Exhibit 1

0814-EX-CN-2019 Text Documents

BAE Systems Information and Electronic Systems Integration Inc.

2019-10-14ELS_239558

Exhibit 1 1. Introduction By the instant application (“Application”), BAE Systems Information and Electronic Systems Integration Inc. (“BAE Systems”) requests that the Commission grant a 2 year conventional experimental license to permit BAE Systems to operate the facilities (the “Facilities”) specified in the instant application. 2. Purpose of the Operation The testing conducted by BAE Systems is a critical part of the manufacturing and delivery of military systems provided to the Armed Forces in support of their efforts. In support of both Internal Research and Development as well as the contract listed below, the purpose of these tests (an extension of the operations previously authorized under STA under call sign WO9XIK, with the only changes being: (i) modification of 175-225 MHz band to 175-215 MHz, 220 MHz and 225 MHz; and (ii) deletion of 454.4 MHz) is to measured gain over field of view of an antenna that is a critical part of the system delivered to the customer. Testing will be done using program developed antennas and range supplied RF measurement equipment. This testing is required to verify total system performance. 3. Contract Information The contract information associated with the operation under this Application is as follows: Agency/Customer: US Air Force Contract Number: FA8650-17-C-8578 Contract POC: James Blackston (937) 656-9900 - James.blackston@us.af.mil 4. Waiver of Station ID Requirements Waiver of the Station ID rules set forth at Section 5.115 is respectfully requested. 5. Other Issues A. Transmit Directionality The experiment requires transmission from this location. Station North Latitude West Longitude Reference Transmit Direction 1 42-48-18 71-25-34 LIT1C 34 degree Line of Range Bearing (LOB)

B. Antenna Data For the convenience of the Commission, the following chart defines certain specifications relating to the directional antennas that are to be used in the experiment: Mfg. Model Frequency Gain BW Number Range Sunol JB6 30 – 6000 MHz < 1.1 dBi 100-150 MHz, Freq E-Plane H-Plane Sciences < 4.4 dBi 150-200 MHz, MHz deg deg < 6.4 dBi 200-500 MHz 100 90 360 150 80 180 200 56 100 250 60 120 500 60 100 C. RF Source An HP 8341B Synthesized Sweeper (10 MHZ – 20 GHz), or equivalent will be used as the RF Source for these operations. D. Additional Signal Amplification Additional signal amplification is necessary to achieve a useful signal to noise ratio for the received signal. The output power of the system will be measured and verified to meet the radiated output power limits set forth in the license. Mfg. Model Number Frequency Range Gain Mini-Circuits TVA-11-422A+ 10-4200 MHz +40 dB (or equivalent) E. Prevention of Interference BAE Systems hereby advises the Commission that the tests to be conducted under the requested Commission authorization are to be conducted near the center of BAE Systems’ Litchfield, New Hampshire facilities. Such location will result in the separation of the test facilities from other existing transmit or receive facilities. F. Stop Buzzers Primary: David Jillson - (603) 484-1024 Alternate: BAE Systems Emergency Services Center - (603) 885-3842


Document Created: 2019-11-02 20:52:19
Document Modified: 2019-11-02 20:52:19
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC