emission info for our research project

0192-EX-PL-2016 Text Documents

Hewlett Packard Enterprise

2016-03-10ELS_173967

Emission Information In our research project, we are using an equipment that is a nano-cell LTE base station manufactured by ip.access (Model: nanoLTE E40). This base-station follows standards and specifications identified by 3GPP for LTE communication. This base station supports the following frequency bands: For each of the 4 frequency bands above, the emission characteristics are the same, and are as described below: 1. Necessary bandwidth: 10 MHz. This is computed based on 15KHz sub- carriers LTE uses to carry digital information. The necessary bandwidth includes 1MHz guardband. 2. Type of modulation: W. LTE uses QAM modulation that is both an amplitude and phase modulation scheme. 3. Nature of signal modulating the main carrier: 7. LTE uses several 15KHz subcarriers to carry digital information. 4. Type of information: D. LTE provides a data bearer. 5. Emission Designator: 10M0W7D


Document Created: 2015-03-27 10:20:31
Document Modified: 2015-03-27 10:20:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC