Amplifier Manual

0681-EX-CN-2018 Applicant Eligibility

HP Inc

2018-09-24ELS_216657

GLI-METRO-G KEY FEATURES » Precise control over output signal level » High Frequency Selectivity - Passes GPS, GLONASS & GALILEO frequencies while rejecting other out-of-band signals. » Continuous Built-In-Testing (BIT) » Automatic Oscillation Detection » Perfect for aircraft hangars, manufacturing test cells, R&D GLI-Metro-G facilities, any automated test environment or an anechoic INTRODUCTION chamber The GLI-METRO-G is a GNSS* smart amplifier, perfect for the commercial and public sector. When used in conjunction with an active GPS/GLONASS receive antenna, it will pass » Use for any GNSS retransmission GPS+GLONASS signals inside a building, hangar or any structure where signal is not accessible. application It can be used in an automated test environment or in a shielded room that needs GNSS signal. GLI-METRO-G has the unique benefit of allowing selection for the power control between signals. OPTIONS A user can easily decide which signal output the GLI-METRO-G will use to control signal power: » Waterproof GPS+GLONASS, GLONASS only or GPS only. This reduces the need for multiple antennas, » L1 Only vs. L1/L2 Filtering receive devices and multiple antenna runs, while lowering maintenance and installation costs. » Multiple Connector Types AUTOMATIC SIGNAL LEVEL CONTROL » Power Always ON or Power The GLI-METRO-G employs an automatic control to maintain the set output signal level, ON/OFF regardless of the uncertain loss or gain in the receive antenna cable network. Derived from high performance systems for military applications, this device allows precise determination over effective radiated power (ERP) levels, regardless of the uncertain loss or gain in the receive antenna cable network. It will automatically condition the signal and prevent changes in performance. BUILT-IN TROUBLESHOOTING The GLI-METRO-G will identify and isolate the following: - Oscillation condition - Internal component failure - High gain - Less than four satellites - Low gain - No satellites with adequate signal - Short/Open circuit (call for complete list of conditions) *GLI-Metro-G offers support for present and future GNSS signals, including Galileo, ensuring operation with future devices. www.gpssource.com AS9100 Rev C and ISO 9001 Certified GPS Source, Inc. | techsales@gpssource.com | (866) 289-4777 toll free (in U.S.) | +1 (719) 561-9520

GLI-Metro-G GLI-METRO-G 1X1 GLI-METRO-G OUTPUT PORTS » Number of ports 1 GLI-METRO-G ELECTRICAL SPECIFICATIONS » Input/Output impedance 50Ω » SWR all ports (typical) 3.9 in. / 99 mm Input: 2:1 Output: 2:1 » Bandwidth GPS & GLONASS L1 1560-1615 MHz GPS & GLONASS L1/L2 1170 - 1310 MHz » Gain (nominal) 33 dB » Gain Range 0-55dB 6.4 in. / 162.6 mm » Gain flatness <3 dB » Noise figure <3 dB » AC input level 110 VAC 230VAC UK 230VAC European » DC input level 16 - 28 VDC » Active Antenna Output Power Supply Output 6.8V GLI-METRO-G PHYSICAL SPECIFICATIONS » RF connectors N (m, f) SMA (m, f) TNC (m, f) SMB (f) SMC (f) » RS232 serial connector DB9(F) DCE » Weight: 1x1 1.2 lbs (544.3 g) » Size: 1x1 6.4” x 3.9” x 2.0” (162.6 mm x 99 mm x 50.8 mm) » Operating temperature -40 to +85ºC AS9100 & ISO 9001:2008 Certified Veteran Owned Small Business CCR Registered CAGE: 1RTJ5 DUNS: 883995677 NAICS: 334220, 334290, 334511, 541330, 541690 www.gpssource.com AS9100 Rev C and ISO 9001 Certified GPS Source, Inc. | techsales@gpssource.com | (866) 289-4777 toll free (in U.S.) | +1 (719) 561-9520


Document Created: 2015-02-19 17:15:49
Document Modified: 2015-02-19 17:15:49
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC