consequence, the 399.9- 400.05 MHz frequency band appears to be fallow of any authorized use in the United States. Therefore, the short term operation of Tyvak’s experimental CubeSats will not result in harmful interference to any authorized spectrum user. Space-to-Earth and Earth-to-Space UHF Communications Despite the absence of any authorized spectrum users in the 399.9-400.05 MHz band, the satellite has been designed to include several precautions to prevent harmful interference to other services from space-to-Earth transmissions. First, as noted above, space-to-Earth satellite transmissions will be controlled from the Earth station and the spacecraft will not transmit until it receives a request from the Earth station or has on-board GPS confirmation that it is above the designated ground station. Second, the satellite uplink and downlink will use the same 50 kHz bandwidth in half- duplex mode to send digital data using standard GMSK modulation with maximum data rates up 8 See Federal Long-Range Spectrum Plan, Working Group 7 of the NTIA Spectrum Planning Subcommittee (Sept. 2000), available at http://www.ntia.doc.gov/osmhome/LRSP/LRSP5a.htm. 9

to 9,600 baud. The spacecraft transceiver uses a packet-based (non-continuous) communications, which allows command reception between transmissions of packets to provide the ability to command the satellite to cease space-to-Earth transmission operations in a timely manner, if required. The satellite transmitter can be adjusted to provide up to two watts of power output when communicating with the Earth station. Transmission power on the Earth station transmitter can be adjusted to provide up to 200 watts of power output. The communications parameters for the UHF communications system for the space-to-Earth and Earth-to-space links are show in the following tables. CubeSat Communications Value Parameters Emission Designator 16K5G1D Service Digital Data Center Frequency 399.96 MHz Requested Bandwidth 50 kHz (includes Doppler) Modulation GMSK Data Rate 9,600 bps Polarization Indirect Circular Antenna Type Dipole Antenna Gain +2 dBi (Max) RF Power Output 2W Line/Misc Losses -2dB EIRP 1.0 dBW Table 1: Tyvak CubeSat UHF Communications Space-to-Ground Parameters Earth Station Value Communications Parameters Emission Designator 16.5KG1D Service Digital Data Center Frequency 399.96 MHz Requested Bandwidth 50 kHz (includes Doppler) Modulation GMSK Data Rate 9,600 bps 10

Earth Station Value Communications Parameters Polarization Linear (H, V) or Circular Antenna Type Yagi array Antenna Gain +16.2 dBi (Max) RF Power Output 180 W Line Losses -1dB EIRP 7161.4 W Table 2: Tyvak Earth Station UHF Communications Parameters B. Orbital Locations The CubeSat system comprises a single space vehicle operating in NGSO. The spacecraft is intended to operate in LEO with the orbit parameters shown in Table 6. The satellite will have an orbit period of roughly 1.6 hours with typical ground access times of five to seven minutes per pass. The orbit parameters are presented in the following table: Parameter Units Value Orbit Period [hrs] 1.6 hrs Orbit Altitude [km] 610 km (circular) Inclination [deg] 97.-6 – 97.9 degrees Table 4: CubeSat Orbit Parameters C. Physical Characteristics of the Satellite The space vehicle is a Nano-class satellite (< 10 kg), in which each element conforms to the CubeSat Standard. CubeSats can be designed in different sizes as long as they are multiples of the basic CubeSat standard unit, which is 10×10×10 centimeters, generally referred to as a 1U CubeSat, meaning one unit in size. The satellite will consist of a single 3U CubeSats, resulting in dimensions of approximately 30×10×10 centimeters. The CubeSat dispenser limits the total vehicle mass of a 3U CubeSat to less than 6 kilograms. The mass budget is provided in the following table: 11

Component / Subsystem Mass [g] Payload 1400 Spacecraft (Subtotal) 4300 Structure 300 Electrical Power System 1500 Propulsion System 1400 ADCS 400 C&DH 100 Communication 500 Thermal 100 TOTAL 5700 Table 5: CubeSat Mass Budget per Element For propulsion, the satellite is equipped with eight miniature cold gas thrusters. Each thruster is fed from a common gas storage vessel with propellant capacity of 400 grams and an initial pressurization of 83 psi (at 20degC). The thrusters are not mechanical and propulsion uses common refrigerant (R236fa) involving no combustion. The thrusters are highly integrated with the sensors to provide for precision maneuvering. For power generation, the satellite is equipped with body-mounted and deployed GaAs solar cells that generate approximately 16 watts of power during a typical orbit. Because of the short operational lifetime of the satellite (i.e., less than a year), the difference between the beginning-of-life (“BOL”) and end-of-life (“EOL”) power generation is negligible. To permit operations during eclipse, energy is stored on-board using Li-ion batteries, with power being distributed to subsystems and components through the electrical power subsystem circuitry. The EOL power budget is provided in the following table: Component / Subsystem EOL Power [mW] Orbit Averaged Payload 3500 Spacecraft (Subtotal) 10000 Propulsion System 140 ADCS 5000 C&DH 600 12

Communication 3500 Thermal 400 TOTAL 13500 Table 6: Power Budget per Space Vehicle D. Schedule The project timeline and major milestones for the launch and operation of the CubeSat system are provided in the following table. The dates are approximate and contingent upon the exact launch date (“Time of Launch” or “ToL”), orbit parameters, and unforeseen events during on-orbit operations. Milestone Date Notes Fabrication and RF closed loop March 2014- ToL - 28 months testing July 2015 Delivery for Launch Integration July 2016 ToL - 3 months Pre-launch testing of transmitting Aug 2016 ToL - 2 months components Launch Oct 2016 ToL + 0 Release from launch adapter Oct 2016 ToL + 0hr 30min On-orbit check Oct 2016 ToL + 24 hours Start of experiments Oct 2016 ToL + 4 weeks Decommissioning July 2017 ToL + 9 months Re-entry Oct 2031 ToL + 13 year Table 7: CubeSat System Major Milestones E. General Description of Overall System Facilities, Operations and Services The satellite provides a platform for on-orbit testing of advanced maneuvering and optical imaging technologies. The onboard systems on each space vehicle provide nominal attitude, electrical power, data storage, and command function for a set of mission payloads. The space vehicle communicates with the Earth stations through a low-rate (9.6 kbps) half-duplex communications link operating in the UHF band. 13

The satellite will be supported by a UHF Earth station at the Irvine MOC and several additional Earth stations operated by Tyvak affiliates at sites in North Pole, Alaska; Bozeman, Montana; and Columbia, Maryland. Tyvak affiliates will seek authorization for each of the UHF Earth stations in separate applications. The primary responsibilities of the Irvine MOC will be to command the space vehicle to initiate the experiments, recover spacecraft engineering telemetry, and manage the function of the spacecraft. The Earth station equipment comprises a UHF yagi antenna array and UHF transceiver. The MOC will also have vehicle control workstations and a mission data archive server. 9 The workstations will serve as the primary interface with the ground controllers and will be used for data processing, antenna/radio control, and engineering analysis. The mission data archive server will archive command and telemetry data to support mission operations, status, troubleshooting, and post-mission assessment. F. Predicted Spacecraft Antenna Gain Contours The spacecraft UHF antenna is a half wavelength L-dipole antenna, which is essentially omni-directional when mounted on the corner of a CubeSat structure. A simulation of the antenna design is shown in Figure 3. 9 TT&C data and payload data will be received directly from the spacecraft via UHF link. 14

Figure 3: CubeSat L-Dipole UHF Antenna Gain Plot G. Orbital Debris Mitigation Because the CubeSat mission includes electro-optical imaging capabilities, Tyvak will apply to the National Oceanic and Atmospheric Administration (“NOAA”) for a license to operate a private remote sensing space system. Pursuant to Section 960.11 of NOAA’s rules, NOAA is responsible for evaluating the orbital debris mitigation plans of applicants for NOAA licenses.10 Thus, the following discussion and the orbital debris assessment report (“ODAR”) included as an attachment to this application are for informational purposes only. 1. Limiting the amount of debris released and the probability of the satellite becoming a source of debris by collisions with small debris In order to limit the amount of debris generated during normal operations, the satellite has been designed so that all parts will remain attached to the satellite during launch, ejection, and 10 15 C.F.R § 960.11 (b)(12). 15

normal operations. This requirement is intrinsic to all satellites conforming to the CubeSat Standard and compliance is required for launch using the Poly-Picosatellite Orbital Deployer (“P- POD”) system. The basic geometry the two satellite is a monolithic cubic structure (i.e., 30cm x 10cm x 10cm) with two pairs of 30cm x 10cm deployable panels. Based on an orbital debris model (ref. NASA DAS v2), the probability of a single particle impact with a size of 1 millimeter or larger over the mission lifetime is very low (i.e., roughly 1.3 x 10-3). This low probability of impact for the mission is a result of the small effective area of the space vehicle (i.e., effective area ~ 0.15 m2) and the relatively short mission duration (i.e., operational mission life less than one year). Catastrophic system failure due to orbital debris or micrometeoroid impact will not affect the vehicle’s ability to de-orbit within the guidelines for vehicles operating in LEO (i.e., less than 25 years). Based on the mission orbit of 600 km, the space vehicle is anticipated to re-enter the atmosphere within 13 year based on lifetime prediction simulations for the current mission epoch (i.e., launch in CY2016). 2. Limiting the probability of accidental explosions during and after completion of the mission operations Experimentation with technologies for maneuvering and optical imaging are primary mission objectives for the satellite. Thus, the satellite is equipped with small cold-gas propulsion systems employing low specific impulse, low-pressure gas. The pressure vessel is made from aluminum, has a volume of 400 ml and an initial pressurization of 83 psi (at 20degC). The vessel has been designed to an ultimate safety factor of 2.5 times the operating pressure at maximum storage temperature. These vessels will be fully depressurized as a part of the deorbit maneuver process. 16

In addition, the vehicles possess energy storage devices (i.e., Li-ion batteries), which will be left in a nearly discharged state as part of the decommissioning procedure. 3. Limiting the probability of the satellite becoming a source of debris by collisions with large debris or other operational space stations Based on a simple orbital debris model (ref. NASA DAS v2), the probability of the CubeSat colliding with large debris or other space systems of sizes one centimeter or greater at the mission orbit altitude and inclination is negligible (i.e., roughly 4x10-6). The launch provider has instituted deployment procedures in order to place the co- manifested satellites in the launch vehicle into slightly different orbits in order to reduce the risk of collision. One of these procedures is to stagger deployment times. 4. Post-mission disposal plans for the space station at end of life The post-mission disposal plan for the CubeSat includes the transition of all vehicle systems to a dormant state, which includes the cessation of all radio operations (i.e., transmit and receive). Energy storage devices will be held at a minimal charge state at the end of the life of the vehicles. All propellant remaining at end of life will be expended to initiate deorbit, resulting in anticipated atmospheric re-entry of the satellite within 13 years of mission completion based on its mission orbit, vehicle mass, geometry and mission epoch (i.e., launch in CY2016). Although no active de-orbit maneuvers are required to meet the 25 year re-entry guidelines, Tyvak anticipates accelerating de-orbit using the measures described above. Re-entry debris and probability of human casualty will be negligible. The materials used on the vehicle include aluminum and PCB material, which have a relatively low melting temperature as compared to other materials such as titanium or stainless steel, and are not expected to survive reentry. III. CONCLUSION 17

The Experimental Licensing Branch should grant Tyvak’s application for two-year experimental authority to launch and operate a single NGSO LEO satellite, which will permit Tyvak to demonstrate and evaluate advanced maneuvering and optical imaging technologies.. Tyvak’s experiment will not cause harmful interference to any licensed service. Tyvak will conduct its experiment using low-power transmissions in the vacant 399.9-400.05 MHz UHF band. Further, the Tyvak operation will meet the Commission’s orbital debris mitigation requirements. Therefore, Tyvak’s application should be granted at the soonest practicable time. 18


Document Created: 2016-08-10 15:48:02
Document Modified: 2016-08-10 15:48:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC