DD FORM 1494

0540-EX-ST-2014 Text Documents

L3 Unmanned Systems, Inc.

2014-06-19ELS_150434

CLASSIFICATION DATE Form Approved APPLICATION FOR EQUIPMENT OMB No. 0704-0188 FREQUENCY ALLOCATION Unclassified 10June2014 PAGE 1 OF PAGES The public reporting burden for this collection of information is estimated to average 24 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number, PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ORGANIZATION. RETURN COMPLETED FORM TO THE USING AGENCY OR CONTRACTING AGENCY, AS APPROPRIATE. DOD GENERAL INFORMATION TO FROM Office of the DOD area frequency coordinator Quantico, Virginia 1. APPLICATION TITLE Orbiter III Unmanned Aerial System 2. SYSTEM NOMENCLATURE "Line of Site" Data Link Telemetry System 3. STAGE OF ALLOCATION (X one) a. STAGE 1 - CONCEPTUAL b. STAGE 2 - EXPERIMENTAL c. STAGE 3 - DEVELOPMENTAL d. STAGE 4 - OPERATIONAL 4. FREQUENCY REQUIREMENTS a. FREQUENCY(IES) Control 425-441 Mhz, Video 2200-2300 Mhz b. EMISSION DESIGNATOR(S) 5. TARGET STARTING DATE FOR SUBSEQUENT STAGES a. STAGE 2 b. STAGE 3 c. STAGE 4 7July 2013 - 25July 2013 6. EXTENT OF USE Continuous during flight operations 7. GEOGRAPHICAL AREA FOR a. STAGE 2 b. STAGE 3 c. STAGE 4 Restricted area(s) R-6608A, R-6608B and R-6608C 8. NUMBER OF UNITS a. STAGE 2 b. STAGE 3 c. STAGE 4 3 Airvehcles and 2 Ground Control Unit 9. NUMBER OF UNITS OPERATING SIMULTANEOUSLY IN THE SAME ENVIRONMENT two 10. OTHER J/F 12 APPLICATION NUMBER(S) TO BE 11. IS THERE ANY OPERATIONAL REQUIREMENT AS DESCRIBED IN a. SUPERSEDED J/F 12/ THE INSTRUCTIONS FOR PARAGRAPH 11? b RELATED J/F 12/ a. YES b. NO c. NAvail 12. NAMES AND TELEPHONE NUMBERS a. PROGRAM MANAGER (1) COMMERCIAL (2) AUTOVON Dave Lleras 972-951-5200 b. PROJECT ENGINEER (1) COMMERCIAL (2) AUTOVON Brian Anderson 214-232-0361 13. REMARKS DOWNGRADING INSTRUCTIONS CLASSIFICATION Unclassified DD FORM 1494, AUG 96 PREVIOUS EDITION MAY BE USED. Reset Adobe Professional 7.0

INSTRUCTIONS FOR COMPLETING DD FORM 1494, "APPLICATION FOR EQUIPMENT FREQUENCY ALLOCATION" GENERAL INFORMATION ITEM 3 - Stage of Allocation. Mark the appropriate block using the following NTIA definitions. CLASSIFICATION: This form must be classified in accordance with appropriate agency security directions. Downgrading instructions Stage 1 - Conceptual. The initial planning effort has been must be indicated. The highest classification for each item or sub- completed, including proposed frequency bands and other available item as required must be indicated by a (U), (C), or (S) alongside the characteristics. item or sub-item title, for classified applications. Stage 2 - Experimental. The preliminary design has been completed, APPLICATION PURPOSE: This is an application for development or and radiation, using test equipment or preliminary models, may be procurement of equipment with RF emitters. It is not a frequency required. assignment request for operation of RF emitters. Funds must not be obligated prior to the approval of an application for frequency Stage 3 - Developmental. The major design has been completed, allocation. and radiation may be required during testing. DATA REQUIREMENT: All applicable data items shall be submitted Stage 4 - Operational. Development has been essentially completed, for all stages. Estimated values or ranges of values may be submit- and final operating constraints or restrictions required to assure ted for Stage 1 and 2 in the absence of calculated or measured compatibility need to be identified. values and shall be annotated (EST). Values for Stages 3 and 4 should be measured. ITEM 4 - Frequency Requirements. STANDARDS: Technical parameters of the application will be a. Enter the required frequency band(s). For equipment designed to evaluated against the appropriate DoD, National and International operate only at a single frequency, enter this frequency. Indicate EMC standards. units, e.g., kHz, MHz, or GHz. REMARKS ITEMS: Use the remarks item located at the bottom of b. Enter the emission designator(s) including the necessary band- each page of the form to amplify or clarify the entries. Add width for each designator, as described in Chapter 9 of the NTIA continuation pages as required. Manual e.g., 40M0PON. Identify each mode as hopping or non-hopping, e.g. 64M0F3E (Hopping). ABBREVIATIONS: Enter in Item 13, "Remarks," any other information pertinent to frequency requirements, such as minimum frequency separation or Hertz Hz microseconds usec special relationships involving multiple discrete frequencies. kilohertz kHz decibel dB megahertz MHz dB isotropic dBi ITEM 5 - Target Starting Date for Subsequent Stages. Enter gigahertz GHz pulses per second pps proposed date of application submission for each subsequent stage. milliwatt mW parts per million ppm watt W peak envelope power PEP ITEM 6 - Extent of Use. Describe extent of use that will apply to nanoseconds nsec not applicable NA Stage 4, e.g., continuous or intermittent. If intermittent, provide National NTIA not available NAvail information including the expected number of hours of operation per Telecommunications occupied bandwidth OC-BW day or other appropriate time period; scheduling capability; and any & Information conditions governing the times of intermittent use, e.g., used only Administration during terminal guidance phase, used only as required for calibration of test range equipment. HOW TO ASSEMBLE THE FORM: ITEM 7 - Geographical Area. Enter geographical location(s) or FOR US COORDINATION: area(s) of use for this and subsequent stage(s), e.g., Gilfillan Plant, Los Angeles, California, and White Sands Missile Range, New 1. DoD General Information Page Mexico (Stage 2); US&P (Stage 3); US&P, NATO Countries and 2. Transmitter Page(s) Korea (Stage 4). Provide geographical coordinates (degrees, 3. Receiver Page(s) minutes, seconds) if available. 4. Antenna Page(s) 5. Line Diagram(s) ITEM 8 - Number of Units. Enter total number of units planned for 6. Space Systems Data, if applicable the stage review requested and the subsequent stages. 7. Continuation Page(s) (cross reference pages) 8. NTIA General Information Page ITEM 9 - Number of Units Operating Simultaneously in the Same Environment. Enter maximum number of these units planned to be FOR FOREIGN COORDINATION: If this form is used to obtain operating simultaneously in the same environment during Stage 4 foreign national frequency supportability comments, see the use. instructions on the back of the Foreign Coordination General Information Page. ITEM 10 - Other J/F 12 Application Number(s). Mark appropriate block(s) and enter J/F 12 number(s) for superseded and/or related application(s). DOD GENERAL INFORMATION PAGE ITEM 11 - Operational Requirement. If this equipment will operate ITEM 1 - Application Title. Enter the Government nomenclature of with the same or similar equipment used by other US Military the equipment, or the manufacturer's name and model number, and Services, DoD Components, US Government Agencies or Allied a short descriptive title. Nations, mark "Yes," and specify in Item 13, "Remarks," the Services, Agencies or countries (to include the country's services). ITEM 2 - System Nomenclature. Enter the nomenclature of the system for which this equipment is a subsystem, e.g., PATRIOT or ITEMS 12 and 13 - Self-explanatory. Global Positioning System. DD FORM 1494, AUG 96 DoD General Information Page (Back)


Document Created: 2014-06-10 10:33:44
Document Modified: 2014-06-10 10:33:44
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC