Datum:
NAD 83
Is a directional antenna (other than radar) used?
No
Exhibit submitted:
No
(a) Width of beam in degrees at the half-power point:
(b) Orientation in horizontal plane:
(c) Orientation in vertical plane:
Will the antenna extend more than
6 meters above the ground, or if mounted on an existing building,
will it extend more than 6 meters above the building, or will
the proposed antenna be mounted on an existing structure other
than a building?
Yes
(a) Overall height above ground to tip of antenna in meters:
(b) Elevation of ground at antenna site above mean sea level in meters:
(c) Distance to nearest aircraft landing area in kilometers:
(d) List any natural formations of
existing man-made structures (hills, trees, water tanks, towers,
etc.) which, in the opinion of the applicant, would tend to shield
the antenna from aircraft:
There will be multiple test locations of two types. Locations will be existing buildings and the antenna will not exceed six meters above the roof top. Cranes may be used immediately adjacent to existing tower structures that are FAA compliant and our proposed antenna height will not exceed the overall height of the existing tower structure. Therefore, all test locations will be FAA compliant.
|
Datum:
NAD 83
Is a directional antenna (other than radar) used?
No
Exhibit submitted:
No
(a) Width of beam in degrees at the half-power point:
(b) Orientation in horizontal plane:
(c) Orientation in vertical plane:
Will the antenna extend more than
6 meters above the ground, or if mounted on an existing building,
will it extend more than 6 meters above the building, or will
the proposed antenna be mounted on an existing structure other
than a building?
Yes
(a) Overall height above ground to tip of antenna in meters:
(b) Elevation of ground at antenna site above mean sea level in meters:
(c) Distance to nearest aircraft landing area in kilometers:
(d) List any natural formations of
existing man-made structures (hills, trees, water tanks, towers,
etc.) which, in the opinion of the applicant, would tend to shield
the antenna from aircraft:
There will be multiple test locations of two types. Locations will be existing buildings and the antenna will not exceed six meters above the roof top. Cranes may be used immediately adjacent to existing tower structures that are FAA compliant and our proposed antenna height will not exceed the overall height of the existing tower structure. Therefore, all test locations will be FAA compliant.
|