Directional Antenna Deployment Parameters

0866-EX-CN-2018 Text Documents

Midcontinent Communications

2018-11-05ELS_219264

Deployment Parameters

       The experimental trial proposes operation from the three sites, which are identified on the
application. Throughout the test Midcontinent Communications will use various 20 megahertz
channels with the signal oriented at specific azimuths. The chart below provides information
requested in the Directional Antenna section of the form.


                                    Location 1- Bismark, ND
               Coordinates                         46-48-18.0N / 100-48-04.0W
               Width of beam in degrees at the     65° ± 2
               half power point
               Orientation in horizontal plane     0°, 90°, 180° and 270°
               (degrees from True North)
               Orientation in vertical plane       6°
               (degrees from horizontal)

                                   Location 2 – Mitchell, SD
               Coordinates                        43-41-49N / 98-00-46W
               Width of beam in degrees at the    65° ± 2
               half power point
               Orientation in horizontal plane    0°, 90°, 180° and 270°°
               (degrees from True North)
               Orientation in vertical plane        6°
               (degrees from horizontal)

                                Location 3 – Breckinridge, MN
               Coordinates                        46-16-19.0 / 96-33-51.0W
               Width of beam in degrees at the    65 ° ± 2
               half power point
               Orientation in horizontal plane    0°, 90°, 180° and 270°
               (degrees from True North)
               Orientation in vertical plane      6°
               (degrees from horizontal)




                                                1



Document Created: 2018-11-02 17:51:23
Document Modified: 2018-11-02 17:51:23

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC